
LP-3CV-072 Package Contents
1 LT-803-072 Stationary 3-Channel FM Transmitter
1 LA-207 12 VDC Power Supply and Line Cord
1 LA-123 90° Helical Antenna (72 MHz)
4 LR-200-072 Standard 3-Channel FM Receiver
4 LA-161 Single Ear Bud
1 LA-304 Assistive Listening Notication Signage Kit
Setting up the transmitter
Plug antenna into back of the transmitter.
1
2
Plug audio source into back of the
transmitter.
The LT-803-072 accepts a balanced
XLR or 1/4” (TRS), an unbalanced pair of
RCA (phono) connectors or both.
Set input switches to match input gain.
3
Input 1 accepts either a line, mic, or mic
with phantom power. Input 2 can be
adjusted to match the audio level
coming in (-10 dBU or + 10 dBU).
4
Connect AC power to the unit.

Alkaline
Battery Select
Channel Select
NiMH
Alkaline
Battery Select
Channel Select
NiMH
Adjusting the transmitter
Frequencies
A= 72.1 MHz
E= 72.9 MHz
H= 75.9 MHz
5 6 8
Press power button
to turn unit “ON”.
Turn to adjust the audio
level of input 1,2 or both.
Setting up the receivers
Set receiver channel switch.
9
Transmitter and receiver must
be on the same channel.
Insert Batteries.
10
Requires two (2)
Alkaline or NiMH
batteries. Set battery
select switch to
appropriate battery type.
7
Turn to adjust the
“Mix Level”.
Push the channel up/down
buttons to select a channel for
use. Press and hold channel
up button for 3 seconds to lock
on/off channel. Press and hold
the down button for 10 seconds
to activate program mode. To
toggle process on and off while
in program mode, press up.
Plug the LA-161 earphone
11
into the receiver jack.
Turn wheel to power
12
unit and adjust
receiver volume.
For further details regarding advanced options for your Listen products
please visit our website at www.listentech.com Resources/Support/Manuals.

Listen Technologies Corporation
14912 Heritagecrest Way
Bluffdale, Utah 84065-4818, U.S.A.
+1.801.233.8992
+1.800.330.0891
+1.801.233.8995
North America
fax
www.listentech.com
© 2008 Listen Technologies Corporation
®
All Rights Reserved 040408