1. Packing List
HDMI cable
Digital optical cable
2. Parameter
Dimensions
Speakers
Power
Frequency
Separation
S/N Ratio
Interface
Input Voltage
Gross weight
SoundBar
Coaxial cable
Stereo RCA to
3.5mm audio cable
(L)900*(D)98*(H)60mm
Full-Range Driver: 44*66mm *4
60W Max (40W RMS)
60Hz-18KHz
45dB
78dB
HDMI(ARC), AUX, COX, OPT, USB, SUB OUT
AC 100V-240V 50/60Hz
3.3Kg
Power adapter
User manual
Remote control
3. Function Description
Ports
1 2 3
ARC
SUB Out
Sub output: We reserve this upgrade interface, the users can
connect it to your subwoofer and create a bass system.
ARC: Using the HDMI cable, connect the HDMI(ARC) connector on
the sound bar to the HDMI ARC connector on the TV.
USB: Automatically identifies and plays tracks from a storage device.
AUX: Connect to the RCA jack of the source device using a 3.5 to
RCA cable.
OPT: Connect to the OPT OUT jack of the source device using a
optical cable.
COX: Connect to the COX OUT jack of the source device using a
coaxial cable.
7
Power: Connect to 100~240V power supply.
4
USB AUX OPT COX
6 75
DC IN
15V 2.4A
2. Display Screen
Sound effect
Volume
Audio source
Sound effect: You can select from 3 sound modes, the icon will light
up once enter the corresponding mode.
MUS: music mode
NEWS: news mode
MOV: movie mode
Volume: The volume level can be set between 1 and 30, 18~20 is
advisable.
Shows audio input temporarily: Select the audio source through
touch screen or remote control, the screen will show audio input
for 3s, and then back to volume.
Audio input: Select the audio source to input through touch screen
or remote control, the corresponding icon will light up once this
audio source enter successful.
ARC: ARC input (your device must support HDMI ARC output)
BT: Bluetooth input
AUX: Stereo aux input
OPT: Digital optical input
COX: Coaxial input
USB: USB input, the playback time will display on volume area
Operation (Touch Screen)
Volume
ON/OFF
Input selection
ON/OFF: Touch the icon for 3s to turn on/off.
Input selection: Touch the button and the "BT/AUX/OPT/COX/ARC/
USB" icons will light up if the corresponding audio source is connected.
Remote Control
ON/OFF
Mute
BT/Pair
Short press this button to select
BT mode, long press to remove
the previously paired device and
enter pairing mode.
1
BT/Pair
2
MUS
Audio Source
Selection
3
Sound Effect
PAIR
MOV
NEWS
Audio Source Selection
Press the button, the icon (BT,
AUX, OPT, ARC, USB) will light
up if the corresponding audio
source is connected.
Sound Effect
MUS: music mode
NEWS: news mode
MOV: movie mode
4. Wall Mount
Place it on the cabinet
Installation Steps
Important:
User research shows, most users prefer to place speakers on cabinet in
order to keep the wall clean. The height of this speaker is only 60mm,
which is very suitable for placing in front of the TV, so there is no
mount kit in the package. Please contact us if you need mount kits.
Mount it on the wall
(mount kit needed)
5. Wired Connection
Plug into the power supply, the display screen will show "-" which means
the soundbar is standby mode (do not turn on until audio connection
completed).
There are five ways to connect the soundbar and the audio source: AUX,
OPT, COX, USB, HDMI(ARC). Select one according to the device you are
trying to connect, the corresponding icon will light up once this audio
source enter successful.
Notes:
1. The default audio output mode of most TVs is self-contained speaker,
so after connect this soundbar with your TV by OPT, COX, ARC, please
set the TV audio output mode manually according to the audio cable
connect with the soundbar.
2. If you choose HDMI(ARC) connection, please make sure your TV or
devices support the HDMI ARC feature.
TV's HDMI ARC is disabled by default, so please set TV for ARC mode.
HDMI ARC port and mode on TV may be differently, please check the
TV user manual for details.
If your TV doesn't support HDMI ARC, you can use the included optical
audio cable to connect to the optical port on your TV.
6.
Wireless Connection
1. Turn on the device, touch the icon on the control panle or press the
button on the remote control, the "BT" icon will flash slowly on the
screen indicating the soundbar has entered paring mode.
2. Search for "Listener Pro 100S" on your bluetooth device and then
pair to the soundbar. The BT icon will illuminate, and the soundbar
will make an audible beep to indicate the connection is complete.
Notes:
1. If your device asks for a password during the pairing process, please
use "0000"
2. If you can't find or pair to this bluetooth, turn off the soundbar, then
5s later turn it on and try to connect by following the instructions
above.
3. The soundbar can only pair to one device at a time, if you can't pair
your device , please check that no other device is already paired with
the soundbar. A previously paired device will automatically reconnect.
4. Bluetooth connection range is 5-8m, but it will be shorter by some
causes-radio interference such as WIFI routers, induction cookers and
smart air cleaners; too much bluetooth your device paired and
reserved .
7. Automatic Standby
To save power and extend the working time of the speaker, it will
automatically switch to Standby mode if there is no input signal for over
15 minutes., and will turn back on when an input signal is detected.
8. After-sales Services and Warranty
1. 30-Day Return of Any Reason. You may return your undamaged
product and packaging within 30 days, please return the unit in its
original carton.
12-Month Warranty for Quality-Related Issues. If it is not qualityrelated, the customer must pay the return shipping costs and
repair costs.
2. When after-sales service is needed, please fill in the relevant
information according to this form.
3. If you have any questions or comments, please contact us at
service@listenerpro.com or visit our website: www.listenerpro.com.
Name
Address
Date of
Purchase
Fault
description
Email
Order ID
9. The Toxic and Hazardous Substances or Elements
Toxic or harmful substances or elements
Mercury
Part Name
PCB part
Plastic part
Metal part
Speaker
Power adapter
This form was prepared in accordance with the provisions of SJ/T 11364.
: Indicates that the content of the hazardous substance in all homogeneous
materials of the part is below the limit requirement specified in accordance
with the GB/T 26572.
: Indicates that the content of the hazardous substance in all homogeneous
materials of the part is exceeding the limit requirement specified in accordance
with the GB/I 26572. There is no mature alternative solution that meets the
requirements of RoHS.
The numbers in this mark indicate that the environmental protection use
period of the product under normal use is 10 years. Some components may
also have an environmental protection use period indication, and the
environmental protection use period is subject to the figures in the indication.
Due to different product models, the product may not include all the above
parts except the host, please refer to the product packaging.
Only suitable for areas below altitude of 2 000 m.
Only for use in non-tropical climates.
深圳市烁音科技发展有限公司
Listener Pro Technology Co.,Ltd.
Web: www.listenerpro.com
Email: service@listenerpro.com
Lead
Cadmium
Hexavalent Chromium
Polybrominated biphenyls
User Manual
LP-WS100S Soundbar
The speaker reaches full acoustic performance after it has
played music for about 7 days at 2/3 volume
Contact us to get:
1. After Sales Service
2. Wall Mount Bracket Kit
3. Promotion Code for next
Purchase
Loading...