Product information
Motorbike 4T 10W-40 Basic Offroad
Description
Heavy-duty motor oil based on selected mineral oils.
Ensures optimum performance and protection of the
engine under all operating conditions. Reliable lubrication, optimum noise damping and low wear are just
as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on
engines with catalytic converters.
PI 17/09/01/2018
Properties
high wear resistanceespecially suitable for wet clutchesguarantees low oil consumptionoptimum stability to agingoptimum lubrication under all operating conditionstested for catalytic convertershigh shear stabilityhigh engine cleanliness-
Specifications and approvals:
API SL ∙ JASO MA2
Technical data
SAE class (engine oils) 10W-40
SAE J300
Density at 15 °C 0,860 g/cm³
DIN 51757
Viscosity at 40 °C 95,0 mm²/s
ASTM D 7042-04
Viscosity at 100 °C 14,6 mm²/s
ASTM D 7042-04
Viscosity at -25°C (CCS) <= 7000 mPas
ASTM D 5293
Viscosity index 160
DIN ISO 2909
Pour point -36 °C
DIN ISO 3016
Flash point 224 °C
DIN ISO 2592
Evaporation loss (Noack) 11,0 %
ASTM D 5800-08 Method
B
Total base number 6,5 mg KOH/g
DIN ISO 3771
Color number (ASTM) L 2,5
DIN ISO 2049
Areas of application
Specially developed for air and water-cooled 4-stroke
engines exposed to increased loads off-road. Suitable
for Enduro and motocross motorbikes, quads, SxS
and snowmobiles with and without a wet clutch.
Application
The operating instructions of the engine manufacturers must be followed.
Note: Optimum effectiveness only when the product
is used on its own (i.e. no mixing).
Available pack sizes
1 l Canister plastic 3059
BOOKLET
4 l Canister plastic 3062
BOOKLET
Our information is based on thorough research
and may be considered reliable, although not
legally binding.
LIQUIMOLY GmbH
Jerg-Wieland-Str. 4
89081 Ulm-Lehr
Postfach 2829
89018 Ulm
Germany
Phone: +49 (0)731/1420-13
Fax: +49 (0)731/1420-82
e-mail: info@liqui-moly.de
Service-hotline: 0800/8323230
Technical hotline: +49 (0)731/1420-871
www.liqui-moly.de
Loading...