!
!
1300 699 788
info@liquifi.com.au
!
!
!
!
!
!
Lifestyle Series
LWB-47MBE INSTALLATION GUIDE
!
!
!
!
THANK YOU
Thank you for selecting a Liquifi Mirror Frame TV.
ABOUT THIS GUIDE
This guide will assist in the installation and use of the Liquifi Lifestyle Series of
Mirror Frame Full HD LED televisions.
For further assistance please go to www.liquifi.com.au or call 1300 699 788.
APPLICABLE MODELS
This guide is applicable to the LWB-47MBE, 47inch Mirror Frame TV.
PACKAGE CONTENTS
Your television package should consist of the following:
1. Television Unit
2. AC Power cord
3. Remote control
4. Bracket for surface mount or concealed, recessed installation
5. Mounting hardware
6. Frame
7. Frame Fixing hardware
If any items are missing, please contact your dealer.
!
!
!
RECOMMENDED INSTALLATION LOCATION
The environment in which the television mirror product is installed will affect the
product’s performance. The key factor to consider for proper installation is
surrounding and ambient light. Use the following guidelines to maximize the
performance of the Liquifi product:
TYPE OF LIGHTING
Avoid direct natural sunlight and excessive fluorescent lighting on the television
display. These conditions will diminish the television brightness, and hinder its
performance.
LIGHT DIRECTION
Avoid directing lights toward the mirror. Position lights such that they provide light
on the person or object to be reflected, not the mirror itself. For example, lights on
the wall next to the mirror are preferred over lights located on the ceiling in the
center of the room.
BACKGROUND COLORS
Sidewalls and furnishings that are dark, uniform, and non-reflective will provide for
better performance of the television quality. Bright colors, patterns, and
contrasting colors will minimize the quality of the display. !
!
!
MIRROR RECOMMENDED CARE
Our patented mirror technology has been developed to completely protect the
mirror surface and allow ease of maintenance for the consumer. Please follow the
guidelines listed for proper mirror care and cleaning:
• The glass surface can be cleaned
with any conventional nonammoniated glass cleaner. Care
should be taken to use only a
soft lint-free cloth. Apply all
cleaners directly to the cloth and
not the mirror surface.
• Never saturate the mirror surface
as residual cleaner may seep
behind the mirror.
• Stubborn spots can be removed
with solvents such as mineral
spirits, de-natured alcohol, and
acetone, Immediately remove
solvent and dirt residues per the
prescribed methods above with a
compatible glass cleaner or
water.
!
!
!
IMPORTANT SAFETY INFORMATION
WARNING: READ ALL INSTRUCTIONS AND REVIEW ALL DRAWINGS BEFORE
ATTEMPTING TO INSTALL, AND OR SERVICE, THIS PRODUCT.
When installing and during use of this product, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and/or injury to
persons including the following:
• Inspect the desired location for installation and be aware of all electrical
wiring pathways, water pipes, gas lines, or other potentially hazardous
conditions that may exist to protect from accidental damage during
creation of on-site conditions.
• All required electrical specifications are adhered to and have been installed
by the appropriate individuals and are code approved.
• All framing requirements, if needed have been completed to building code
and pose no structural issues.
• It is REQUIRED that this product is plugged into an electrical outlet
protected by a Ground Fault Circuit Interrupter (GFCI) to protect against
electric shock, fire, and/or injury. Failure to do so will void any warranty for
this product.
• Only qualified individuals should attempt to service the product. Removing
covers can expose you to high voltage and other dangerous conditions.
• To protect against electric shock, do not immerse the power cord, power
plug, or product in water or other liquid.
• Do not overload AC outlets or extension cords. Overloading can cause fire
or electric shock.
• Close adult supervision is necessary when any product is used by or near
children.
• Do not operate any product with a damaged cord or plug or operate it after
the appliance malfunctions or has been damaged in any manner.
• Do not let the power cord come in contact with hot surfaces.
• To electrically disconnect the product, turn OFF the product, then remove
the electrical power plug from the outlet.
• Do not use this product for other than intended use.
• This product is only intended for use indoors.
• This product is not waterproof. Do not immerse this product in water and/or
expose to dripping or splashing water as this could cause an electrical
hazard.
!
!
INSTALLATION INSTRUCTIONS
!
!
!
!
!
!
!
!
!
!
INSTALLATION OVERVIEW
The mount solution is provided in two pieces. A left and right mount. Each mount
is fixed to the wall, at a specific width apart. The TV then hangs on these mounts.
The frame is secured to the TV via M3 screws.
!
WARNING
• Do not handle or remove your television mirror from the packaging until it is
ready to be installed.
• To avoid damage to the television mirror, only transport it in a vertical
position.
• It is highly recommended that at least three (3) persons assist in the
installation of the television mirror.
• Mirror suction cups are not recommended for use in the installation of your
!
!
!
!
ORDER OF INSTALL
1. Secure mounts
2. Test Hang TV
3. Remove TV
4. Install Frame
5. Connect Inputs and Power
6. Hang TV
TELEVISION INSTALLATION TASKS
1. Determine desired installation location
Consider the information provided in the location recommendation.
2. Ensure power supply is within 1m of your desired installation location
If a power point is required to facilitate installation, please refer this work to
a licensed electrician. For an install where no power or input cables are
visible, a wall access point should be installed directly behind the input
panel at the rear of the television.
3. Verify that the rough opening is to required dimensions for your
television (Not applicable for surface mounting)
The size of the recess is dependent on the model and size of the television
you have purchased. Dimensional information is available at
www.liquifi.cm.au
4. Install mounting brackets
Mount the brackets to a secure reinforced wall section, such as frame studs
in a brick veneer home. The mounts need to be a specific width apart to
allow the TV to hang between the left and right mount.
The distance between the centre bolt hole of the left bracket, to the centre
bolt hole of the right bracket is 1170.6mm. See Diagram overleaf.
!
!
NOTE:
1. Required width between the two mounts is 1170.6mm
2. The direction of mount placement is such that the section that secures
to the wall mounts outwards from the TV (see rear elevation image
above, for clarity).
!
!
!
!
!
!
!
5. Trial Hang the TV
Once the mounts are secure, trial hang the TV to ensure that the mounts
have been spaced the appropriate width apart. Mounting points on the TV
should align directly onto the mounting points of the left and right mount.
The mount points are designed with a wide opening to allow ease of
hanging.
Position television mirror close to wall surface and securely engage
mounting brackets.
Allow for a 1/4” ventilation gap for proper air flow and heat transfer.
!
!
!
!
!
!
!
!
!
6. Fix Frame to Television
Using the M3 screws and brackets provided fix the frame to the TV. The
Frame has 5 fixing points across the top, 5 across the bottom and 3 on
each side, for a total of 16 fixing screw points. Some frames will be
supplied pre-drilled. Others will require you to drill on site, aligning the
screw holes on the frame, with those already predrilled on the TV.
!
!
!
!
7. Run input cables to the installation location
You may choose to run a standard antenna cable (for Free to Air television),
HDMI (for Foxtel, and other video feeds) or other inputs.
8. Connect the TV
Connect the television to the power and input cables.
9. Turn the TV on, test for vision and sound
Test that the television, turns on, can read the connected inputs, and that
the sound works properly.
10. Troubleshoot if issues are encountered
If you have encountered issues during testing of the television, please refer
to section 2 for troubleshooting tips.
11. Finalise installation and Re-mount television
Re-mount the television as per step 5. Check to ensure the television mirror
is fully engaged and secure to the mounting brackets.
!
!
!
!
!
USE OF VESA MOUNTS STRICTLY PROHIBITED
!
!
!
!
!
!
!
!
!
!
WARNING
• This product is not designed for use with VESA compliant wall mounts.
• The screws at the rear of the TV may appear to be VESA compliant mounts
but are not.
• These screws are not to be removed under any circumstances
• Removal of these screws can be detected, and will void the warranty
!
!
!
!
TROUBLESHOOTING
ISSUE
RESOLUTION
No display
Check the power supply of TV, such as
AC/DC adapter, AC power outlet and
DC power connection.
Check input signal sources and its
cables, or if the TV is set to standby
status.
On screen prompt:
“No input” or
”Input Not Supported” or
“Out of Range”
Check inputs are connected at the TV
and at the source.
Check the resolution of the PC VGA
output. We recommend the resolution is
not higher than XGA 75Hz (for
15”TV), and no higher than SXGA 75Hz
(for 17” and 19” TV). The optimum
vertical refresh frequency of the
LCD is 60Hz.
Image position is not right
Select the “Auto Config” or manually
adjust the image.
There are “water waves“, ”twinkling
points”, or incorrect colour on the
screen
Check the cable of input signal source
and the quality of those signals.
The volume of speaker is too low or
distorted
Ensure that the speaker cables have not
been crossed during install (i.e. positive
to negative terminal connections).
Check the volume value, increase the
volume via adjusting the OSD menu and
check the sound source quality.
No sound
Confirm the sound control is not set to
mute.
Confirm the TV program or input signal
is supposed to have sound (It may be
silent).
!
!
Static or white noise screens are silent
in digital transmissions.
Confirm speaker switch at bottom of TV
is switched to “internal speakers” (when
no external speakers are connected)
For External Speaker connections:
Confirm speaker cable connections.
Check speaker wires for damage.
There are striped bands, or many
twinkling points on the screen; and
the colour is dark
Check whether the TV is disturbed by
other strong electrical sources nearby.
Some older appliances, or ones that do
not conform to current regulations, may
emit electrical interference (EMS).
Check if a local transmitter is causing
the interference.
Check if the power cable or AC adaptor
is too close to the antenna cable.
The TV image is not clear
Check the RF antenna quality, the RF
signal intensity and antenna connection
to the TV.
Try the manual TV search function.
Generally, the image quality of cable TV
tends to be better than an outdoor
antenna.
!
!
NOTES
!
!
!
WARRANTY
LIQUIFI WARRANTS THAT THE PRODUCT SHALL BE FREE FROM MATERIAL
DEFECTS AND DEFECTS IN WORKMANSHIP FOR A PERIOD OF ONE (1)
YEAR FROM THE DATE OF PURCHASER’S RECEIPT OF THE PRODUCTS.
SUCH WARRANTIES DO NOT EXTEND TO COMPONENTS OF THE
PRODUCTS THAT ARE FURNISHED TO LIQUIFI, BUT NOT MANUFACTURED
BY LIQUIFI, IF THE MANUFACTURER OF SUCH COMPONENTS EXTENDS A
WARRANTY TO LIQUIFI IN WHICH EVENT, LIQUIFI SHALL EXTEND THAT
WARRANTY TO PURCHASER, BUT ONLY TO THE EXTENT THAT THE
WARRANTY IS EXTENDED BY THE MANUFACTURER OF THE COMPONENT
TO LIQUIFI.
NOTICE OF ANY WARRANTY CLAIM MUST BE RECEIVED BY LIQUIFI, IN
WRITING, PRIOR TO THE EXPIRATION OF THE WARRANTY PERIOD.
LIQUIFI’S WARRANTY IS LIMITED SOLELY TO THE ABOVE AND APPLIES
ONLY FOR THE PERIOD SET FORTH. LIQUIFI WILL NOT BE LIABLE FOR ANY
LOSS, DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF
ANY KIND, WHETHER BASED UPON WARRANTY, CONTRACT,
NEGLIGENCE, OR STRICT LIABILITY, OR ARISING IN CONNECTION WITH
THE SALE OR USE OF THE PRODUCTS.
IN ALL EVENTS, LIQUIFI’S MAXIMUM LIABILITY TO PURCHASER RELATED
TO ANY WARRANTY CLAIM OR DEFECT WITH RESPECT TO THE PRODUCTS
SHALL NOT EXCEED THE CONTRACT PRICE FOR THE SPECIFIC PRODUCTS
CLAIMED TO BE DEFECTIVE OR UNSUITABLE, OR ALLEGED TO HAVE BEEN
THE CAUSE OF ANY DAMAGE TO PURCHASER OR ANY THIRD PARTY. THE
FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, ORAL, EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES. OF FITNESS FOR A PARTICULAR PURPOSE.
THE PROVISIONS OF THIS SECTION SHALL BE APPLICABLE TO BOTH
IMPLIED WARRANTIES (IF ANY) AND EXPRESSED WARRANTIES.
THIS WARRANTY MAY BE EXTENDED TO THREE (3) YEARS WITH THE
ADDITIONAL PURCHASE OF A THREE (3) YEAR WARRANTY.
Loading...