Lionel RTPGRXV2 User Manual
BOM #: 05-MAN-9400-11-L-17 Size: 8.5” x 5.5” Date: 2016-6-30
7-11000 Ready-to-PlayTM Series
Lionel
TM
Ready-to-Play
Train Set
Owner's Manual
Adult assembly required
Batteries not included
Packaging contains important information and should be kept
Congratulations!
ongratulations on your purchase of this Lionel Ready-to-Play train set. This set features
C
everything you need to get started – a wireless controller, a huge loop of easy-to-assemble
track, a string of detailed cars, a tender and locomotive.
Read this instruction manual thoroughly for important tips on operating and
maintaining your Ready-to-Play train set.
Set Inventory
• 1 Steam locomotive with head lamp, bell, and sounds
• 1 Tender
• 2 Rolling stock cars
• 24 Curved track sections
• 8 Straight track sections
• 1 Wireless controller
• 1 Owner’s manual
2
FCC and RSS Statements
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device complies with Industry Canada’s Licence-exempt RSSs. Operation is
subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
3
Table of contents
Track assembly and layout
Joining the track sections
Layouts
Battery installation and options
Installing 'AAA' batteries into the wireless controller
Installing 'C' batteries into the locomotive
Operating your train
Connecting the locomotive and tender
The wireless controller
Power activation button on the locomotive
Maintenance and operations
Battery warning
Cleaning the track
Troubleshooting
Limited Warranty/Lionel Service
5
6
7
8-9
10
11-13
13
14
14
15
16
The following Lionel marks are used throughout this Owner’s Manual and are protected under
law. All rights reserved.
®
, LionChief ™, LionChief Plus™, LEGACY ™, FasTrack®, TrainMaster®, Odyssey®, RailSounds®,
Lionel
™
CrewTalk
Traction
Lionelville
Celebration Series
Accessory Motor Controller
Controller
400
Lines
Choo-Choo
, TowerCom™, DynaChuff ™, StationSounds™, Pullmor®, ElectroCoupler™, Magne-
®
, CAB-1® Remote Controller, American Flyer®, Lionel ZW ®, ZW
®
, Wireless Tether™, Powerhouse™, LionMaster®, Conventional Classics™, Postwar
™
, TruRail™, PH-1 Powerhouse®, Powermaster®, Powerstation-Powerhouse®,
™
, AMC
™
, ARC
™
, Block Power Controller™, BPC
®
, Joshua Lionel Cowen Series™, Lockon®, TrainSounds™, MultiHorn™, MultiWhistle™,
™, Track Power Controller 300™, TPC 300™, Track Power Controller 400™, TPC
™
, SensorTrack™, Plug Expand Play™, Ready-to-Play™, Imagineering
™, Accessory Switch Controller™, ASC
™, Operating Track Controller™, OTC
®, MagniVision®, TMCC
™, Action Recorder
™, FatBoy™, Lionel
™
4
®,
Track assembly and layout
Joining the track sections
oin the track sections together by placing them on a flat surface and inserting the plastic
J
tabs of each track section into the corresponding openings of the next section. Press or
squeeze the ties together to connect. This may require the help of an adult. Recheck all track
connection points upon completing your layout to be sure they are secure.
To disassemble the track just lift one of the track sections slightly at an angle where they
join together and they will snap apart. See Figure 1.
The rails should be kept clean, dry, and free from oil, grease, and dirt. Clean the track
periodically with a clean soft cloth.
Figure 1. Assembling and disassembling the track
5
Loading...