Joining the track sections
J
oin the track sections
together by inserting the
pins of one track section
into the rail openings of
another. For good electrical
contact, pins must be carefully inserted and track
joints tightly fitted.
If the track is difficult to
connect, try this installation
tip. You can “break in” O27 track sections by inserting and withdrawing a track
pin into one rail at a time
before joining the entire track section.
If the openings become too large (causing
the track to fit loosely), pinch the rail
together around a track pin with a pair of
pliers. If any pins fall out of
the track and are missing,
replace them with extras
available from your Lionel
dealer.
Maintenance tip: The rails
should be kept clean, dry,
and free from oil and
grease. Clean rust and dirt
spots with a track eraser.
Wipe the track using a cloth
dampened with track cleaner from the Lionel maintenance kit
(no. 6-62927), available from your nearest
Lionel Authorized Value Added Dealer or
Lionel Service.
Track layout
3
Getting started
B
efore you do anything else, we recom-
mend you check the contents of your
set box to ensure all of the parts of your set
have been included and that the quantities
(when applicable) are correct.
The parts list below will tell you what’s
included and the correct quantities. If you
find any discrepancies, contact the dealer you
purchased your set from for more information or call 1-800-4-LIONEL for a service center near you.
Now comes the fun part—deciding what kind of layout you want. The only rule—
let your imagination be your guide.
• 4-4-2 Steam Locomotive 1
• Tender w/Air Whistle 1
• Jumping Hobo Boxcar 1
• Animated Gondola 1
• Square Window Caboose 1
• Hobo Campfire 1
• Smoke Fluid 1
• Controller 1
• 40-watt power pack 1
• Lockons 2
• Straight track 8
• Curved track 8
• Service Center list 1
• Warranty Card 1