Lionel Heritage Series Lincoln Funeral Train Owner's Manual
Lionel
Heritage Series
Lincoln Funeral Train
Owner’s Manual
71-1183-250
10/11
Lionel
Heritage Series
Lincoln Funeral Train
Owner’s Manual
2
C
ongratulations on your purchase of the Lionel Heritage Series Lincoln Funeral Train! This train
set is ready to run on any Lionel or Lionel-compatible O-27, O, or FasTrack layout.
Running the train set
C
arefully unwrap the locomotive and tender. Plug in the harness from the locomotive into
the front end of the tender.
The harness must be plugged into the connector on the front end of the tender in
order for the locomotive to operate.
Note!
Figure 1. Harness
Place the train set on the track, and connect the locomotive to the tender and cars as
shown in Figure 2 below. Power the train set with 8-12 volts AC.
Do not power with DC (direct current) or damage may occur.
Figure 2. Coupling the tender and cars
Note!
The following Lionel marks are used throughout this catalog and are protected under law. All
rights reserved.
Lionel
®
, LEGACY™, FasTrack™, TrainMaster®, Odyssey®, RailSounds®, CrewTalk™, TowerCom™,
DynaChuff
™
, StationSounds™, Pullmor®, ElectroCoupler™, Magne-Traction®, CAB-1® Remote
Controller, American Flyer
®
, Lionel ZW®, ZW®, MagniVision®, TMCC®, Lionelville®, Wireless
Tether
™
, Powerhouse™, LionMaster®, Conventional Classics™, Postwar Celebration Series™,
TruRail
™
, PH-1 Powerhouse®, Powermaster®, Powerstation-Powerhouse®, Accessory Motor
Controller
™
, AMC™, Accessory Switch Controller™, ASC™, Action Recorder Controller™, ARC™, Track
Power Controller 300
™
, TPC 300™, Track Power Controller 400™, TPC 400™, Block Power
Controller
™
, BPC™, Operating Track Controller™, OTC™, FatBoy™, Lionel Lines®, Joshua Lionel
Cowen Series
™
, Lockon®, TrainSounds™, MultiHorn™, MultiWhistle™, Choo-Choo
™
Locomotive/tender coupler
Drawbar connection between cars
Drawbar
Coupling post
To couple the passenger cars:
Lower the coupling post into the hole in the drawbar
Loading...