Lionel Goofy -Pete Jumping Boxcar Owner's Manual

Lionel

Goofy & Pete Jumping

Boxcar

Owner’s Manual

© Disney

73-6782-250

12/04

Congratulations

C

ongratulations on your purchase of the Lionel Goofy & Pete Jumping Boxcar! This product
features a Pete the Policeman trigger that causes Goofy to leap into the boxcar.

Please take special care when operating this product on your layout. Make sure that
Goofy will clear any objects next to the track as he runs along side your speeding
train.

Note!

The following Lionel marks may be used throughout this instruction manual and are protected under law.
All rights reserved.

Lionel

®

, TrainMaster®, Odyssey®, RailSounds®, CrewTalk™, TowerCom™, DynaChuff™,

StationSounds

™

, Pullmor®, ElectroCoupler™, Magne-Traction®, CAB-1®Remote Controller,

PowerMaster

®

, Lionel ZW®, ZW®, PowerHouse®, TMCC®, Lionelville™, Lockon®, Wireless Tether™,

LionMaster

®

, FatBoy™, American Flyer®, TrainSounds

™

The name FasTrack®is used with permission from Pitsco, Inc.

Table of contents

Installing the trigger with the FasTrack track system 3-5

Installing the trigger with traditional O and O-27 gauge track 6

Triggering the Jumping Boxcar 7

Limited Warranty/Lionel Service 8

3

Installing the trigger with the FasTrack track system

F

ollow these steps as you install the trigger with the FasTrack track system.

We recommend that you install the trigger on a straight section of track.

1. Locate the terminal housing on the underside of the roadbed. Refer to Figure 1.

Figure 1. Terminal housing

Note!

Ter minal housing