www.LINSAYdigital.com LINSAY-Art in Digital Technology- Copyright. All Right Reserved 2018
USER MANUAL
Models: X9000A4K
X9000A4K
ACTION CAMERA TRUE 4K
1
Dear Customer,
Thank you for purchasing the newest LINSAY X9000A4K Action Camera, please read
the instructions and suggestions carefully to ensure the best possible performance.
FCC Class B:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment can generate and radiate radio frequency energy and it
may cause harmful interference to radio communications if not installed and used in
accordance with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, this can be fixed by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet or a circuit different from where the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
1. Changes or modifications to the product without the responsible party
for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the Emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to the equipment(It is the responsibilities of the
user to correct such interference).
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
2
SAFETY ADVICES
READ CAREFULLY ALL THESE INSTRUCTIONS BEFORE USING THE DEVICE
AND PRESERVE THEM FOR ANY LATER NEED.
1. Please follow the rules depicted in this manual closely to ensure your
safety.
2. Be more wary of any edges, uneven surfaces, metal parts, accessories
and its packaging so as to prevent any possible injury or damage.
3. Keep this appliance out of reach of children. Take note that this
appliance is not edible and should not be placed in your mouth.
4. Do not modify, repair or dismantle the appliance. Doing so may result in
fires, electric shocks, complete breakdown of the appliance, etc. All of
which, are not covered under warranty.
5. Do not use any diluents or volatile liquid to clean the appliance. Keep in
mind that the surface of the appliance should only be wiped with a clean
dry cloth.
6. Do not use this appliance in locations whereby there are hightemperatures of high humidity levels; ideally, the appliance should be
used in location free of dust and exposure to direct sunlight.
7. Do not insert foreign objects, such as pins, into this appliance.
8. Do not touch this appliance when your hands are wet as this may results
in electric shocks.
9. Refrain from dropping the appliance as well any collision with other
objects.
10. Should any abnormal situations or problems occur while using this
appliance, discontinue use the appliance immediately.
11. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard
(*).
(*) qualified competent Person: technician of the after-sales service of the builder
(manufacturer) or the importer or every qualified, authorized and competent person
to make this type (chap) of repair.
3
THE BASICS
4
ACCESSORIES
5
MOUNTING YOUR CAMERA
Attach your camera to helmets, gear and equipment.
6
Insert the Battery
• Open the battery compartment on the bottom of the camera and slide in the battery.
• Keep the plastic pull tab facing you.
Insert the Micro Memory Card:
• Slide the memory card into the slot on the left side of the camera body.
• The lettering on the memory card should face rearwards towards the back of the camera.
To Power On:
• Long Press the Power/Mode button to turn on the camera
To Power Off
• Long Press the Power/Mode button to turn off the camera
OVERVIEW
Turn camera ON and repeatedly press the Power/Mode Button to cycle through camera
modes and settings.The modes will appear in following order:
Video :Record Video
Photo : Capture a single photo
Burst: Capture photo burst
TL Video : Record Time Lapse Video
TL Photo: Shoot a series of photos at set time intervals
Video Playback
7
Photo playback
Setting : adjust camera settings,resolution and more
VIDEO MODE
1.To record video,verify the camera in video mode.If the video icon on your camera’s LCD
screen is not showing,press the Power/Mode button repeatedly until it appears
2.To start recording:
Press the Shutter/Select Button.The camera will emit one beep and start recording.
3.To stop recording:
Press the shutter/Select Button. The camera emits one beep to indicate recording has
stopped.
This camera auto stops recording when the battery is out of power.
PHOTO MODE
Photo(14M)
To capture a photo,verify the camera in photo mode.If the photo icon on your camera’s LCD is
not showing,press the Power/Mode Button repeatedly until it appears
To take a photo:
Press the Shutter/Select Button.The camera will emit the camera shutter sound.
BURST MODE
Burst
8
To capture a Burst series,verify the camera in Burst mode.If the Burst icon on your camera’s
LCD is not showing,press the Power/Mode Button repeatedly until it appears.In Burst
mode,your camera takes 3 photos/1 sec,7 photos/2 sec,15 photos/4 sec
To take a Burst series:
Press the Shutter/Select Button.The camera will emit the camera shutter sounds.
TL(TIME LAPSE) VIDEO
TL(Time Lapse)Video
To record TL(Time Lapse)video,verify the camera in TL video mode.If the TL video icon on your
camera’s LCD screen is not showing,press the Power/Mode button repeatedly until it
appears.In TL Video mode, your camera captures a series of photos at
0.5,1,2,3,4,5,10,15,20,30 or 60 second intervals
To record a TL video:
Press the Shutter/Select Button.The camera will emit on beep and start recording.
TL(TIME LAPSE) PHOTO
TL(Time Lapse)photo
To record TL(Time Lapse)photo,verify the camera in TL photo mode.If the TL photo icon on
your camera’s LCD screen is not showing,press the Power/Mode button repeatedly until it
appears.In TL photo mode, your camera captures a series of photos at 3,5,10,30 or 60 second
intervals
To record a TL Photo:
Press the Shutter/Select Button.The camera initiates countdown and emits the camera
shutter sound each time a photo is taken.
9
VIDEO/PHOTO PLAYBACK
Video Photo
Playing back videos and photos
To enter the playback menu:
1. Press the Power/Mode Button to select video playback or photo playback
2. Press the shutter/Select button to enter the playback menu
3. Use Power/Mode button to cycle through the carious options
4. Press the shutter/Select button
5. To return to the playback menu,press the WI-FI Button.
SETTING
Press the Shutter/Select Button to enter the settings menu .Repeatedly press the
Power/Mode Button to cycle through optional and press the Shutter/Select Button to select
desired option.To go back teh previous screen or exit the settings menu ,press the WIFI
Button
BATTERY
To charge the battery
Use the 1.5A USB charger( not included)and USB cable
10
*Charging Time: 3-4 Hours
CAMERA APP
Connecting to the XDV App.
The XDV App ets you control your camera remotely using a smartphone or tablet. Features
include full camera control, live preview, photo playback and sharing of select content and
more.
Download in advance the XDV App to your smartphone at the Apple App Store or Google
Play.
1. Press the Power/Mode button to turn the camera on.
2. Ensure the camera is in one of the Camera modes.
3. Press the UP button to turn on Wi-Fi. The orange light illuminates on the top of the
camera.
4. In your smartphone’s Wi-Fi settings, connect to the network called “Sport-Cameras”
5. Enter the Password 1234567890.
6. Open the XDV App on your smartphone.
To Turn Off Wi-Fi:
• Press and hold the UP button for one second to turn off Wi-Fi.
The XDV App is compatible with the following smartphones and tablets:
• Apple iOS
• iPhone5, 5s, 6(plus), 6s(plus)(iOS9), iPad Air and Mini (iOS9)
• Android
• Android 4X Quad-core devices
Note: Compatibility varies by device. Content playback, sharing and access to the memory
card might not be available on some devices.
1. Download the Sport-cam APP to your smartphone or table at the Google play or APPLE
APP Store :
2. Press the Power/Mode button to power camera on
3. Make sure the camera is in camera mode
4. Press the WIFI button to turn on the WIFI
5. In your smartphone or tablet’s WIFI settings,connect to the network called Sport-
cameras
6. Open the app on your smartphone or tablet
11
7. Press and hold the WIFI button for three seconds to turn off WIFI
2.4G REMOTE
Video
To Start Recording:
1. Verify the camera is in Video mode .
2. Press the Grey Video button . The Camera will emit one beep and the Camera light will
flash while recording.
To Stop Recording:
• Press the Grey Video button . The camera will emit one beep and the Camera Light
will stop flashing.
Photo
To Take a Photo:
1. Verify the camera is in Photo mode .
2. Press the Red Photo button . The camera will emit a camera shutter sound.
Replacing the Remote Battery
The remote uses a 3 Volt Lithium cell type CR3032.
• You will need a small jeweler’s screwdriver with a Philips or + tip.
• Your working area should be a flat surface like a table or desk so you do not lose the
screws.
12
To replace the battery in the remote control:
1. Remove the non-buckle end of the strap.
2. Flip the Remote over so you can see the back cover.
3. Remove the 4 screws in each corner. Do not remove them completely because it will be
easier to put the cover back on and you will be less likely to lose a screw.
4. Set the cover to the side.
5. Push the battery sideway out of its holder using your fingernail or the tip of the
screwdriver.
6. Slide in the new battery.
7. Put on the back cover.
8. Screw each screw back in. Tighten until the screw driver jumps once. Do not overtighten
9. Put the strap back through the remote.
10. Dispose of the lithium battery according to local, state or national regulations.
SAFETY PRECAUTIONS
• Do not subject the device to severe impact or drop it from heights.
• Do not use the device in extreme hot or cold, dusty or damp conditions.
Do not expose it to direct sunlight.
• Avoid using the device near strong magnetic fields.
• Normal functioning of the product may be disturbed by ESD. If so,
simply reset and restart the device following the instruction manual.
During file transmission, please handle with care and operate in a staticfree environment.
• Keep the device away from water and other liquids. In the event that
water or other liquids enter the device, power off the product
immediately and clean the device.
• Do not use chemicals to clean the device in order to avoid corrosion.
Clean it with a dry cloth.
• Do not install this equipment in a confined space such as a book case or
similar unit. The ventilation should not be impeded by covering the
ventilation openings with items such as newspaper, table-cloths, curtains
etc.
• No naked flame sources, such as lighted candles, should be placed on
the apparatus.
• Attention should be drawn to environmental aspects of battery disposal.
• Use the apparatus in moderate climates.
• We are not responsible for damage or lost data caused by malfunction,
misuse, modification of the device or battery replacement.
• Do not attempt to disassemble, repair or modify the product. This will
invalidate the warranty.
• If the device will not be used for an extended period of time, please
charge the battery at least once per month to maintain battery life.
• Charge the battery if: a) The battery level icon displays
13
• (An empty battery) b) the device powers off automatically when
restarted. c) There is no response when pressing keys with keys
unlocked and battery full.
• Do not interrupt the connection when the device is being formatted or
transferring files. Otherwise, data may be corrupted or lost.
• When the device is used as a portable HD, please use only per the
instructions. Otherwise, permanent data loss could occur.
• Please use and install data using the attachments/accessories provided
and only according to the manufacturer’s instruction.
• Please refer to the information on the bottom of the device for electrical
and safety information before installing data or operating the device.
• To reduce the risk of fire or electric shock, do not expose this device to
rain or moisture. The device should not be exposed to dripping or
splashing. Never place objects filled with liquids, such as vases, on the
device.
• There is danger of explosion if the battery is replaced incorrectly.
Replace only with the same or equivalent type.
• The battery (battery or batteries or battery pack) should not be exposed
to excessive heat such as sunlight, fire or the like.
• Please follow responsible procedures for battery disposal.
• If the power adaptor disconnected from the device, the device will
remain operable as long as the battery has sufficient charge.
• The power adaptor is a CLASS II apparatus with double insulation, and
no external ground is provided.
• Safety Symbol Explanation:
• -The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
• -To reduce the risk of electric shock, do not remove the cover (or back)
as there are no user-serviceable parts inside. Refer servicing to qualified
personnel.
• -The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
14
instructions in the literature accompanying the device.
• -Correct Disposal of this product. This marking indicates that this
product should not be disposed of with other household waste in the EU.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To dispose of your used device,
please use the return and collection systems available in your area or
contact the retailer where the product was purchased. They can take
this product for safe environmental recycling.
• This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
• CE in which countries where the product may be used freely: Germany,
UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland,
Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.
In France, except the channel 10 through 13, law prohibits the use of
other channels.
This manual may not reflect your actual device’s operation. All information is subject
to change without prior notification. Please follow your actual device’s operational
procedures
Warranty Policy
One Year Limited Warranty Parts and Labor
LINSAY provides a " 1 Year LIMITED WARRANTY" against manufacturing defects in
materials and workmanship to the original purchaser of a new LINSAY purchased from
an authorized LINSAY U.S., which begins on the date of purchase by the customer.
Customer is responsible for maintaining proof of date of purchase and must make the
registration of the product into of 30 days of the purchase on
http://www.linsaydigital.com/registration.php to validate the warranty.
LINSAY's Responsibility
LINSAY purchased new from an authorized LINSAY U.S. reseller and that are used in
the fifty (50) United States or Puerto Rico are warranted to be free from
manufacturing defects in materials and workmanship for one (1) year from the date of
the original retail purchase. LINSAY ' limited warranty covers only those defects which
arise as a result of normal use of the product, and do not apply to any improper or
inadequate maintenance or modification; software, interfacing, media, parts, or
15
supplies not provided or supported by LINSAY; or operation outside the product's
specifications.
If LINSAY receives, during the applicable warranty period, notice of a
defect in any hardware product, which is covered by LINSAY' warranty, LINSAY shall
either repair or replace the defective product at LINSAY' option.
If LINSAY is unable to repair or replace, as applicable, a defective product which is
covered by LINSAY' warranty, LINSAY shall within a reasonable time after being
notified of the defect, refund the purchase price for the product.
LINSAY shall have no obligation to repair, replace or refund until the customer returns
the defective product to LINSAY.
Units sent to LINSAY for repair will be repair or replaced with new or like-new product
(s) of the same model with the same functionality as the original unit. Original unit (s)
will be returned only at LINSAY' discretion. Please back up all content and files on the
device. LINSAY is not responsible for any content on the original unit.
LINSAY' limited warranty is only valid in the country of purchase.
LINSAY will not validate purchases made via trade or barter. This pertains to trade or
barter between individuals on sites such as E-Bay where trade or barter transactions
are facilitated.
LINSAY does not warrant damage incurred to the LCD on any unit sold. Any
manufacturer's defect is at the sole discretion and discernment of LINSAY repair
technicians as the unit will need to be in possession of the return authorization
number RAN technicians for a full and accurate evaluation to be made.
How to Obtain Warranty Service
To obtain warranty service, contact LINSAY Technical Support via email at
TechnicalSupport@LINSAYdigital.com or Call 305-979-5067 Proof of purchase in the
form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is within
the limited warranty period. The Bill of Sale, Receipt or Receipted Invoice must to be
presented as a pre-condition to obtaining the limited warranty service. LINSAY
Technical Support is available from 10:00AM to 5:00PM Eastern Time, Monday
through Friday, Please note that holiday hours may vary. For up to date information,
please visit www.LINSAYdigital.com .
LINSAY reserves the right to assess all warranty claims and to determine if defects or
damages are covered by this limited warranty. In case of a claim that is not covered
by this warranty, you will be contacted to determine whether LINSAY should repair
the damage for a fee or whether the product should be returned to you as received by
the service technician or service center.
Parts and service labor that are LINSAY's responsibility under this limited
warranty will be provided without charge. All other service is at the customer's
16
expense. LINSAY reserves the right to charge the customer for any service call for
anything not covered by this limited warranty. Before you ask for warranty service,
please review your User Manual. You may avoid a service call and a service charge.
Please refer to the reverse side of this page for additional information regarding how
to obtain warranty service.
PLEASE DO NOT RETURN YOUR unit TO LINSAY
WITHOUT PRIOR AUTHORIZATION.
Not Covered
This limited warranty does not cover the following: cosmetic defects;
damage, malfunctions or failures resulting from shipping or transit, improper or faulty
installation, abuse, operation contrary to furnished instructions, operation on incorrect
power supplies, products not supplied by LINSAY, modification, alteration, improper
servicing or tampering; damage from fire, water, lightning, power surges, abnormal
environmental conditions or other acts of nature; normal wear and tear;
unsatisfactory visual or audio performance not caused by a manufacturing defect; or
displays with a missing or unreadable serial number.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. LINSAY'S TOTAL
LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE
WHATSOEVER, INCLUDING LINSAY'S NEGLIGENCE, ALLEGED DAMAGE, OR
DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT,
SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
LINSAY SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, COMMERCIAL
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state. This is the only warranty applicable; no one is
authorized to extend or modify it or to grant any other warranty on LINSAY's behalf.
17
Owner's Responsibility
To ensure warranty service, keep the dated bill or sales receipt as evidence of the
purchase date and location. This limited warranty applies only to original purchaser
and is non-transferable. Warranty service conditions are subject to change. For the
latest Warranty Terms and Conditions and additional information regarding LINSAY's
Limited Product Warranty, please see complete details online at:
www.LINSAYdigital.com
Facebook: LINSAY
Loading...