Brand: Linpa World/Sharper Image/Polaroid
Function photo:
Bluetooth speaker specification
Model No: SBT5005
A D E F B C
A： bulb
B： power supply on/off (110V voltage)
C： power plug ( 110V)
D： move previous/long press volume down.
E： long press power-on/short press play/pause.
F： move next/long press volume up.
Function instruction:
1： Connect 110V power supply, open the power button, the light bulb is
bright, an hour later, you can see the lava works and works , the effect will
be much better at night.
2： Blue tooth connect
Open the power button, long press the bluetooth switch“E, blue lights
flash, at this time open the bluetooth in the multimedia equipment, begin
to search (multimedia equipment are different, the method of opening
bluetooth are different.) ,multimedia Bluetooth will search to the "product
name", check the name and establish a connection, if multimedia devices
needs password, please input the four number "0000”. Press “confirm”,
waiting for connection.
From the above picture, we can see:
After the bluetooth connected successfully, the blue lights flash slowly,
multimedia device will display connection status, multimedia devices and
speakers connected successfully at this time.
Remarks: multimedia equipments have the memory function, after the
first connection, the second connection does not need to set up again, the
speakers will connect automatically the devices have been connected
before.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
To comply with FCC RF exposure compliance requirements, this grant is applicable
to only mobile configurations. The antennas used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
Loading...