Linksys WVC54GC Quick Start Manual
1
Set up the Intamac Camera
Monitoring Service for the Camera
For more information about the Intamac Camera
Monitoring Service, go to this address:
http://www.intamac.com/linksys
IMPORTANT: Set up the Wireless-G network camera
A On the Welcome or
Congratulations screen of the
Setup Wizard, click the
Intamac Remote Camera
Monitoring tab.
NOTE: If you need to start up the Setup
Wizard, insert the Setup CD-ROM into
your CD-ROM drive. The Setup Wizard
should run automatically, and the
Welcome screen should appear. If it
does not, click Start and then Run. In
the field provided, enter
D:\wvc54gc.exe (where “D” is the
letter of your CD-ROM drive).
B The About the Intamac service
screen explains the benefits of
using the Linksys Camera(s)
and Intamac Camera
Monitoring Service to monitor
your property. Click Next.
C The 30 Day Free trial offer
screen describes the 30-day
free trial of the Intamac
Camera Monitoring Service.
Click Next.
A
B
E The screen shown in Figure E
displays a list of Wireless-G
Internet Video Cameras on
your network and their status
information. In the Selection
box, click the name of the
Camera you are currently
setting up. Click Next.
F To ensure security, you will be
asked to enter a user name
and password before you can
access the Camera. If you
have not changed the
Camera’s user name and
password, then enter admin in
the User name and Password
fields (admin is the default).
Then click OK.
G Your web browser will
automatically start up, and the
Intamac Camera Monitoring
screen of the Camera’s
web-based utility appears.
Click Set up a new account.
E
F
before you register for Intamac Camera Monitoring.
GHz
4
2
,
802.11g
Wireless-G
Quick Installation
Internet Video Camera
Model No.
Model No.
Model No.
Wireless
WVC54GC-UK
Intamac Quick Installation
Quick Installation
D Make sure your network has an
active Internet connection.
Verify that your PC and
Camera are connected to the
network and the Camera is
configured properly. Click Next.
C
G
D
H If you already have an
Intamac account, click Add
camera to existing account
and follow the online
instructions.
I Complete the entries on the
account details screen. All
fields marked with an asterisk
are required.
NOTE: Your privacy is important to
Intamac, which is registered and
complies with the legislation of the UK
Data Protection Act.
If you agree with the terms and
conditions of your agreement
with Intamac, select I accept.
You can also choose whether
to receive product and service
information from Intamac or
other companies by e-mail.
Then click Continue.
J On the monitored property
screen, confirm that the
address you entered is the
location of the camera to be
monitored. If the new settings
are correct, click Continue.
H
K On the login details screen,
create a memorable Member
ID (user name) and password,
which you will use to log into
your Intamac account. Then
enter a security question and
your answer. The security
question and answer will be
used to remind you of your
password, should you forget it.
Click Continue.
K
L On the registration summary
screen, review the information.
If it is correct, click Complete
Registration. If you need to
make any changes, click Back
and enter your changes.
M On the registration complete
screen, click Update your
camera at the bottom of the
screen to configure the
Camera for your Intamac
account.
L
I
N On the Intamac Camera
Monitoring screen of the
Camera’s web-based utility,
you will now see a 10-digit
number in the Intamac Device
ID field. Select Enabled for the
Monitoring option. Then click
the Apply button.
Congratulations! The Intamac
Monitoring Service has been
successfully set up. You will now be
e-mailed with further information
from Intamac.
If you want to enable your 30-day
free trial, click the Manage your
account button on the Intamac
Monitoring screen. Log in using your
Member ID and password. Then
follow the on-screen instructions.
Support for the Intamac Camera
Monitoring Service, including a
complete set of frequently asked
questions, can be found at
www.intamac.com/linksys.
NOTE: Intamac’s services are entirely
Internet-based. You can access your
secure, online account at any time via the
Intamac website, www.intamac.com.
N
30-day free trial
Login
If the camera will be located
at a different address, select
This is NOT the monitored
property and click Continue.
You will be asked to enter the
details of the monitored
property. Then click Continue.
Model No.
J
M
For additional information or troubleshooting help, visit the Intamac website.
Website http://www.intamac.com/linksys
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other
countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved.
WVC54GC-UK-IntamacQI-60807NC SW
Loading...