LINKSYS WVC2300 User Manual

High quality wireless video surveillance platform provides flexible installation
The WVC2300 Camera can be mounted on any Pan-Tilt (PT) base that supports the Pelco_D protocol and can be remotely rotated and controlled through an RS-485 interface. The WVC2300 also has two input and two output ports which can be used for connecting the camera to an alarm panel, siren, Passive InfraRed (PIR) sensors, smoke detectors, lighting switch (on/off ), door sensors, etc.
The WVC2300 uses a high-quality progressive scan CCD Sensor delivering good quality video. The CCD sensor also has low-light sensitivity so video can be captured even in very low light environments or during “near dark” times of day. Additionally, the camera incorporates an IR Cut Filter which, when used with a separate IR lamp, allows for video capture in total darkness.
The WVC2300 Camera supports dual codecs (MPEG-4 and MJPEG). Both codecs can be used simultaneously. MPEG-4 gives efficient bandwidth consumption with good quality compression and is optimal for real-time viewing of video. MJPEG gives optimal video quality with lossy compression making it ideal for large volume storage to a NAS device.
The WVC2300’s audio capabilities include 2-way audio, embedded microphone, external speaker and microphone ports, and voice compression. With extensive feature support like IP Multicast, RTSP, RTP, and 3GPP, video can be viewed from multiple endpoints and client applications like 3G phones, and Quicktime clients on PCs or WiFi phones. The Wireless capabilities of the WVC2300 includes support for 1x2 MIMO, providing better range than traditional 802.11g, and strong wireless security utilizing WPA. Support for multiple network protocols like 802.1p priority, 802.1q VLANs, and Dynamic DNS, make the solution ideal for multiple IP surveillance applications. The 2300-series cameras can also be managed securely using HTTPS.
WVC2300
Linksys Business Series Surveillance Cameras are also Linksys One Ready. That means they include the necessary firmware to be integrated into a Linksys One data or data/voice network.
Wireless Box camera with interchangeable lenses, and I/O ports allow for flexible installation for multiple applications
High quality CCD sensor with low light sensitivity and an IR Filter switcher provides optimal video image under multiple conditions
Simultaneous dual CODEC provides optimal combination of viewing and storage of video
Two-way audio, IP multicast, 3GPP, and lots of other advanced features make this solution ideal for surveillance deployments
Wireless-G Business Internet Video Camera with Audio
http://www.mercadoactual.es
Model: WVC2300
PRODUCT DATA
BUSINESS SERIES
Features
Standard box-type
• camera allows for flexible installation
Mounts in a standard
• outdoor or indoor enclosure
Provides controls for
• mounting on a Pelco pan/tilt base and control movement remotely
Removable CS-mount lens
- camera can be customized for multiple applications
- zoom lens, wide-angled, vari-focal, auto-iris lenses, etc
1/4’’ Progressive Scan CCD
• sensor delivers good quality video
Low light sensitivity with
• high-quality lens, sensor, and a programmable IR-cut filter functionality
Audio input/output for
• external microphone and/or speaker
IO ports facilitates alarm
• triggers, turn on/off of lights, etc
IEEE 802.11b/g wireless
• support with 1x2 MIMO for better wireless range and coverage
Dual CODEC (MPEG-4
• and MJPEG) supported simultaneously
IP Multicast support
RTSP video/audio streaming
• to unicast and multicast clients
4x Digital zoom – can also
• use optical zoom with appropriate interchangeable lens
PRODUCT DATA
BUSINESS SERIES
http://www.mercadoactual.es
Wireless-G Business Internet Video Camera with Audio
Specifications
Model WVC2300 Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
IEEE802.1p (QoS Priority), IEEE802.1q (VLAN), 802.11e (Wireless QoS) Protocols Supported TCP/IP, HTTP, DHCP, SMTP, FTP, NTP, DNS, UPnP, RTP, RTSP and DDNS Ports Ethernet, Microphone IN, Speaker OUT, Power (12V, 1A), GPIO,
4-Pin IRIS Port Buttons Reset Cabling Type UTP CAT 5 LEDs Power, Network Camera Type Box IO ports RS-485 x 1 (2 Pins) - Supports Pelco “D” Protocol Commands
Input Control x 2 (2 Pins) Output Control x 2 (2 Pins)
Lens
Sensor 1/4” Progressive CCD Sensor Illumination 0.4LUX@F1.7 Lens Type CS-Mount lens, Fixed Focus; Adapter also Included for Lenses that Require
More Distance Between Sensor and Lens Focal Length 500mm~Infinity (for Included Lens) Field of View 60º (for Included Lens) Video Resolution 640x480 (VGA), 320x240 (QVGA), 160x120 (QQVGA) Frame Rate 1 to 30 fps (Selectable) Iris Provides Iris Control for CS-Mount Auto-Iris Lens When Attached
Setup/Config
Web UI Built-in Web UI for Easy Browser-Based Configuration (HTTP)
Management
Web Browser Internet Explorer 5.x or Above Limited support for Netscape and Firefox. Browser controls for PTZ, Audio, and Motion Detection are limited or not supported with Netscape and Firefox. Please consult support.linksys.com for browser compatibility.
Event Logging Event Logging (SYSLOG) Web F/W Upgrade Firmware Upgradable Through Web-Browser
Video Compression
Dual Codec MPEG-4 Simple Profile MJPEG Simultaneous Dual-Stream
Snapshot JPEG Modulation NTSC and PAL Image Settings Brightness and Contrast Zoom 4x Digital Zoom Night Vision IR Cut Filter for Low Light Video Controls Auto-White-Balance(AWB), Auto-Exposure(AES) Image Control Select Video by Quality, Bandwidth, and Frame Rate Format 3GPP for Use with 3G Phones
Alerts
Motion Detection 4 Detection Areas with Individual Sensitivity E-mail Alert 3 E-Mail Addresses FTP Uploading FTP Server Address and Login Settings Instant Messaging Jabber Client Support Scheduled Schedule by Day or Time Triggers Inputs 1, Input 2, Motion Detection Actions Outputs 1, Output 2, Messaging, E-mail, FTP
Audio
Summary 2-Way Audio Built-In Microphone - 6mm, -40db + 3db Microphone Input - 3.5 mm Phone Jack
Loading...
+ 1 hidden pages