Increase the effective range of your wireless devices!
Increase the range of your Wireless network! Attach these high gain antennas to your Linksys Wireless Broadband Router or Access Point, and increase both the effective strength of the outgoing signals, and the receive sensitivity for incoming signals.
The added signal strength and sensitivity also improves close-range communication reliability because every packet comes through "loud and clear", reducing retransmissions due to weak signal reception errors.
To install, just unscrew your current antennas, and attach the High Gain antennas in their place. There are no drivers to install, and no modifications to your setup are necessary.
The Linksys High Gain Antenna Kit saves wiring costs and helps to build corporate wireless infrastructure by driving stronger signals into distant corners and hard-to-reach areas. And it's perfect for covering large areas in warehouse environments, public spaces, wireless hotspots, and outdoor venues -- anywhere you need extra coverage for your wireless network.
Increases the effective range of Linksys wireless devices
Stronger signal increases wireless coverage into hard-to- reach areas and improves throughput by reducing retransmissions
Easy installation -- |
|
Works with both |
|
||
simply replace |
|
Wireless-G and |
your current |
|
Wireless-B devices |
antennas |
|
|
|
|
|
Wireless |
High Gain Antenna Kit Product Data
for R-TNC Connectors
Model No. HGA7T
High Gain Antenna Kit for R-TNC Connectors
Features
•Increase wireless signal of your Linksys Wireless-G or Wireless-B devices
•Omni Directional design for 360 degrees of coverage
•Easy to install, no configuration necessary
•3-Years limited warranty
Specifications |
|
|
|
|
|
Model Number |
HGA7T |
|
Peak Gain |
7 dBi |
|
Frequency Range |
2.4GHz ~ 2.5GHz |
|
Voltage Standing |
|
|
Wave Ratio (VSWR) |
1.92 Max. |
|
Polarization |
Linear Vertical |
|
Direction |
Omni-directional |
|
Impedance |
50 Ohms Nominal |
|
Connector |
Reverse TNC |
|
|
|
|
Environmental |
|
|
|
|
|
Dimensions |
11.22" x 0.55" |
|
W x H x D |
(285 mm x 14 mm ) |
|
Unit Weight |
1.48 oz. (0.04 kg) |
|
Operating Temp. |
-4ºF to 149ºF (-20ºC to 65ºC) |
|
Storage Temp. |
-22ºF to 167ºF (-30ºC to 75ºC) |
|
Operating Humidity |
0% to 85% Non-Condensing |
Linksys
A Division of Cisco Systems, Inc.
18582 Teller Avenue
Irvine, CA 92612 USA
E-mail: sales@linksys.com support@linksys.com
Web: http://www.linksys.com
Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com.
Works With:
•WRT54GS
•WRT54G
•WAP54G
•BEFW11S4
•WAP11
•AS2TNC (Antenna Stand)
Package Contents
•Two High Gain Antenna for R-TNC Connectors
•One Antenna Stabilizer
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
HGA7T-DS-50302
Product Data
Model No. HGA7T