LAN 設定 ...................................................................................................................................................................................... 14
Front ............................................................................................................................................................................................... 4
What do the lights on the 5G Mobile Hotspot tell me? .............................................................................................. 5
Where to find more help ........................................................................................................................................................ 8
5G Mobile Hotspot Setup Guide .......................................................................................................................................... 8
Power button ............................................................................................................................................................................................ 9
Features ........................................................................................................................ 10
LAN Settings .............................................................................................................................................................................. 13
5G Mobile Hotspot .................................................................................................................................................................. 18
• Do not use your 5G Mobile Hotspot while driving.
• Do not leave your 5G Mobile Hotspot in direct sunlight or other places where the
temperature is high (near a heater or stove, or in a hot car).
• Do not take apart or otherwise try to modify your 5G Mobile Hotspot. Use a designated
service center for repairs.
• Use the provided charger. Using third-party charging cables could result in fire or electric
shock and might shorten the useful life of your 5G Mobile Hotspot.
3
Page 22
Overview
Front
4. Power/Battery LED
5. Network Signal LED
6. WiFi/WPS LED
4
Page 23
What do the lights on the 5G Mobile Hotspot tell me?
Battery Remaining
(When the USB cable is not
connected)
Solid white
100% - 50%
Solid orange
49% - 16%
Blinking orange
15% - 1%
Battery Charging
(When the USB cable is
connected)
Solid white
100%
Solid orange
99~50%
Blinking orange
49~1%
Sequentially blue alternating
with green (bottom to top)
Searching for LTE / 5G signal. If
this takes longer than 10 minutes,
move to another area and try
again.
Solid blue
5G connected; number of lights
indicate signal strength
Solid green
LTE connected; number of lights
indicates signal strength
Third light blinking blue,
bottom light blinking green
No SIM card / SIM card error
Top light blinking blue, bottom
light blinking green
Failed connection or failed
number registration
5
Page 24
First light solid blue
Connected to 5G
First light solid blue
Connected to LTE
WiFi
Off
WiFi turned off in WebUI settings
or Sleep Mode
Solid white
WiFi working
Blinking orange
WiFi signal failure
WPS
Blinking white
WPS pairing in progress
Slowly blinking orange
WPS pairing failed
6
Page 25
Buttons
Power
•
WPS
•
SIM Card Tray
SIM Tray
7
Page 26
Setting Up: Basics
Where to find more help
In addition to this user guide, you can get help in the Linksys app or by calling Linksys .
—Licenses and notices for third party software used in this product may be viewed on
Note
http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-us/gplcodecenter
for questions or GPL source code requests.
5G Mobile Hotspot Setup Guide
Be sure you have a 5G SIM card before setting up your 5G Mobile Hotspot
1. Insert your 5G SIM card in the slot on the right side of your 5G Mobile Hotspot. Poke the hole to
release the SIM card tray.
2. Press and hold the power button on the left side of your 5G Mobile Hotspot for more than 2 seconds
to turn it on.
3. Wait while the 5G Mobile Hotspot turns on and finds the 5G network. When the WiFi light is solid
white you should be able to connect to WiFi. This takes about 2 minutes.
4. In your device’s WiFi settings, connect to one of the default WiFi names. The names are on the
sticker on your setup guide that came with your 5G Mobile Hotspot.
5. Enter http://myhotspot.linksys.com or http://192.168.1.1 in a browser to visit the 5G Mobile Hotspot’s
settings screens. This is how you will log in each time you want view or change settings.
6. Enter the default password on the [box / insert / sticker on this guide] to log in.
7. Use the settings screens to customize your login password and WiFi names and passwords.
8. Recommend writing down the login password after it’s changed.
For best results, make sure you have a good cellular signal when setting up your 5G Mobile Hotspot.
8
Page 27
WPS Pairing
Turn On
Press and hold for more than 2
seconds
The battery, network signal
and WiFi LEDs will blink
white/blue/white during
booting
Turn Off
Press and hold for more than 2
seconds, but less than 6 seconds
The battery and WiFi LEDs
will blink white until power is
off
Restart
Press and hold for more than 8
seconds
The 5G Mobile Hotspot will
turn off and back on
automatically while you hold
the button.
Factory Reset
Press and hold the power button
and the WPS button at the same
time for more than 2 seconds
The power LED and WiFi LED
will blink orange
To pair devices with your 5G Mobile Hotspot, press and hold the WPS button for more than 2 seconds.
Power button
9
Page 28
Features
You can view or change your 5G Mobile Hotspot settings in a web browser on a phone, tablet or computer. All
features are available regardless of the device used, but screens might look a little different because of their
size and format. All screens in this user guide are from a phone browser.
Navigation
Tap the menu iconto navigate around the app.
10
Page 29
Dashboard
Dashboard is a snapshot of your 5G Mobile Hotspot. Follow your data usage, see whether your 5G Mobile
Hotspot is online and how many devices are connected to it. You also can copy your WiFi name and
password to share with others over email or text message.
Note: Data usage numbers are approximate. Check with your carrier for actual usage.
11
Page 30
Network Settings
WiFi Settings
View or change your Wi-Fi name and password, secruity type, channel width and WiFi channel. Use Wi-Fi
Protected Setup to connect devices to your 5G Mobile Hotspot without having to enter the WiFi name and
password.
12
Page 31
LAN Settings
View or change your 5G Mobile Hotspot’s local area network settings. Turn on/off DHCP server, set a DHCP
range or change the client lease time.
13
Page 32
Connected Devices
See all devices connected to your 5G Mobile Hotspot.
14
Page 33
Device Management
Turn on USB Tethering to allow devices to connect to your 5G Mobile Hotspot directly with a USB cable.
Sleep Mode allows you to set a timer that will shut down your 5G Mobile Hotspot if there is no WiFi activity for
the designated amount of time. Press the power button for 2 seconds or less to activate WiFi in sleep mode.
You can also change your login password here. A factory reset will erase all customized settings.
15
Page 34
SIM Security
When you turn on SIM Security, you must enter a PIN to unlock your SIM card each time you use the 5G
Mobile Hotspot. You get three chances to enter a correct PIN. If you enter an incorrect PIN three times, you
will need your personal unblocking key (PUK) to unlock the SIM card.
16
Page 35
About
View all the device-specific data about your hotpsot, inlcuding whether your firmware is up to date.
Linksys Customer Support 800901205
www.linksys.com /support/
5G Mobile Hotspot
Environmental
Specifications are subject to change without notice.
BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies.
Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third
18
Page 37
party software used in this product may be viewed here: http://support.linksys.com/en-us/license. Please
contact http://support.linksys.com/en-us/gplcodecenter for questions or GPL source code requests.