LINKSYS 08011 User Manual
Business Unit:
Program Manager:
Packaging Engineer:
Material:
Blank Size (in):
Side Shown:
L x W x D (mm):
0
Unit:
Flute/Grain:
REV
Final
PRINT SIDE
L x W x D (in):
VELOP US QIG - 400gsm C2S + 400gsm C2S
FRONT BACK
IN/MM
Drawing Scale 1:1
Retail Outside Dimension (Including Hang Tab)
DIE/MATERIAL SPECS:
112.003 x 235.999
4.410 x 9.291
Die Line File:
NET-Networking
Brian Byrd
Please refer to drawing
FDL_MSKU_VELOP_US_QIG
Artwork File:
horizontal
00
RELEASE DATE:
09/21/2017
Tolerance:+/- 1/32" - 0.8mm
Blank Size (mm):
DIELINE:
This dieline works for following skus (if any):
Die Line File:
REV
FDL_MSKU_VELOP_US_QIG
DIE LAYOUT
Artwork File:
QSG_WHW301_WHW302_WHW303_8820-02483_RevC01_Velop
VELOP US QIG - 400gsm C2S + 400gsm C2S
Business Unit:
NET-Networking
Program Manager:
Packaging Engineer:
Retail Outside Dimension (Including Hang Tab)
L x W x D (in):
L x W x D (mm):
Brian Byrd
DIE/MATERIAL SPECS:
0
00
FRONT BACK
SETUP GUIDE
Download the Linksys app to
get started. Yes, it’s that easy.
SETUP GUIDE
Download the Linksys app to get
started. It’s required for setup.
Material:
Blank Size (in):
Blank Size (mm):
Please refer to drawing
4.410 x 9.291
112.003 x 235.999
This dieline works for following skus (if any):
9
/
9
32
[235.999]
1
2
3
www.Linksys.com/app
Linksys
Linksys
Unit:
Side Shown:
Flute/Grain:
IN/MM
PRINT SIDE
horizontal
Tolerance:+/- 1/32" - 0.8mm
Drawing Scale 1:1
RELEASE DATE:
09/21/2017
DIELINE:
Final
13
4
/
32
[112.003]
PR#
FILE NAME
SKU#
P#
DESIGNER
DAT E
ICG PRODUCTION
54938
QSG_WHW301_WHW302_WHW303_8820-02483_RevC01_Velop
WHW0301/WHW0302/WHW0303
8820-02483 REVISION C01
Shiho
October 27, 2017 3:49 PM VERSION 01
Follow the app instructions
to complete setup.
Set Up a Device
Log in
8820-02483 Rev. C
THIS DOCUMENT & THE INFORMATION
IN IT ARE THE CONFIDENTIAL PROPERTY
PRINT SPECS:
Color Plates:
CYM
K
PMS
3005
PMS
295
Finish:
OVERALL PP COAT
OF BELKIN INTERNATIONAL AND MUST
NOT BE COPIED, REPRODUCED OR USED
IN ANY MANNER WITHOUT THE WRITTEN
CONSENT OF BELKIN CORPORATION.
IT MUST BE RETURNED UPON REQUEST
Notes:
DO NOT PRINT
ALL TEXT AND GRAPHIC ELEMENTS COLOR: CMYK, PMS C, PMS
DIE LINES, PRINTERS NOTES
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 32cm between the radiator & your body.
Loading...