Measy 1080P HD Wire Miracast Adapter
《 User Manual 》
Model: LM-W2HS-30
一、Description：
W2H Mini Wireless HDMI Transmitter/ Receiver from Measy, applies wireless HD technology,
working in the uncompressed 60 GHz frequency band, which supports the highest resolution up
to 1080p@60Hz at wireless transmitting distance of up to 30m and can get connected easily and
signal transmitted in high resolution and stable status. W2H Mini wireless transmitter and
receiver is inevitable choice for office environment and wireless transmission system of home
audio &video
二、Product strength：
1. One-key to match, there is no need to do some settings. Devices which already did matching
don’t need to match next time. With power on, you can use it directly (the are all matched
when leave factory)
2. 1080P@60HZ no compression and no delay transmission, which is suit for all kinds of game,
such as Need for Speed.
3. The longest straight line wireless transmission could be up 30 meter.
三、How to connect：
W2H Mini plus could not be allowed used through wall, the transmitter and receiver should
better be placed face to face, to avoid the barrier in the middle of them。
1. Connect TX device with DVD device：connect TX and DVD device with HDMI cable，power on
with a Micro USB（USB power adapter or TV USB port ），The TX device led will be flashing
slowly with power on.
2. Connect the RX with TV：Connect RX and TV with HDMI cable, Power on the RX with USB
cable（USB power adapter or TV USB port），RX device led will be flashing slowing with power
on。
3. When the TX device RX device connected，the led on each device will be fast flashing instead
of slowly flashing. The TV screen can be showing the content of the DVD when the led be
flashing all the time.
四、Indicator light
Slowly flashing：（time interval is about １second）It means searching the match device.
Fast flashing：matched already
Keep lighting：It is mean the input and output audio and video signal transmission
七、Matching buttons
Device have been already matched when leave factory, no need match next time. But when you
using them, the TV no showing after connected, then we should match them again. Below is the
method:
1. Connected TX box and RX box，if can not display，one box led is slow flash, another box is
fast flashing. Please keep pressing the Pair key of led slow flashing box for 4 second, after a
while the box led will be fast flashing, and after another 3 second the led of both boxes will be
light state, it is mean matched well.
2. Connected TX box and RX box，if can not display，both box led are slow flash,Please press
one box pair key for 4 second, after a while, the box led will be fast flash, do the same thing to
the another box, and after 3 second the both box led will be flashing state, it means matched
well.
3. Keys introductions as below：
A. Short pressing 4s：searching the match device
B. Long pressing 10s：device restoration，if the 2 box can not be used normally with above
ways, then we should do device restoration first and do match later.
四、Accessories：
TX box x1
RX box x1
Power adapterx2
USB power cablex2
User manualx1
三、Specification:
Technical standard
WirelessHD1.1
Bandwidth
7Gbps
intermediate frequency
60GHz（59~66GHz）
Radio-frequency power
10dBm
Security agreement
HDCP
delay time
<5ms
Transmission distance
30m（can not through body or wall）
resolution
Max 1080P @60Hz
port
HDMI A 型
Average power consumption
Transmit max 2.5w， Receiver max 2.5w
Power supply
Micro USB B, 5V 1A
Operating temperature
0 -~45°C
Loading...