HDMI UTP Extender
LM-HE60-POE
USER MANUAL
1. Description
LINK-MI LM-HE60-POE The HDMI extender provides extension of HDMI signals long distances over a single
CAT6 cable, it supports high resolution up to 1080p, EDID copy function. The extender can use for a wide range of
applications requiring long distance transmission of high resolution with high quality by its good stability and
powerful security.
2. Features
1. Transmits HDMI video and audio signals up to 60m over a single CAT6 cable
2. Support video resolution up to 1920*1080@60Hz, 3D signal
3. Support copy EDID, can match many kinds of display device
4. Compliance with HDMI 1.3 and HDCP 1.2 standard
5. Support POC unilateral power supply
6. High compatibility, can auto-match source and display device
7. Built-in automatic adjustment system, make the image smooth, clear and stable
8. Built-in ESD protection system
9. Simple to install, plug and play
3. Specifications
Parameter
Description
Video
Standards
HDMI 1.3; HDCP 1.2
Maximum pixel clock
165MHz
Maximum data rate
6.75Gbps
Resolution
1920X1080@60Hz, 3D
Connector
HDMI-A
Impedance
100Ω
Ethernet
Interface
RJ45
Transmission distance
CAT6---60m
Other
Power supply
The power adapter: DC 5V
Power dissipation
MAX 3W
Temperature
Operating: -5℃ ~ +70℃
Humidity
Operating: 5% ~ 90%
Dimension
81*43*23mm
The warranty
1 year free warranty
4. Panel
Transmitter:
Receiver:
Port name
Description
HDMI IN/HDMI OUT
HDMI signal input/output
Cat6
RJ45 port;
30M/60M
Press is 1-30M mode；Bounce is 15-60M mode
EDID
EDID Copy button, Press 3 seconds, copy EDID from HDMI IN
display device to system .If HDMI IN interface no display
connect, restore default EDID.
DC 5V
Power adapter socket
LED indicator
Description
PWR
System power indicator
STA
HDMI signal indicator
5. Package list
l HDMI transmitter ……………………….…. 1 pcs
l HDMI receiver ……………………………….. 1 pcs
l Power adapter ……………………………….. 1 pcs
l User manual …………………………………… 1 pcs
6. Installation
1、 Connect an HDMI cable between the HDMI input port of transmitter and the HDMI output port of the video
source,
2、 Connect the HDMI output port of receiver to the display device with HDMI cable,
3、 Connect the transmitter UTP port to the receiver UTP port using a single CAT6 cable.
4、 Connect the provided DC 5V power supplies to the power socket of the transmitter or the receiver,
5、 for the first time on is the need to confirm the working mode of EQ buttons, 1-30 meters of cable, please
press the button, 15-60 meters cable pop-up buttons, please
6、 EDID buttons purposes, such as connection after launch the PWR, STA indicator light, long PWR at the
receiving end, the STA indicator light, long display no image or color, the transmitter power on the monitor of
the HDMI port and transmitter HDMI port connection, long press EDID until the STA lights flashing, flashing
stop and restart the power, 1-5 steps can be repeated
7. Diagram
Loading...