Link Interactive CT-100 Getting Started

CT-100

Thermostat

Enroll

STEP 1

Remove exisng thermostat and install CT-100 as per
instrucons included in the box. Once installaon is
completed, test thermostat to make sure it is working
properly with your heang/cooling system (fig 1-2). Make
sure the Z-Wave device is plugged in within 6 feet of the
panel or the panel is moved close to the device just for the
enrollment process.

Need help? Give us a call.

1-877-826-5443

STEP 2

From panel, select

4-digit master code

STEP 3

At the thermostat follow this sequence:

Press › Tap on LCD Screen › wait for the
words LINK and R1 to appear › Tap again (fig 3).

STEP 4

At the Go!Control panel, check to see that the thermostat
has been added to your system.

STEP 5

Log in to your Alarm.com account from your computer. Go
to the “empower tab” and set up schedules for your newly
automated thermostat.

MENU MATE

Note: If the device is not being picked up, then it needs to be
removed from another network. Click Back › Remove Device ›
follow step 3 › check to see if the device has been removed
then go Back and select Add Device › follow step 3. If the
device sll isn’t recognized, click Back and select Add Device
to try again.

SERVICES

›

›

› select

Z-WAVE

ADD DEVICE

› enter

.

MATE

fig 1

fig 2

fig 3

Note: Please allow up to 15 minutes for your Thermostat to
show on your online account.

www.linkinteracve.com