LINK ELECTRONICS, INC.
ANALOG AUDIO DISTRIBUTION AMPLIFIER
DigiFlex 1650
1000 SERIES DIGIFLEX
MADE IN THE USA
FEATURES
Low Noise
Eight Mono Outputs or
Four Stereo Outputs
Signal Presence LED
LINK's DigiFlex 1650/1651 Stereo Audio
Distribution Amplifier takes advantage of the latest
in Operational Amplifier technology. The front end
is high-impedance, balanced, with high commonmode rejection. The output amplifier is capable of
driving low impedance (150Ω) loads and is
compensated for load capacitance of up to
10,000pF. Its wide bandwidth (>120KHz) will allow
for the distribution of SMPTE Time Code or BTSC
Baseband Stereo.
Ultra low-noise components (including metal-o xide
resistors) are used throughout the audio signal
path. Both the input buffer and output driver offer
noise figures of <7nV/Hz
1/2
. In addition, extreme
care has been taken in the printed circuit board
design to reduce noise and improve channel
isolation. The 1650 and 1651 are identical with one
exception: the 1651 has logarithmic bar graph
level meters for the left and right channel signal
indication.
1000 - Single Power Supply, Holds 11 Modules
Mounting Frame Options
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
FEATURES
11 Modules per Frame
>100dB S/N Ratio
A/B Buss Monitoring
The LINK 1650/1651 has a unique signal presence
indicator on the rear panel. The rear panel module
with build-out resistors and fixed terminal blocks is
the model 1014. Plug-in terminal blocks are
available on the 1021 Rear Cell. The front panel
features a DC power supply monitor LED.
The LINK 1650/1651 is designed to reside in
LINK's DigiFlex 1000 frame. This rugged 2RU
frame can house up to 11 modules. An audio buss
runs the full length of the frame to allow monitoring
of any of the resident audio distribution amplifiers
by a single monitoring amplifier, model 1626. A
switch on the front of the module places the audio
signal on the frame buss. The versatile DigiFlex
1000 frame can also accommodate AES/EBU
Digital Audio distribution (using the DigiFlex 1652)
as well as Analog and Digital Video distribution.
Backed by LINK's 10-year warranty, the 1650/651
will provide years of outstanding performance.
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255
DIGIFLEX 1650 AUDIO DISTRIBUTION AMP
SPECIFICATIONS
INPUT:
Impedance: ................................................... 20K Ohm, ±2% Balanced
Max. Level:......................................................... 20 dBu, Differential
Common Mode Range: .......................................................±10 Volts
Common Mode Rejection: ............................................... >85 dB @ 60Hz
OUTPUT:
Channels: ........................................................................ 2
Number of Outputs per Channel: ...................................................... 4
Impedance: ................................................................ 66 Ohms
Max. Level:..................................................................+18 dBu
..................................................................Load = 4 X 150Ω
PERFORMANCE:
Gain Range: .............................................................. -inf to +8dB
S/N Ratio:................................................. >100dB A WTD +8dBu 0 Gain
Frequency Response: ........................................... +/-0.2dB, 20Hz to 20KHz
Total Harmonic Distortion: ...........................................<0.01% +8dBu 0 Gain
Load = 4 X 150Ω
Crosstalk:........................................................ 90dB, 20Hz to 20KHz
DC Offset: ...................................................................<10mV
Quiescent Drain Current: .......................................................±100mA
Monitor Switch: ............................................. Places signal on Frame Buss
Level Indication:.................................................. Bar Graph (1651 only)
Temperature Range: ........................................................0° to 50° C
INTERNAL ADJUSTMENTS
Audio Level: ............................................................ Resistive Trim
Common Mode Adjustment: ............................................... Resistive Trim
MECHANICAL:
Height: ........................................................................ 3.2"
Width:......................................................................... 1.0"
Length: ....................................................................... 10.0"
Weight:....................................................................... 8.0oz
LINK ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703
Phone: 573 334 4433
FAX: 573 334 9255
PROFESSIONAL SERIES-modular system products--by
1650/111302
LINK
1014 REARCELL 1021 REARCELL
Loading...