Link electronic DigiFlex 1152 User Manual

1000 SERIES DIGIFLEX
ANALOG VIDEO DISTRIBUTION AMPLIFIER 1 X 8
DigiFlex 1152
MADE IN THE USA
FEATURES
Eight Outputs Differential Input DC or AC Coupled Op Amp. Technology ±3dB Gain, each set of four 100 MHZ Bandwidth Diff. Gain and Phase 0.1
The DigiFlex 1152 Video DA represents the state of the art in analog video distribution. The 1152 provides high-performance video distribution in the LINK DigiFlex 1000 Frame. The advantage is obvious: both analog and digital distribution amplifiers can operate side-by-side in a single frame!
Utilizing the latest CMF Op-Amp technology, the 1152 combines wide bandwidth, low noise, and low power consumption. The video path is truly transparent, with differential phase and gain errors of <0.1° noise ratio exceeds 65dB.
and <0.1%, respectively. Video signal-to-
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules 1000/2 - Dual Power Supply, Holds 10 Modules 7200 - Mounting Frame, Holds 1 Module
DC-coupled differential input is a standard feature, providing high common-mode rejection. Eight outputs are available on the companion rear cell, model 1011. The front panel gain control adjusts the level to ±3dB.
The attention to detail in the design of the 1152 extends to the power supply, which features a simple switching regulator. While slightly more complex than a linear supply, this offers the highest possible efficiency. Backed by a ten-year warranty including parts and labor. The 1152 will provide years of trouble-free service.
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255
DIGIFLEX 1152 DIGITAL VIDEO DA
SPECIFICATIONS
INPUTS:
Number:............................................................. One, terminated
Level: .................................................................. 1 Vp-p ±3dB
Impedance: .......................................................... 75Ω Terminated
Common Mode Range: ..........................................................5 Vpp
Maximum DC In: ............................................................. ±5Volts
CMRR:............................................................... >70dB @ 60Hz
Return Loss:........................................................ >40dB @ 3.58MHz
OUTPUTS:
Number:...................................................................... Eight
Impedance: .................................................................... 75
Level: ............................................................... Unity Gain ±3dB
Connectors: ................................................................... BNC
AMPLIFIER PERFORMANCE:
Frequency Response: ................................................. ±0.5dB to 40MHz
...................................................................±1dB @ 60MHz
................................................................. -2.0 dB @ 80MHz
.................................................................. -3dB @ 100MHz
Differential Gain: .............................................................. <0.1%
Differential Phase: .............................................................. <0.1°
DC Gain Stability: .............................................................. >50dB
Noise:....................................................................... >65dB
Hum: ....................................................................... >70dB
Output Isolation:.....................................................>40dB @ 3.58MHz
Return Loss:.......................................................... >40dB @ 6MHz
Line RateTilt: ................................................................. <0.2%
Field Rate Tilt: ................................................................ <0.2%
Ringing: ..................................................................... <0.4%
High Frequency Overshoot: ...................................................... <0.4%
Coupling: ..............................................DC Servo, Average DC Output = 0
Propagation Delay: ............................................................. 14nS
ADJUSTMENTS (Front edge of module):
Video Gain: ................................................................... ±3dB
ENVIRONMENTAL:
Temperature: ....................................................... 0° to 50°C Ambient
Humidity: .................................................. 10% to 90% non-condensing
Power: ..................................................................... 500mW
MECHANICAL:
Height: .....................................................3.2 Inch
Width:......................................................1.0 Inch
Length ..................................................... 10 Inch
Weight:......................................................7.1 Oz
LINK ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703
Phone: 573 334 4433
FAX: 573 334 9255
PROFESSIONAL SERIES-­modular system products--by LINK
1152/042503
Rear Cell I/O
0. Input
1. Out
2. Out
3. Out
4. Out
5. Out
6. Out
7. Out
8. Out
1011 REARCELL
Loading...