Lingyi Innovation Tech AE1001 User Manual

Model :ATR1003

Air Tray User Manual

Contents

Introduction
Key Features
Package Contains
Compatible Devices
Quick Guide
LED Lighting Indicator
Clean Tips
Specs
Warranty
Exclusion & Limitation
Important
Customer Service

Thank you for choosing Air Tray, this is a wireless
charging device with high quality and elegant design.
Besides, it can be used as a practical storage box to

1

organize all your daily carrying necessities easily.

1

2

2

Key Features

3

7

9

10

1 1

12

13
14

Universal Compatibility: Compatible with all

Qi-enabled devices.

Practical Catchall Storage: Organize all your everyday

carry essentials without any hassles.

Safe and reliable. The Air Tray is designed to provide

overvoltage protection, under-voltage protection,

over-temperature protection, overcurrent protection,

short-circuit protection and FOD.

Optimized Fast Wireless Charging. Supports both 10W

fast charging for Samsung phones and 7.5 W fast

charging for iPhone.

1 2 3 4 5 6 7

Package ContainsIntroduction Quick Guide

1, PITAKA Air Tray *1

2, Charging Cable *1

3, Charger *1

4, User Manual*1

5, Reusable Dust-Free Cloth * 1

② ③ ④ ⑤

①

Air Tray User Manual

Reusable Dust-Free Cloth

Part I: Charging Your Phone on the Air Tray

Plug the charger into the port of power socket.

Please kindly note that the charger must be QC or PD

＊

certified. It is recommended to use the charger contained in

the package or use an charger that supports the QC or PD

with output that’s over 18W.

Compatible Devices

iPhone 8/8 Plus/X/Xs/XR/Xs Max

Samsung S7 edge /S8 /Note8 /S9 /Note9 /S10 /S10+ /S10e

AirPods II

The other Qi-enabled devices.

Connect the charging cable to the charger, and then

connect the charging cable to the Air Tray.

Place your device on left side of the Air Tray, then

wireless charging will start on contact.

Part II: Store Your Essentials on the Air Tray

This device can also be used as a catchall storage.

Place your belongings like keys, wallet, etc., on the

Air Tray.

LED Lighting Indicator

LED 2

LED 1

When the Air Tray connected with power supply, the

LED1 and LED2 will be alternately flashed red and

white about 2 seconds, then the red turns off and the
white one turns on.

When the phone is wirelessly charged by Air Tray, the

LED2 indicator flashes as white. After it's fully charged

both indicators will be always on.

When the Air Tray is improperly used and detected

FOD, the red indicator will be always on. When it's

detected over-voltage or under-voltage, the LED1 will

flash red once every second; when over-current and

short-circuit, the LED1 will flash red once every 2

seconds; when overheat protection, the LED1 will flash

red once every 0.5 second.

Clean Tips

Use the reusable dust-free cloth to remove the oil,

fingerprints, smudges and dirt with just a swipe.

8 9 10 11 12 13 14 15

Specs

Items Specification

Width 171.70mm

Length 238.00mm

Thickness 12.60mm

Type-C Input 5V 2A, 9V 2A

Type-C Output 5W / 7.5W / 10W

Transmission Distance ≤8mm

Transfer Efficiency Output up to ≤75%

Operating Temperature -10℃~30℃

Storage Temperature -20℃~60℃

Operating Frequency

110.1KHZ-205KHZ

Warranty

The PITAKA Air Tray is warranted for 12 months from

the date of purchase.

The Air Tray is warranted to be free defects in

materials and function under regular use. A defect is

defined as an imperfection or flaw that is produced by

a manufacturing error, including malfunction of

wireless charging or surface defect, etc. This warranty

is non-transferable and covers only the original

end-user/purchaser. PITAKA will only authorize the

warranty claim if the product was purchased from the

official store or authorized dealer.

MODIFICATION: Any change or modification of this

device will void the warranty.

Exclusion & Limitations

Except for the limited warranty expressly set forth or to

the extent restricted or prohibited applicable law,

PITAKA expressly disclaims to any other warranties

express or implied, including any warranty of quality,

merchantability, or fitness for a particular purpose, and

especially you agree that PITAKA shall not be liable for

any special incidental, indirect, punitive, or

consequential damages of any type on any PITAKA

product. In addition to and without limiting the

generality of the foregoing disclaimers, the limited

warranty does not, under any circumstances, cover the

replacement or cost of any electronic device of personal

property inside or outside of the PITAKA product.

Important

1. Please use the AC adapter included in the package to

charge. If you are using a third-party adapter, please

check and confirm whether the output is within the

applicable range.

2. Do not keep the Air Tray in a high temperature

environment, including heat caused by intense sunlight

or other forms of heat. Do not place it in fire or other

excessively hot environments.

3. Do not keep and use the Air Tray in a humid

environment.

4. Do not disassemble the Air Tray or attempt to modify

it in any way.

5. Do not attempt to power the Air Tray with any

connection other than a type C connector.

6. Do not attempt to replace any part of the Air Tray.

7. All parts have gone through a thorough quality

assurance inspection. If you find that your Air Tray is

excessively hot, is emitting odor, is deformed, abraded,

or is experiencing or demonstrating an abnormal

phenomenon, immediately stop all product use and

contact manufacturer.

8. If the Air Tray is intended by the purchaser to be used

by a minor, purchasing adult agrees to provide detailed

instructions and warnings to any minor prior to use,

who agrees to indemnify manufacturer for any

unintended use/misuse by a minor.

Customer Service

Phone：[phone]

E-mail: [e-mail]

Website: www.ipitaka.com

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Any changes or modifications not expressly approved

by the party responsible for compliance could void the

user's authority to operate the equipment.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and

receiver.

-- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV

technician for help.

To comply with FCC’s RF Exposure guidelines, this

equipment should be installed and operated with a

minimum distance between 20cm the radiator your

body: Use only the supplied antenna.

FCC ID: 2ARI5-AE1001