Low Voltage Hot Swap Controllers
LTC4232: 5A Integrated Hot Swap™ Controller
n
Small Footprint
n
33mΩ MOSFET with R
n
Wide Operating Voltage Range: 2.9V to 15V
n
Adjustable, 10% Accurate (5A) Current Limit
n
Current and Temperature Monitor Outputs
n
Overtemperature Protection
n
Adjustable Current Limit Timer Before Fault
n
Power Good and Fault Outputs
n
Adjustable Inrush Current Control
n
2% Accurate UV and OV Protection
SENSE
V
2.9V to 15V
ADC
V
OUT
5A
IN
Power Good
Current Monitor
Adjustable
Current Limit Timer
LTC4210: Hot Swap Controller in 6-Lead SOT-23 Package
n
Adjustable Analog Current Limit with Circuit Breaker
n
Fast Response Limits Peak Fault Current
n
Adjustable Supply Voltage Power-Up Rate
n
High Side Drive for External N-Channel MOSFET
n
Controls Supply Voltages from 2.7V to 16.5V
n
Undervoltage Lockout
n
Adjustable Overvoltage Protection Using Timer Pin
n
LTC4210-1: Automatic Retry After Fault
n
LTC4210-2: Latchoff After Fault
n
Low Profile (1mm) SOT-23 (ThinSOT™) Package
V
2.7V to 16.5V
IN
Adjustable
Timer
LTC4280/LTC4215: Hot Swap Controllers with I2C Interface and ADC
n
8-Bit ADC Monitors Current and Voltage
n
I2C/SMBus Interface
n
Wide Operating Voltage Range: 2.9V to 15V
n
Inrush Current Limit with Foldback
n
LTC4280 Has Adjustable Overcurrent Filter Time
n
LTC4215 Has Fixed Overcurrent (20µs/420µs),
Optional Soft-Start for Inrush Current (Controlled dI/dt)
n
High Side Drive for External N-Channel MOSFET
n
No External Gate Capacitor Required
n
Input Overvoltage/Undervoltage Protection
n
Optional Latchoff or Auto-Retry After Faults
n
Alerts Host After Faults
V
2.9V to 15V
I2C
IN
8-BIT
ADC
Current Limit Adjustment
and Temperature Monitor
V
OUT
V
OUT
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered
trademarks and Hot Swap and ThinSOT are trademarks of Linear Technology
Corporation. All other trademarks are the property of their respective owners.
LTC4224: Compact Dual Low Voltage Hot Swap Controller
AUXON
12ON
AUXPGOOD
12PGOOD
FAULT
n
Controls Load Voltages from 1V to 6V
n
No Gate Components Required
n
Adjustable Current Limit with Circuit Breaker
n
Limits Peak Fault Current in ≤1μs
n
No External Timing Capacitor Required
n
Adjustable Supply Voltage Power-Up Rate
n
Gate Drive for External N-Channel MOSFET
n
LTC4224-1: Latchoff After Fault
n
LTC4224-2: Automatic Retry After Fault
V
IN1
V
IN2
LTC4223: Dual Supply Hot Swap Controller for AMC and MicroTCA
n
Controls 12V and 3.3V Auxiliary Supplies
n
Integrated 0.3Ω Auxiliary Switch
n
Fast Response Limits Peak Fault Current
n
Adjustable Current Limit Circuit Breaker
for 12V Supply
n
Analog Current Limiting
for 3.3V Auxiliary Supply
n
Adjustable 12V Power-Up Rate with
External Capacitor
n
High Side Current Sense Monitor
for 12V Output
n
Thermal Shutdown Protection
n
LTC4223-1: Latchoff After Fault
n
LTC4223-2: Automatic Retry After Fault
n
MicroTCA and AdvancedMC
Applications
12V
3.3V
DUAL
Connector Plug-In Card
12V
7.4A
3.3V
150mA
V
V
OUT1
OUT2
GND
Low Voltage Hot Swap Controller Selection Guide
Part
Number
LTC4210 1 2.7V to 16.5V • Adjustable Overvoltage Protection SOT-23
LTC4211 1 2.5V to 16.5V • Reset Output SO-8, MSOP-8, MSOP-10
LTC4215 1 2.9V to 15V • • • • • 8-Bit
LTC4280 1 2.9V to 15V • • • • 8-Bit Adj. Overcurrent Filter Time 4mm × 5mm QFN-24
LTC4218/
LTC4218-12
LTC4217/
LTC4217-12
LTC4219-5/
LTC4219-12
LTC4232 1 2.9V to 15V • • • • 5A
LTC4221 2 1V to 13.5V • • • • Supply Sequencing Narrow SSOP-16
LTC4222 2 2.9V to 29V • • • • • 10-Bit
LTC4223 2
LTC4224 2 1V to 6V • • Small Solution Size 3mm × 2mm DFN-10, MSOP-10
www.linear.com/LVHotSwap n 1-800-4-LINEAR
# of
Channels VIN Range
2.9V to 26.5V
1
12V Preset
2.9V to 26.5V
1
12V Preset
1 5V/12V Preset • • • • 5A
12V and 3.3V
Auxiliary
Active
Fold-
Soft-
Limiting
back
• • • •
• • • • 2A
• • •
Start
Power
Good Fault
I2C
ADC
Internal
MOSFET Extra Features Packages
Fixed Overcurrent Filter Time GPIO,
Up to 27 I2C Addresses
Current and Temperature
Monitor Outputs
Current and Temperature
Monitor Outputs
Current and Temperature
Monitor Outputs
Current and Temperature
Monitor Output
Dual Version of LTC4215 with
10-Bit ADC and Wide Input Range
MicroTCA Compliant Current
Monitor Output
4mm × 5mm QFN-24,
SSOP-16
5mm × 3mm DFN-16,
SSOP-16
5mm × 3mm DFN-16,
TSSOP-20
5mm × 3mm DFN-16
5mm × 3mm DFN-16
5mm × 5mm QFN-32,
SSOP-36
5mm × 4mm DFN-16,
SSOP-16
0212A