W
s
查询J501供应商
J500 SERIES
CURRENT REGULATING
Linear Integrated Systems
DIODES
FEATURES
SECOND SOURCE FOR SILICONIX J500 SERIES
WIDE CURRENT RANGE 0.192 to 5.6mA
BIASING NOT REQUIRED VGS = 0V
ABSOLUTE MAXIMUM RATINGS1
@ 25 °C (unless otherwise stated)
Maximum Temperatures
Storage Temperature -55 to 150°C
Junction Operating Temperature -55 to 135°C
Maximum Power Dissipation
Continuous Power Dissipation @125°C 360mW
Maximum Currents
Forward Current 20mA
Reverse Current 50mA
Maximum Voltages
Peak Operating Voltage POV = 50V
COMMON ELECTRICAL CHARACTERISTICS @ 25 °C (unless otherwise stated)
SYMBOL CHARACTERISTIC MIN TYP MAX UNITS CONDITIONS
POV Peak Operating Voltage2 50 V IF = 1.1I
VR Reverse Voltage 0.8 V IR = 1mA
CF Forward Capacitance 2.2 pF VF = 25V, f = 1MHz
TO-92
BOTTOM VIE
AK
12
F(max)
A
K
A
K
SPECIFIC ELECTRICAL CHARACTERISTICS @ 25 °C (unless otherwise stated)
Forward Current3
IF
PART
VF = 25V VF = 25V VF = 6V IF = 0.8I
MIN NOM MAX MIN TYP TYP TYP MAX
J500 0.192 0.24 0.288 4.00 15 2.50 1.2 0.4
J501 0.264 0.33 0.396 2.20 10 1.60 1.3 0.5
J502 0.344 0.43 0.516 1.50 7 1.10 1.5 0.6
J503 0.448 0.56 0.672 1.20 5 0.80 1.7 0.7
J504 0.600 0.75 0.900 0.80 3.5 0.55 1.9 0.8
J505 0.800 1.00 1.200 0.50 2. 0.40 2.1 0.9
J506 1.120 1.40 1.680 0.33 1.5 0.25 2.5 1.1
J507 1.440 1.80 2.160 0.20 1 0.19 2.8 1.3
J508 1.900 2.40 2.900 0.20 0.7 0.13 3.1 1.5
J509 2.400 3.00 3.600 0.15 0.5 0.09 3.5 1.7
J510 2.900 3.60 4.300 0.15 0.4 0.07 3.9 1.9
J511 3.800 4.70 5.600 0.12 0.3 0.05 4.2 2.1
Dynamic Impedance4
Zd
Knee
Impedance
Zk
Limiting Voltage5
VL
F(min)
Linear Integrated System
• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261
s
V-I CHARACTERISTICS CURRENT REGULTING DIODE
I
F
V
I
F
P
OV
V
F
V
Z
k
L
r
DS
R
V
R
I
R
PACKAGING DETAILS
TO-92
0.170
0.195
0.175
0.195
LS XXX
YYWW
0.130
0.155
0.045
0.060
0.016
0.500
0.610
12
0.095
0.105
1. Absolute maximum ratings are limiting values above which serviceability may be impaired.
2. Pulsed, t = 2ms. Maximum V
3. Pulsed, t = 2ms. Continuous currents may vary.
4. Pulsed, t = 2ms. Continuous impedances may vary.
5. Min V
Information furnished by Linear Integrated Systems is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any
infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent
rights of Linear Integrated Systems.
required to ensure IF = 0.8I
F
where IF < 1.1I
F
.
F(min)
F(max)
.
0.022
DIMENSIONS
IN INCHES.
0.014
0.020
Linear Integrated System
• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261
Loading...