Linear LV-D4-2MDI Instruction Manual
Network Camera setup and installation guide. Browser setup with settings explained.
Product Made in China under ISO9001 & ISO1400 standards
Manual Printed in China v1.0
NETWORK CAMERA GUIDE
Install
Browse
Use
01.BSM.11.0086801
Network Dome
Camera
Instruction
Manual
English Version 1.0
CAUTION
RISK OF ELECTRIC S HOCK
DO NOT
OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT
REMOVE COVER. NO USER SERVICABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The
lightning fla sh with arrowhead symbol, within an
equilateral triang le, is intended to alert the user to the
presence of un-insulated "dangerous voltage" within the
product’s enclosure that
may be
of sufficient magnitude to
constitute a risk of electric shock.
The
exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature
accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT
EXPOSE THIS UN IT TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE W IDE SLOT AND FULLY
INSERT.
Important
Safeguards
In addition to the careful atten tion
devoted
to quality standards in the manufacturing process of
your
video
product, safety is a major factor in the design of
every
instrument.
However,
safety is
your responsibility too. This sheet lists import ant information that will help to assure your
enjoyment and proper use of the
video
product and
accessory
equipment. Please read them
carefully before operating and using your
video
product.
Installation
1.
Read and Follow Instructi ons - All the safety and
operating instructions should be
r
ead before
the
video
product is operated. Follow all oper
ating
ins
tr
uctions.
2.
Retain Instructions - The
safety and operating
instructions should be retained for future
refer
ence.
3.
Heed Warnin gs - Comply with all warnings on the
video
product and in the operating ins
tru
ctions.
4.
Polarization - Do not defeat the
safety purpose of the polarized
or
grounding-type plug.
A polarized plug has two blades
with one wider t han the
other.
A grounding type plug has two
blades
and
a third groundi ng prong.
The wide
blade or the third prong
are provided for
your safety.
If the provided plug does not fit into
your outlet,
consult an electrician for replacement of the
obsolete outlet.
5.
Power Sources -
This
video
product should be
operated only from the type of power
sour
ce
indicated on the marking label. If
you
are not sure of
the type of power supply to your
loca
tion, consult
your
video
dealer or local
power
company.
For video
products intended to operate from battery power,
or
other sources,
refer
to the operating ins
tru
ctions.
6.
Overloading - Do not overload wall outlets of
extension cords as this can
result
in the r isk of
fire
or electric shock.
Overloaded AC
outlets, extension
cords,
frayed power
cords,
damaged
or cracked wi
re
insulat ion, and broken plugs are
dangerous.
They
may
result
in a shock
or
fire hazard. Periodically
examine the cord,
and if its
appearance
indicat
es
damage or deteriorated insulation,
have
it re
plac
ed
by your service te
chnician.
7.
Power Cord Protection - Power supply cords should
be routed so that they are not
likely to be walked on
or pinc hed by item s placed upon or against them,
paying
particular attention to cords at plugs,
convenience receptacles,
and the point where they
exit from the
video product.
8.
Ventilation - Slots and openings in the case are
provided
for
ventilatio n to ensure reliable operat
ion
of the
video
product and to protect it from
overheating.
These openings
must not be blocked
or
covered. The
openings should never be blocked by
placing the
video
equipm ent on a bed, sofa, rug,
or
other similar surface. Thi s
video
product should
never be placed near or over a radiator or heat
register.
This video
product should not
be
placed in a
built-in installation such as a
bookcase
or ra
ck
un
l
ess
proper ventilation is provided or the video
product manufacturer’s instructions
have
been
fo
llow
ed.
9.
Attachments - Do not use attachments
unl
ess
r
ecommended by
the
video
product manufacturer as
they may
cause
a h
azard.
10.
Camera Extension Cables – Check
the rating of
your extension
cable(s)
to verify compliance with
your
local authority regulations prior t o inst
allation.
11. Water
and Moisture - Do not use this
video product
near water. For example, near a bath tub, wash
bowl, kitchen si nk or laundry tub, in a w
e
t
basement, near a swimming pool and the
like.
Caution: Maintain elec trical safety.
Powerline
operated
equipm ent or accessories connected to
this uni t should bear the UL listing mark of CS A
certification mark on the
accessory
itself
and shou
ld
not be modified so as to defeat the safety
fea
tures.
This
will
help
avoid any
potential hazard
from
electr ical shoc k or fi re. If in doubt, contact qualified
service personnel.
12.
A
ccessories -
Do not place this
video
equipm ent on an unstabl
e
cart, stand, tripod, or table. T he
video
equipment may fall, causing
serious
damage
to the video
product. Use this
video product
only with a cart, stand,
tripod,
bracket, or table
r
ecommended
by th
e
manufacturer or sold wit h the
video
product. Any
mounting of the p roduct should
follow the
manufacturer’s instructions and use a mounting
accessory reco
mmended by the manufacturer.
General
Precautions
Service
13.
Servici ng - Do not attempt to service this video
equipment yourself as opening
or removing covers
may
expose
you to dangerous voltage or other
hazards.
Refer all servicing to q ualified ser vice
personnel.
14.
Conditions Requiring Service - Unplug this video
product from the
wall outlet and
refer
servicing to
qual
ifi ed service personnel under the following
cond
itions:
•
When
the power supply cord or plug is damaged.
•
If liquid has
been
spilled or objects
have fallen int
o
the
video product.
•
If the
video
product has been
exposed
to
rain or
water.
•
If the
video
product
does
not operate normally by
foll
owing the operat ing instructions. Adj ust only
those controls that are covered by the operatin
g
instructions. Improper adjustment of other contr
ols
may
result
in
damage
and
will
often re
quir
e
extensive
work by a qual
ified technician to restor
e
the
video
product to its normal operation.
•
If the
video
product
has been dropped
or the cabinet
has been damaged.
•
When
the
video
product exhibits a distinct change
in performance. This indi cates a need
for
service.
15.
Replacement
Parts - When
replacement parts are
required,
have
the serv ice technician verif y that the
replacements used
have
the same safety
characteristics as the original parts. Use of
replacements specified by the
video product
manufacturer can prevent fire,
elec
tric
shock or
other hazards.
16.
Safety Check - Upon completion of
any
service
or
repairs to this
video
product, ask the service
technici an to perform safety checks
r
eco
mme
nded
by the manufacturer to determ ine tha t the video
product is in safe operating
co
ndition.
17. Wall or
Ceiling Mounting - The cameras provided
should be mounted to a w
all or ceiling only
as
instructed in this
guide, using the provided
mounting
br
acke
ts.
18. Heat
-
The product should be situated
away from
heat sources such as radiators, heat
regis
ter
s,
stoves,
or other products (including amplifiers) that
produce
heat.
Use
19.
Cleaning - Unplug the
video
product from the
wall
outlet before cleaning.
Do
not use li
quid cleaners
or
aerosol cleaners. Use a damp cloth
for clea
ning.
20.
Product and
Cart
Combination - Video
and ca
rt
combinat ion should be moved with care.
Quick
stops,
excessive
force, and
uneven
surfaces may
cause the
video
product and cart combination to
o
verturn.
21.
Object and Liquid Ent ry - Never push objects of any
kind into this
video
product through openings as
they may touch dangerous voltage points
or
“short-out”
parts that could
result
in a fire
or
elec
tric
shock. Never
spill
liquid of any kind on the
video product.
22.
Lightning
- For
added
protection
for
this video
product during a lightnin g storm, or when it is
left
unattended and unused
for long
periods of time,
unplug it
from
the wall outlet and disconnect the
antenna
or cable system. This
will prevent damage
to the
video
product due to lightning and power lin e
su
r
ges.
General
Precautions
1. All warnings and instructions in this manual should be followed.
2.
Remove
the plug from the outlet before cleaning.
Do
not use liquid aerosol detergents.
Use
a
water
dampened
cloth for cleaning.
3.
Keep
enough
space
around the unit for ventilation. Slots and openings in the stor
age
cabinet
should not be blocked.
4. During lightning storms, or when the unit is not used for a
l
ong
time, disconnec t the power
supply, antenna, and cables to protect the unit from elect rical
sur
ge.
FCC CLASS A
NOTICE
NOTE
This equi pment has been tested and found to comply with the limits for a Class A digit al device pursuant to
Part 15 of the FCC Rul es. These limits are designed to provide reasonable protection against
ha
rmful
interf erence wh en the equipmen t is operated in a comm ercial en vironment. This equipment generates, uses,
and can radiate radi o frequency energy and, if not install ed and used in accordance wit h the manu
facturer’
s
instruction manual, m ay
cause
harmful i nterference with r adio communications.
Operation
of thi s equipmen t
in a residential area is likely to cause harmful interferen ce, in which case you wil l be requ ired to correct the
interf erence at your own expen se.
This
equipment
has been
certified
and
found to comply with the limits regulated
by FCC, EMC,
and
LVD.
Therefore, it is
designated
to
provide
reasonable protection against interference
and
will not
cause
interference with othe r appliance usage.
However,
it is imperative that the user follows the guidelines in this manual to
avoid
improper
usage which may result in damage to the unit, electrical shock and fi re hazard injury.
In order to improve the feature functions
and
quality of this product, the specifications are
subje
ct
to
change
without noti ce from time to time.
Features
•
HD
CMOS
Progressive Scan
•
720p or 1080p models with
real-time
(25/30
fps)
•
Triple-streaming
(H.264/MJPEG)
•
Future proof
ONVIF 2.1
compliance
(1.02
backwards co
mpatible)
•
Compatible with popular third party
VMS
software*
•
Power-over-Ethernet
(PoE)
operation,
14Watt max/12V
operation
•
Backup options: micro SD card,
FTP, NAS, local
•
Mobile Apps: iPhone®, iPad®, Android™
•
Supports two-way audio
•
3.6mm – 12mm Vari-focal lens
•
Internal service video setup & micro SD
•
Multi-browser support:
IE,
Firefox, Safari, Chrome
•
3-axis gimbal
for versatile mounting
*
Check Onvif com pliance o n for your sof tware.
TABLE OF
CONTENTS
1.
Getting
Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Default Camera Username, Password, and Ports . . . . . . . . . . . 1
1.2 Camera Interior Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 2
1.2.1
Functions of Status LED’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3
ONVIF
Compatibility and Included Software Overview . . . . . . . . 3
1.3.2
NVMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3.3 CD Cont ents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.
Connection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.
Camera
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.
Finding
the
Camera’s
IP
Address
. . . . . . . . . . . . . . . . . . 8
4.1 Finding the Camera’s IP Address Using NVMS . . . . . . . . . . . . . . 9
4.2 Finding the Camera’s IP Address using
UPnP
in Windows® 7. .9
4.3 Finding the Camera’s IP Address using Bonjour® in Mac OS®
10
4.4 Finding the Camera IP using the BNC Test Cable . . . . . . . . . . .
. 11
5.
Configuring Remote
Connection
. . . . . . . . . . . . . . . . . . 12
5.1
Connecting
to a
DDNS
address using NVMS . . . . . . . . . . . . . . . 15
6.
Web Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.1 Supported Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.2 Chrome, Firefox, and Safari Setup . . . . . . . . . . . . . . . . . . . . . .
. 17
6.3 Internet Explorer® Setup . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 18
6.4
Web
Interface/Live
Video Overview
. . . . . . . . . . . . . . . . . . . . . . . 21
6.4.1
Live
Video
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.4.2
Configuring Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.5
Device
Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.6 Stream Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 24
6.7
Device
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.7.1
Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.7.2 Device
Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.7.3
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.7.4
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.7.5
OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.7.6
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.7.7 BNC Video
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6.7.8
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6.8 Alarm Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.8.1
Disk Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.8.2
Motion Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.9 Local Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6.9.1
Record Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6.9.2
Record Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6.10
Privacy Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6.11
Network Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.11.1
DDNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.12 Service
Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6.12.1 SMTP
(Email Alert Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6.13
Privilege Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
6.13.1
Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
6.13.2
User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
6.13.3
Unlocking User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.14
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.14.1
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.15 Device
Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.16
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.17
Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.17.1
Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.17.2
Shutter Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.17.3 Gain
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.17.4
Day/Night Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.17.5
Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
6.17.6
Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
6.17.7 AE
Meter
Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6.17.8 WB
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6.17.9
WDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
6.17.10
Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
6.17.11
Noise Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
7.
Resetting
to
Factory
Defaults . . . . . . . . . . . . . . . . . . . 58
8.
Dimensions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
9.
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
1 2
Getting
Started
1.
GETTING
STARTED
The
system comes with the following
components:
•
1 x Camera
•
1 x Mounting Screw
Kit
•
1 x Allen Key
•
1 x
RJ45
Coupler
•
1 x
BNC
Test Cable
•
1 x Mounting Template
•
1 x Quick Start Guide
•
1 x Instruction Manual
•
1 x Software/Documentation CD
Mounting Screw
Kit:
•
3 x 2.8in / 70mm screws
•
3 x 1.2in / 30mm screws
•
3 x 1.6in / 40mm anchors
Allen Key
RJ45
Coupler
BNC Test
Cable
1.1
Default Camera Username, Password, and
Ports
Username: admin
Password: admin
Ports: 80
(HTTP),
30001
(Control/Streaming), 8080
(RTMP),
554 (RTSP)
IP Address:
DHCP Enabled by Default
(Router will automatically assign IP
address)
NOTE:
Once
you
have
completed the basic setup of the camera, it is
recommended to
configure a static IP address. This
will prev
ent the ca
mer
a
IP address changing in the
event
of a power failure. For details,
see
“6.7.1
Local
Network ” on page 26.
Getting
Started
1.2
Camera
Interior Overview
Front of Camera
Rear of
Camer
a
BNC
analog
output
Reset button
Termination cables
3 4
Getting
Started
1.3
ONVIF Compatibility and Included Software
Overview
This camera is
ONVIF v2.1
compliant. It is designed for interoperability
with
popular
VMS’s and NVR’s*,
with backwards compatibility to
ONVIF v.1.02.
For
more information on
ONVIF,
visit www
.onvif
.org
NOTE:
Provided software is
PC
compatible only; Mac
OS® access
to the
cameras is available via Safari® browser only.
1.3.1
NVMS
•
NVMS
is a
client-only solution
that
supports up
to 36 IP
cameras.
NVMS
is a free software provided on the CD.
•
NVMS
supports all the features of the camera. It
can access
micro SD/
SD
card recordings and camera setup over a local network.
•
NVMS
manual is provided on the
CD.
1.3.2 CD Tools
•
CD contents Folders
IP Search ; Search find IP Cameras and set IP address and gateway
NTP Service Tool ; Time Sync Application: IP devices match one PC system time.
FTPUpdater ; Firmware Update tool
IP Support Help Files ; Website support help documents for common problems.
RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use
SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC
Onvif_Help ; documents on Onvif specifications
Open the NTP service ; Windows XP only enables NTP time to be enabled.
Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS
Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10
Files:
IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices
NVMS_Install.exe ; NVR Software installation for PC
NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software
SNMedia_Player.exe ; File Player for recorded files / backup files from devices /
NVMS.
Camera
Installation
2. CONNECTION
The
camera has the following termination cables:
1.
RJ45
Network
Interface:
Connect
to a
router
or switch on your network
using
RJ45
Ethernet cable
(Cat5e
or better).
100Mhz
connection. PoE
supported (class 3
PoE
switch re
quir
ed).
NOTE:
Use
the included
RJ45
coupler to connect to male end of RJ45
Ethernet cable.
RJ45
Coupler
2.
Audio Input (RCA):
Connect
to a self-powered microphone
for listen-in
audio.
3.
Audio Output (RCA):
Connect
to an amplifier or self-powered speaker fo
r
intercom/2-way audio.
4.
DC12V (1A):
12V DC
power input terminal. Make sure to follow corr
ect
polarity (+/-) marked on the power connector when connecting to power.
•
Minimum Power Requirement:
450mA / 5.4W.
Make
sure to follow the correct polarity if connecting
the camera to
DC
power. Polarity is marked on the
power connector.
5 6
Connection
3.
CAMERA
INSTALLATION
Camera
Installation
Initial camera removal
1a) Press down on the tab marked with
an arrow to lift up the dome cover
slightly
1b) While pressing on tab, twist the
dome cover counter clockwise just a
few degrees to release dome cover
from back clips.
Lift off the cover.
3a) Reinsert camera
module into camera base
by aligning the arrow
notches, and turning
camera module clockwise
to lock into place.
3b) Reinstall the base
locking screws. (indicated
by padlock markings)
Skip to next Page
Method 1 - Direct Attach Install
2a) Use included mounting template
to mark and pre-drill the required
holes. Use included 2.8” screws to
mount the camera directly to the
mounting surface.
Skip next page to nalise installation
OR
Method 2 - Camera Base Install
2b) Use the included mounting
template (Installation Option 1)
to mark and pre-drill the required
holes. Remove the camera base
by unscrewing the base locking
screws (indicated by padlock
markings) and turn camera module
approx. 5 degrees counterclockwise
to detach camera base from the
camera module. Install the base as
indicated using the 1.2” screws.
Method 3 - Recess Mount
a) Cut semi ush mounting
hole into surface using
provided Semi-ush
Mount Cut-out Template.
Note: Always cut using the
inside line of the cutout
template
b) Insert camera into cutout.
Make sure that the
mounting arms are not
extended.
c) Turn screwdriver
clockwise to unlock all of
the 3 mounting arms.
d) Continue turning
clockwise to move
mounting arms down until
they make contact with
inner mounting surface.
Note: Once mounting
arms have made
contact with the inner
mounting surface, do
not apply too much
pressure to avoid
damaging surface.
a
b
2
3
a
b
1
a
b
d
c
b
2
7 8
Connection
Addition
Insert a
video
test cable into the
video
test cable te
rminals
and
connect to a test monitor to
set
up
camer
a or find the IP when
running.
Video Test Cable
Finding the
Camera’s IP
Address
4.
FINDING THE CAMERA’S
IP ADDRESS
Use
the steps below to find the camera’s IP address and connect to the
camera over the local area network
(LAN)
using
NVMS, UPnP
on
Windows® 7, or Bonjour® in Mac OS®.
4.1
Finding
the
Camera’s
IP
Address Using
NVMS
1. Install
NVMS
from the
CD. Now
Doubl
e-click
the
NVMS
icon ( ) on the
Desktop.
The log in screen
appears.
2. Under User Name and
Password, enter the default
NVMS
user name
(
admin) and password (admin
).
Click Login.
Enter Admin
Enter Admin
Click Login
3.
NVMS
opens and scans the local network
for
connected ca
mer
as.
Detected camera IP addresses on the LAN appear in the
Device
List on
the
left
side of the screen with a icon.
Found
camera
IP address
a) Re-attach the camera cover, using the thumb screw as a guide,
until it snaps into place.
b) Reattach dome cover.
a) Remove camera cover by
squeezing the back and front
of the cover as indicated by
the arrow indicators at the
same time and lifting it up and
away from the lens.
b) Insert the included video test
cable into the RCA jack and
connect to a test monitor to set
up camera set below.
c) Adjust camera viewing angle
and secure into place by
tightening thumb screw using
a at head screwdriver. Adjust
zoom and focus as required.
Note: Lens adjustment levers
are by default in the locked
position. Turn counter
clockwise to unlock.
Tighten levers to secure
lens setting.
4
3
Zoom
Focus
Thumb Screw
9 10
Finding the
Camera’s IP
Address
4. Click on a camera IP address in
Device
List to lo
gin.
5. Under
User Name, enter the user name
for
the camera (default: admin).
Under
Password, enter the password
for
the camera (default: admin).
Click Continue.
Enter Camera User Name
(default: admin)
Enter Camera Password
(default: admin)
Click Continue to login
6.
The
camera appears under the camera IP address. Click and drag the
camera to the display grid to open
it.
Click and drag the
camera to the display
grid to open
it
NOTE:
For detailed instructions on using
NVMS,
see the NVMS
manual on the CD.
4.2
Finding
the
Camera’s
IP
Address using UPnP
in
Windows®
7
NOTE:
To use
this method, your
router
must support
UPnP and
the ca
mer
a
and
computer must be on the
same
network.
UPnP
is enabled in the ca
mer
a
by
default,
and can be enabled/disabled using
NVMS (check
the NVMS
manual
for details).
Finding the
Camera’s IP
Address
1. Click
Start>Computer>Network. The
camera’s IP address appears
under Network
Infrastructure.
Double-click to open
the camera
Network
2. Double-click the camera to open it in your default browser.
3. Under User Name and
Password, enter the camera’s User Name
(default:
admin) and Password (default:
admin) and click
Login
.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
4.3
Finding
the
Camera’s
IP
Address using
Bonjour® in
Mac
OS®
NOTE:
To use
this method, the camera
and
computer must
be on
the same
network. Bonjour® is enabled by default, and can be enabled/disabl
ed
using
NVMS
(check the
NVMS
manual
for details).
1.
Open
Safari® browser and click the Bookmarks button ( ).
11 12
Finding the
Camera’s IP
Address
2. Click
Bonjour
. The
camera’s IP address appears in the Bonjour Devices
list.
3. Double-click the camera to open it in
Saf
ari®.
Bookmarks
button
Bonjour
Double-click the camera’s IP address
4. Under User Name and
Password, enter the camera’s User
Name
(default:
admin) and Password (default:
admin) and click
Login
.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
4.4
Finding
the
Camera
IP
using
the
BNC Test
Cable
When
the
BNC
test
cable
is
connected
to the camera, the
IP address
is shown
on the test monitor.
The
camera must
be connected
to power to use the BNC
test cable.
NOTE:
The
default IP address of
192.168.0.120
is shown if the ca
mer
a
cannot obtain an IP address from the
router.
Check
the Ethernet/power
connections and
router co
nfigur
ation.
Configuring
Remote
Connection
5. CONFIGURING REMOTE
CONNECTION
Follow the steps below to configure your camera for connections over the
Internet using a web browser,
NVMS,
or other
VMS
software.
Step
1 of 6:
Locate
the
camera’s local
IP address:
•
See
“4. Finding the Camera’s IP Address” on
page 8
.
Step
2 of 6: Port
Forward your
router:
You
need to enable port forwarding for the following ports on your router to
the camera’s local IP address:
•
HTTP
Port (default: 80)
•
Control Port (default: 30001)
NOTE:
If you are configuring multiple IP cameras
for
individual re
mot
e
access, you
must
change
the ports
for
each
camera.
Two
cameras cannot
use the same port number.
NOTE:
Port forwarding the
RTSP
and
RTMP
ports is not
necessary
unless
your installation has special re
quir
ements.
There are two methods for port forwarding:
• You can
manually port forward your router.
See your router’s user manual
for details. An example of a port forwarding screen is shown below.
HTTP
80
80
100
Control
30001
30001
100
Loading...