Linear HS9484-2HB, HS9480 User Manual
Loosen These Screws
Do Not Remove
Camera
Camera
Bracket
1/2-inch
Rubber Plugs
Rear Cap
Ground
Neutral
DESIGNER SERIES HOUSINGS
HS948X SERIES
I NSTALLATION AND O PERATING I NSTRUCTIONS
W WW
. AIGISMECH. C OM
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating
instructions should be read before the unit is operated.
. Retain Instructions - The safety and operating instructions
2
should be retained for future reference.
3. Heed Warnings - All warnings on the unit and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug the unit from the outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7. Accessories - Do not place this unit on an unstable stand,
tripod, bracket, or mount. The unit may fall, causing
serious injury to a person and serious damage to the unit.
Use only with a stand, tripod, bracket, or mount
recommended by the manufacturer or sold with the
product. Any mounting of the unit should follow the
manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
8. Ventilation - Openings in the enclosure, if any, are
provided for ventilation, to ensure reliable operation of
the unit, and to protect it from overheating. These
openings must not be blocked or covered. This unit
should not be placed in a built-in installation unless proper
ventilation is provided or the manufacturer's instructions
have been adhered to.
9. Power Sources - This unit should be operated only from
the type of power source indicated on the marking label.
If you are not sure of the type of power supply you plan
to use, consult your appliance dealer or local power
company. For units intended to operate from battery
power or other sources, refer to the operating
instructions.
10. Grounding or Polarization - This unit may be equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Alternatively, this unit may be equipped with a 3-wire
grounding-type plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
Power Cord Protection - Power supply cords should be
11.
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords and plugs, convenience
receptacles, and the point where they exit from the
appliance.
2. Power Lines - An outdoor system should not be located in
1
the vicinity of overhead power lines or other electric light
or power circuits or where it can fall into such power lines
or circuits. When installing an outdoor system, extreme
care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal. U.S.A.
odels only - refer to the National Electrical Code Article
m
820 regarding installation of CATV systems.
13. Overloading - Do not overload outlets and extension
cords as this can result in a fire or electric shock.
14. Object and Liquid Entry - Never push objects of any kind
into this unit through openings, as they may touch
dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the unit.
15. Servicing - Do not attempt to service this unit yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
16. Damage Requiring Service - Unplug the unit from the
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the
unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions, as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the unit to its normal
operation.
e. If the unit has been dropped or the cabinet has been
damaged.
f. When the unit exhibits a distinct change in
performance--this indicates a need for service.
17. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
18. Safety Check - Upon completion of any service or repairs
to this unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating
condition.
Coax Grounding - If an outside cable system is connected
19.
to the unit, be sure the cable system is grounded. U.S.A.
models only--Section 810 of the National Electrical Code,
ANSI/NFPA No.70-1981, provides information with
respect to proper grounding of the mount and supporting
structure, grounding of the coax to a discharge unit, size
of grounding conductors, location of discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode.
20. Lightning - For added protection of this unit during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet
and disconnect the cable system. This will prevent
damage to the unit due to lightning and power line surges.
2
SAFETY PRECAUTIONS SICHERHEITSVORKEHRUNGEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This label may appear on the bottom of the unit due to space
limitations.
The lightning flash with an arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
SECURITE
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU
VERMEIDEN, ABDECKUNG NICHT ENTFERNEN.
WARTUNGEN ALLER ART QUALIFIZIERTEM PERSONAL ÜBERLASSEN.
Aus Platzgründen kann diese Warnung auf der Unterseite
des Gerätes angebracht sein.
Das Blitzsymbol im gleichseitigen Dreieck soll den
Benutzer auf nicht isolierte "Hochspannung" im
Gehäuse aufmerksam machen, die eventuell stark
genug ist, um einen elektrischen Schlag zu verursachen.
Das Ausrufezeichen im gleichseitigen Dreieck soll
den Benutzer auf wichtige Bedienungs- und
Wartungsanleitungen in der dem Gerät beigefügten Literatur aufmerksam machen.
PRECAUCIONES DE SEGURIDAD
Danger: Pour éviter tout risque d'électrocution, ne pas
ouvrir le boîtier. Il n'y a pas de pièces remplaçables à l'intérieur. Pour toute révision, s'adresser à un technicien
spécialisé.
En raison de limitation de place, cette étiquette peut être
placée sur le dessous de l'appareil.
L'éclair fléché dans un triangle équilatéral, avertit
l'utilisateur de la présence d'une "tension dangereuse" non isolée à l'intérieur de l'appareil et
d'une valeur suffisante pour constituer un risque
d'électrocution.
Le point d'exclamation contenu dans un triangle
équilatéral, avertit l'utilisateur de la présence,
dans la documentation qui accompagne l'ap
pareil, de consignes d'utilisation et de maintenance importantes.
Precaucion: Para Reducir El Riesgo De Choque Eléctrico,
Favor No Abrir La Cubierta. Este Equipo No Consta De
Piezas O Partes Que Requieren Servicio O
Mantenimiento. Para Reparaciones Favor Referirse A Un
Técnico Calificado.
Debido a limitaciones de espacio, esta etiqueta puede aparecer en la parte inferior de la unidad.
El símbolo representado por un relámpago con
punta de flecha dentro de un triángulo equilátero,
se muestra con el objetivo de alertar al usuario
que existen "voltages peligrosos" sin aislamiento,
dentro de la cubierta de la unidad. Dichos voltages pueden ser de tal magnitud que constituyen
un riesgo de choque eléctrico a personas.
El símbolo de exclamación dentro de un triángulo
-
equilátero, se muestra con el objetivo de alertar
al ususario de que instrucciones de operación y
mantenimiento importantes acompañan al equipo.
3
1 UNPACKING
Unpack carefully. This is mechanical equipment and should be
andled with care.
h
Check for the following:
• Housing (with correct model number).
• Hardware Kit - HS9480 & HS9483 Series Models:
1/4-20 x 3/8-in Button Head Screw
1
2 1/4-20 x 1/2-in Button Head Screw
1/4-in Spring Washers
2
1 5/16-in Flat Washer
2 Fittings 3/8-in NPT.
2 Rubber Plugs 1/2-in NPT
2 Fittings 1/2-in NPT
2 Nuts 1/2-in NPT
2.2 Tamperproof Kit
Contains tamper resistant screws and bit key to tamperproof
up to five housings.
HS9480TK: For all HS948x Series Housings.
3 SERVICE
If the unit ever needs repair service or parts, the customer
hould contact Aigis Mechtronics.
s
4 CARE AND MAINTENANCE
Regularly scheduled maintenance will help prolong the
operation life of this unit. Clean the viewing window as needed
with a mild, nonabrasive detergent in water and a soft cloth.
• Hardware Kit - HS9484 & HS9488 Series Models:
1 1/4-20 x 3/8-in Button Head Screw
3 1/4-20 x 1/2-in Button Head Screws
1 1/4-20 x 5/8-in Button Head Screw
1 1/4-20 x 7/8-in Button Head Screw
2 1/4-in Spring Washers
1 5/16-in Flat Washer
2 Fittings 3/8-in NPT
2 Rubber Plugs 1/2-in NPT
1 Rubber Plugs 3/8-in NPT
1 Nut 3/8-in NPT
2 Fittings 1/2-in NPT
2 Nuts 1/2-in NPT
4 Spacers 1/64-in
3 Spacers 1/8-in
1 Supplemental Hardware Kit labeled “C” - HS9484 &
HS9488 Series Models:
1 1/4-20 x 3/4-in Button Head Screw
1 1/16-in Spacer
1 1/8-in Spacer
1 3/8-in Spacer
• Hardware Kit - HS9484-2HBIP and HS9484-2HBIPC
1 1/4-20 x 3/8-in Button Head Screw
2 1/4-20 x 1/2-in Button Head Screws
1 4 Pin Power Connector Quick Connect
2 1/4-inch Spiral Lock Washers
2 2mm x 0.4 x 10 mm Philips Pan Head Screw
If an item appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper. If any items
are missing, notify Aigis Mechtronics.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
2 ACCESSORIES
2.1 Sunshields
Provide protection from the direct rays of sun and promote
cooling to reduce internal housing temperatures. Strongly
recommended for housing to be used outdoors.
HS9480SS: For HS9480 Series Housings.
HS9483SS: For HS9483 Series Housings.
HS9484SS: For HS9484 Series Housings.
HS9488SS: For HS9488 Series Housings.
5 DESCRIPTION
The HS948x Series Housings are smart stylized housings for
indoor and outdoor use. These housings meet customers'
demands for an attractive housing that is both cost competitive
and easy to install. They are available in multiple sizes to fit a
wide range of cameras and lenses.
6 INSTALLATION
This installation should be made by qualified service personnel
and conform to the National Electrical Code and applicable
local codes.
6.1 Model Designation
Model Preinstalled Voltage/ Use with Camera
No. Components
Indoor/Outdoor Units
HS9480 --- --- 24
HS9483 --- --- 24, 115, 230
HS9484 --- --- 24, 115, 230
HS9484IP
HS9484TS --- --- 24, 115, 230
HS9488 --- --- 24, 115, 230
HS9484-12
Outdoor Units
HS9480-2H Heater 24/15 24
HS9483-2H
HS9483-2HB Heater/Blower 24/25 24
HS9483-5H Heater 230/23 230
HS9483-6H Heater 115/23 115
HS9483-6HB
HS9484-2H Heater 24/23 24
HS9484-2HB Heater/Blower 24/25 24
HS9484-2HBIP Heater/Blower/ 24/25 24
HS9484-2HBIPC
HS9484-2HB-12 Heater/Blower 24/25 12
HS9484-5H Heater 230/23 230
HS9484-6H
HS9484-6HBTS Heater/Blower
RJ45
---
Heater
Heater/Blower
RJ45
Heater/Blower/
RJ45/Power Conn
Heater
Tamper Switch 115/23 115
1,2
Power Models with These
3
V/W
--- 24, 115, 230
24
24/23
115/28 115
24/25
115/23
Voltage Ratings
12
24
24
115
4
Loading...