Page 1
I NSTALLATION AND O PERATING I N STRUCTIONS
SUNSHIELD
HS9384SS
Page 2
HS9384SS Sunshield Installation
1DESCRIPTION
Provides protection from the direct rays of the sun and
promotes cooling to reduce internal housing temperatures.
HS9384SS: For use with HS9384 Series Housings.
2UNPACKING
Unpack carefully. Check for the following:
Item Quantity
HS9384SS Sunshield 1
If an item appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper. If any items are
missing, notify Aigis Mechtronics.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
3INSTALLATION
1. Slide the sunshield onto the housing from the rear
(shown) or the front of the housing.
2. Position the slot in the sunshield over the housing
mounting holes.
3. Secure the sunshield by passing the housing mounting
screws (not provided) through the sunshield slot and
tightening them.
4. The sunshield can be adjusted forward and back for
more or less overhang.
100 0031 001 AIG 10/02
Printed in U.S.A.
©2002 Aigis Mechtronics
1124 Louise Road, Winston-Salem, NC 27107-5450
Tel: 336.785.7740 Fax: 336.785.7744
Data subject to change without notice
Sunshield
Front of
Housing
Sunshield
Sunshield
Sunshield Slot
Sunshield
Housing
Mounting
Holes
Housing
Loading...