Linear HS9384-6H Specsheet
• IP68/NEMA-6P
15.790
4.41
18.471
• AllAluminumConstruction
• Built-inHandleforEasy
Installation
• ExcellentProtectionAgainst
Dust & Water
• Built-inWindowHeater/
Defogger
Now Part of
• PressurizationModelOption
Specialty Series Outdoor Housings
HS9384 Series
The HS9384 Specialty Series outdoor housings are designed to protect a camera
and lens from harsh environments. These IP68/NEMA-6P rated housings are
constructed of extruded aluminum and include a camera/lens mounting cradle with
front and rear-end caps. The front-end cap contains the glass viewing window with an
integral heater design that minimizes fogging of the window in high humidity areas
or freezing under cold temperature conditions. The aluminum rear-end cap contains
three liquid-tight fittings that permit pass-through of video coax, AC power, and
lens control wiring. The pressurized version includes one prewired military-style
connector.
The permanent base permits mounting to pan/tilts, adjustable heads, and various
wall mounts, and the built-in handle on the back of the housing allows for quick
installation and service.
o r d e r i n g g u i d e
Order the housing that meets your needs. Start with the Model number, then specify your power requirements.
Select from the options available to complete your custom housing. If you need further customization - call the
factory with your exact specification requirements.
ex ample : HS 93 84-2Hp-9
model power heater pressurization housing length*
HS9384 -2 H P -9
Specialty
Outdoor
Housing
* All housings come standard 16-inch length, -9 added to a part number is for a 9-inch length housing.
o p ti o nS
Rated Input
(Voltage Range)
Heater
Power Transformer
(Voltage Output)
Standard
Cable Entry
Pressurization
Models *
* Other connectors are available (e.g. 18 - 11, 20 - 24). Call factory for specific requirements.
-2 - 24 VAC, 50/60 Hz
-5 - 220 VAC, 50/60 Hz
-6 - 115 VAC, 50/60 Hz
option
-2H
-5H
-6H
-H
-5H
The power transformers included with these housings are used to step voltage down
-6H
One Corrosion-resistant 20 - 16 (shell size 20, 16-pin) MIL-C-26482 connector with mating connector and crimp pins supplied. Connections for Cat -5/6e,
AC power, video, and lens control. Crimp pins accept wire gauges 20 - 16 AWG
-P
(24 - 20 AWG for 11 - pin and 24 - pin connectors).
Pressurization Model can be filled with Dry Nitrogen pressure upon request.
H - window heater/
defogger
Includes thermostatically controlled window heater/defogger.
Three liquid-tight fittings. Accepts the following cable diameters:
one fitting 0.09 in to 0.25 in (2.3 mm to 6.4 mm),
two fittings 0.15 in to 0.39 in (3.8 mm to 10 mm).
P - optional
Pressurization
model
24 VAC, 50/60 Hz (21.6 to 26.4)
220 VAC, 50/60 Hz (207 to 253)
115 VAC, 50/60 Hz (108 to 132)
(Heater requires 10 watts)
from 115 VAC to 24 VAC
-9 - 9 inch housing*
S p e c i f i c a t i o n S
Maximum Camera/Lens Size
HS9384-5H, -6H, -5HP, -6HP
HS9384-2H, -2HP
HS9384-2H-9, -2HP-9
Window
Housing Mounting
Camera Mounting
Construction
Finish
Dimensions
Accept cameras up to 2.5 x 2.3 in (64 W x 58 H mm), lenses up to 2.6 x 2.9 in (67 W x 75 H mm) ,
and camera/lens combinations up to 11.5 in (292 mm).
Accept cameras up to 2.5 x 2.3 in (64 W x 58 H mm), lenses up to 2.6 x 2.9 in (67 W x 75 H
mm), and camera/lens combinations up to 14.0 in (355 mm).
Accept cameras up to 2.5 x 2.3 in (64 W x 58 H mm), lenses up to 2.6 x 2.9 in (67 W x 75 H
mm), and camera/lens combinations up to 5.75 in (146 mm).
0.118 in (3 mm) thick glass. Includes thermostatically-controlled window heater/defogger.
Three (3) 1/4-20 tapped holes.
Removable cradle assembly with hole pattern for mounting camera/lens assembly. Cradle may be
rotated through 360°.
Non-Pressurized Models: All aluminum construction. Extruded housing, one-piece camera
cradle with front and rear caps. Front cap contains glass faceplate. Cradle secured by external
captive screw at the rear of the unit.
Pressurized Models: All aluminum construction. Extruded housing, two-piece camera cradle.
Separate front cap secured by snap rings. Rear cap contains corrosion resistant connector, fill
valve and relief valve. Camera cradle and rear cap secured in place by snap ring at rear of unit.
Light gray.
See drawings.
Loading...