Linear HDMI-SW-4X2M Owner's Manual

4X2 Switcher For d

Model # HDMI-SW-4X2M

USER MANUAL

www.linearcorp.com

ASKING FOR ASSISTANCE

Technical Support:

Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

6:30 AM - 4:30 PM PST Monday through Friday.

Email:

[e-mail]

Website:

www.linearcorp.com

Notice

Linear LLC reserves the right to make changes in the hardware, packaging

and any accompanying documentation without prior written notice.

© 2008 Linear LLC, All Rights Reserved

TABLE OF CONTENTS

Introduction / Operation Notes

1

Features

2

Panel Descriptions

3

Connecting and Operating the 4X2 Switcher For HDMI

4

RMT-2 Installation

5

IR Code Conicts

6

RS-232 Interface

7

Wiring Diagram

8

Specications

9

Warranty

10

INTRODUCTION

The Linear 4x2 Switcher for HDMI routes high denition video in multiple resolutions

up to 1080p plus multichannel digital audio from any of four sources. Four inputs

accommodate the simultaneous connection of up to four high denition video sources,

such as satellite systems and Blu-ray and HD-DVD players. Two outputs send the high

denition audio/video signals up to two high denition displays. A digital audio output

port is available if you need to direct the audio to an audio receiver. Switching is done
via the IR remote that is provided with the unit.

How It Works
You simply connect all your sources to the switcher’s HDMI inputs. Then connect up

to two displays on the switcher’s HDMI outputs. Once the sources, the Switcher and
the display(s) are powered and connected, you simply select which source you want
to view using the IR remote.

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 4X2 SWITCHER FOR HDMI

Display information (EDID) is sent from the display connected to HDMI •
output port 1 to all of the sources connected to the 4X2 Switcher for
HDMI. If there is no display connected to HDMI output port 1, the EDID
from the display connected to HDMI Output Port 2 will be used. (See note
on page 4 for additional information)

The 4X2 Switcher For HDMI can only mirror one input video signal at a time to •
both display outputs. The user can choose which of the four HDMI inputs will be
displayed on both HDMI outputs

HDMI/HDCP compliant•
Compatible with all HDMI and DVI* displays•

NOTE: When used with a HDMI to DVI adapter.

1