Page 1
Now Part of
• Onboard CCTV camera included with base model
• 650TVL Color Hi-Res Camera, 3.0mm wide angle lens
• Low power consumption, < 3W
• Durable aluminum construction
• Accepts up to five cameras; two side-facing and three
front-facing
• Cameras mount covertly behind half-foot markers
• Fits most standard door frames (1.75”)
• Highly visible color coded height levels
• Two piece construction for easy installation
• Accessory bracket rotates entire unit 90° left or right to
view directly across doorways.
Height Strip Camera
Height Strip cameras can be coupled with ceiling-mounted CCTV cameras to
augment businesses’ surveillance capabilities. The ceiling cameras capture the
subject’s height as he or she passes the height strip while the camera on-board
the Height Strip captures facial images. Businesses that install height strip
tape without an on-board camera run the risk of failing to capture facial images
of subjects wearing a hat or hood.
The Aigis Height Strip Camera was designed with ease of installation and high
adjustability in mind. The curved front surface of the unit and tinted viewing
windows allow the camera to be rotated for site-specific adjustments. The
camera’s 3.0mm IR corrected wide-angle lens provides a 78° horizontal field
of view. The camera can be turned 22° left and right of center to capture the
desired view.
Cable entry through the top, bottom, or rear of the unit allows the unit to be
installed in a wide variety of environments. Equip the unit with an additional
accessory camera and mount the Height Strip Camera between two doors to
cover both entrance and exit with a single unit. Side-facing cameras can be
installed to provide a profile shot across a doorway while the other on-board
cameras face into the business.
Notes:
Standard unit is painted white with color coded decals. Custom colors are
available; contact the factory for details. No angle adapter required to change
viewing angle; cameras turn independent of the height strip casing. Camera
ships pre-focused and a 12VDC power supply is included.
Part Numbers
HC1CH30-6 Height Strip, white
HC1CH30-6B Height Strip, black
HC1CH30-6S Height Strip, silver
HC1CH30-6BZ Height Strip, architectural bronze
oPtioNs
-N
indicator markers (Ex: bronze Height Strip with
no labels = HC1CH30-6BZN)
accessories
CAM-HC1CH30-6
pre-focused, power supply (110VAC to 12VDC, 0.5A)
included
MT-HC Accessory Bracket, Rotates Entire Height Strip
90° Left or Right
PS-HC1CH30 Accessory Power Adapter, converts 24VAC to
12VDC, powers one camera
Height Strip (any color) sold without the height
Accessory 650 TVL Color Camera w/ 3.0mm lens
Page 2
Specifications
Back View
Height Strip Camera
Linear Part Number
Camera Type
Image Sensor
Signal System
Effective Pixels
Resolution
Mimimum Illumin
S/N Ratio
Control Method
Electronic Shutter
White Balance
AGC
BLC
Gamma Correction
Lens
Power Supply
Power Consumption
DSP Features
Operating Temperature
HC1CH30-6xx
Color Hi-Res
1/3” CCD
NTSC
768 (H) x 494 (V)
650tvl
0.001Lux/F2.0
≥50dB (AGC OFF)
OSD
1/60-1/100,000 Sec
Auto
Auto
Auto / Manual
0.45
3.0mm / F2.0
DC12V
150mA
DWDR, 3D DNR, Sense-Up
-10°C ~ +50°C (+14°F ~ +122°F), 95% RH Max
Dimensional Outlines
Side View
(ø.19 X3) MOUNTING HOLES
Back View
in
mm
To p Down
1.7
43.2
1.6
40.6
7.5
190.5
Viewing window
for camera
14.7
374.7 247.7
12
304.8
Viewing window
for camera
6
34
863.6
152.4
9.7
304.8
12
Viewing window
for camera
3
76.2
2.5
63.5
Bottom Up
Now Part of
1950 Camino Vida Roble, Suite 150
Carlsbad, CA 92008
Tel: 760.438.7000 800.421.1587
www.aigismech.com • www.linearcorp.com
231449 BCopyright © 2012 Linear LLC
Loading...