Linear DMC1CD, DMC1CDA, DMC1CDB Owner's Manual
dmc1CD
Installation Instructions
Important Safety
Instructions
READ ALL INSTRUCTIONS CAREFULLY BEFORE
INSTALLING OR USING THE DMC1 SYSTEM
THE dmc1CD MUST BE INSTALLED BY A M&S SYSTEMS DEALER
OR INSTALLERS, AND MUST CONFORM TO ALL LOCAL
BUILDING AND ELECTRICAL CODES.
Warning: always follow these safety instructions.
Retain these instructions for future system reference.
• Adhere to all warnings on the
dmc1CD and in these instructions.
Follow all operating and installation
instructions.
• CAUTION: These installation and
servicing instructions are for use by
qualified personnel only. To reduce
the risk of electric shock, do not
perform any servicing other than
that contained in the operating
instructions unless you are qualified
to do so.
www.mssystems.com | 800.421.1587 | www.mssystems.com
1
Page
dmc1CD
Installation Instructions
• DO NOT attempt to service the dmc1CD yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
• Finish out the dmc1CD system after the application of wall covering
material.
• Do ensure that all rough-in instructions have been followed before
power is applied to the dmc1 system.
• Do not over-tighten the screws for the dmc1CD player as the
plastic face panels may crack or strip out.
• Use only M&S Systems certified replacement parts and have them
installed by an M&S Systems dealer or installer. Unauthorized
substitutions can result in fire, electric shock, or other hazards.
• Upon completion of any service or product repair, have the M&S
Systems dealer or installer conduct a safety check to ensure the
system is in proper operating condition.
• Use only a damp cloth to clean the dmc1CD player. Do not use
liquid cleaners or aerosol cleaners.
M&S audio products are backed with more than 50 years of experience
in the design and manufacture of precision acoustical equipment for
the home. To ensure that the homeowners receives the high-quality
music and voice reproduction that the system is designed to deliver, it
is important that each step of the installation be done carefully. In the
event you need troubleshooting assistance, please call our technical
staff at 1-800-421-1587.
www.mssystems.com | 800.421.1587 | www.mssystems.com
2
Page
Loading...