®®
310 MHz310 MHz
Stanley compatibleStanley compatible
radio controls.radio controls.
• For use with all dip-switch based Stanley garage• For use with all dip-switch based Stanley garage
door operators and gate control operators.door operators and gate control operators.
• Radios for all your garage door and gate operator• Radios for all your garage door and gate operator
applications.applications.
• Single and multi-channel models; wide range of• Single and multi-channel models; wide range of
transmitter styles.transmitter styles.
Miniature
Wall-Mounted
Transmitters
Mini Transmitters:
Model 308302 Two-Channel,
Two-Button Transmitter
Micro Transmitter:
Model 108210 One-Channel,
One-Button Transmitter
• Test/operate LED
• Molded-in hole to accept keychain or keyring
• Supplied velcro strip for visor or dashboard mounting
• Two-channel model (308302) operates two independent
garage doors or an automatic gate and a garage door
Specifications
Power: long-life 12 V battery
Frequency: 310 MHz
Codes: 1,024 (set by dip switches)
Dimensions: mini (2.5 x 1.5 x .625 inches); micro (2 x 1.5 x
.625 inches)
Handheld
Transmitters
Model 105015 One-Channel,
One-Button Transmitter
Model 109410 Two-Channel,
Two-Button Transmitter
Model 109710 Four-Channel,
Four-Button Transmitter
• Test/operate LED
• Easy access to battery and dip
switch
• Two-channel model (109410) operates two
independent garage doors or an automatic
gate and a garage door; four-channel model
(109710) provides control of up to four separate operations
Specifications
Power: long-life 9 V battery
Frequency: 310 MHz
Codes: 1,024 on one and two-channel models; four-channel
features two sets of dip switches, offering 512 codes each
Dimensions: 3.75 x 2.5 x .875 inches
Gate Edge
Transmitters
Model 105104 Wireless Safety Edge
Transmitter
• For use with safety edges on gates and large
commercial doors
• Can be used where hard wires are impractical
• Easy to install and mount
• More economical than coil/cord sets
Specifications
Power: 9 V battery
Frequency: 310 MHz
Codes: 1,024 (set by dip switches)
Dimensions: 4 x 4.28 x 2.22 inches
Lighted Keypads
Model 298601 Wireless Keypad
• Tamper-resistant and weatherproof
• Easy mounting with two screws
• 12-button, alphanumeric keypad
• LED mode indicator
Specifications
Power: 9 V battery
Frequency: 310 MHz
Codes: 4-digit PIN code access
Dimensions: 2.75 x 6.25 x 1 inches
Receivers
Model 309013 General Purpose Digital Receiver
• Exclusive two-way lugs that fit right under terminal screws or
accept push-on terminals in remote sites
• 11-inch wire antenna supplied
• Three tabs for universal operator mounting
Specifications
Power: for connection to any three-terminal
24 V operator (for higher voltages,consult
factory); no need for transformer or adapter
Frequency: 310 MHz
Codes: 1,024 (set by dip switches)
Dimensions: 3 x 5.5 x 1.5 inches
Model 109931 Gate Receiver
• For use inside metal enclosures and in other applications
requiring stronger signal reception
• Antenna with coaxial connector supplied
• 1 amp output @ 30 Vac maximum on relay contacts
Specifications
Power: 24 V input
Frequency: 310 MHz
Codes: 1,024 (set by dip switches)
Dimensions: 5.25 x 3.625 x 1.5 inches
Model 203102 Light-Duty Commercial Gate
Receiver
• For any application requiring two
channels in one location—512 codes
each channel
• Housed in light, stamped steel cabinet
• Ideal for sites with dual-channel
requirement and a protected
environment
• Two-channel relay output, N/O, N/C,
Common -rated 1 amp @ 30 Vac max
Specifications
Power: 24 Vac
Frequency: 310 MHz
Codes: 1,024 total (set by dip switches);
512 codes each of two channels
Dimensions: 6 x 8 x 2 inches
2055 Corte Del Nogal, Carlsbad, CA 92009
(760) 438-7000 (800) 421-1587 Fax (800) 468-1340
www.linearcorp.com
Copyright 2003, Linear Corporation 03-10 P/N 218299 C Printed in China