Linear 2GIG-Z-BRDG-433 Specsheet
Z-Wave Energy Bridge
SKU: 2GIG-Z-BRDG-433
UPC: 8-17082-01078-6
We are pleased to announce to 2GIG distributors and dealers the availability of the
new 2GIG Z-Wave Energy Bridge. The Energy Bridge enables whole-home energy
monitoring providing home owners the information they need to make intelligent
decisions about their energy usage.
This Z-Wave plug-in module, used in conjunction with CurrentCost’s Sensable
Transmitter and CT clamp, will display on the Go!Control screen current energy
consumption. The user can also see a comparison of energy usage over different
time periods including prior 24 hours, 7 days, 30 days, and 12 months.
FEATURES
• Whole-home energy monitoring
• Real-time energy usage at a glance
• Energy-usage comparison with previous time
periods
• Z-Wave connectivity to the Go!Control panel
• One-controlled outlet for control and dimming of
lamps
SPECIFICATIONS
• Z-Wave signal frequency: 908.42MHz
• Operational Voltage: 120VAC, 60Hz
• Z-Wave Range: up to 100ft. line of sight between
the Controller and/or closest Z-Wave Receiver
module
PRICING
Contact your 2GIG Distributor or Sales Representative
for pricing details.
PRODUCT AVAILABILITY, ORDERING
AND SHIPPING INFORMATION
Orders for these new SKUs will be accepted starting
February 28, 2014. The estimated date dealers can order
from distributors is March 7, 2014. Dealers should
check availability with distributors.
• Load:
• Incandescent: 600W Max, 120VAC�
• Resistive: 15 amps (1800 watts )
Maximum 120VAC
• Motor: 1/2 H.P. Max, 120VAC
SYSTEM REQUIREMENTS
• Go!Control security panel
• Firmware v1.10 or higher
• CurrentCost CT Clamp and Transitter
WARRANTY
The new Linear Z-Wave SKUs ship with a standard
1 year limited warranty. Please refer to the Install
Guide for specific warranty details.
For sales questions call 866-670-1591 or email us at sales@2GIG.com.
For all product announcements, datasheets, technical information, etc., please visit the 2GIG dealer site
at www.2GIG.com or email us at 2GIGtechsupport@linearcorp.com.
Specifications, features, warranty, and availability subject to change without notice.
2014 2 21
Z-Wave Energy Bridge
SKU: 2GIG-Z-BRDG-433
UPC: 8-17082-01078-6
FREQUENTLY ASKED QUESTIONS
Q. How does the 2GIG Z-Wave Energy Bridge work?
A. The Z-Wave Energy Bridge works in conjunction
with the Go!Control panel and Sensable Transmitter.
The Energy Bridge is wirelessly paired with the
CurrentCost Transmitter and also learned into the
Go!Control panel as a Z-Wave device. Once
installed the Energy Bridge relays energy
consumption information from the transmitter to
the Go!Control panel. See Figure 1.
Q. How many Energy Bridges can be used in a house?
A. Each Go!Control system can have one Energy
Bridge installed.
Q. What CT clamps will the Energy Bridge work with?
A. The Energy Bridge works with the CurrentCost
Sensable Transmitter and CT clamp.
Q. Where can I buy a CurrentCost Sensable
Transmitter and CT clamp?
A. The CurrentCost Transmitter and CT clamp can be
purchased from simpleenergyworks.com
(www.simpleenergyworks.com/envi_energy_moni
tor.html)
Q. Is the Energy Bridge difficult to install?
A. The Z-Wave Energy Bridge is easy to install. It
plugs into any wall outlet and learns-in to the
Go!Control like other Z-Wave devices.
Installation of the CurrentCost Transmitter and CT
clamp requires a licensed professional installer.
Figure 1.
For sales questions call 866-670-1591 or email us at sales@2GIG.com.
For all product announcements, datasheets, technical information, etc., please visit the 2GIG dealer site
at www.2GIG.com or email us at 2GIGtechsupport@linearcorp.com.
Specifications, features, warranty, and availability subject to change without notice.
2014 2 21
Loading...