Linear 2GIG-VAR-4ROUT, 2GIG-VAR-8OUT, 2GIG-VAR-BRD Specsheet

MODULES

VARIO MAIN BOARD

Model #: 2GIG-VAR-BRD

The Vario Main Panel Board offers install flexibility with features
like, selectable bell output and case tamper, for enclosure door
and wall. The Easy to install plug-in BUS header saves time in
wiring. Each panel provides four programmable outputs, 1 NO/NC
Dry Contact Relay and 3 programmable outputs.

The Vario Main Board comes equipped with:

• 8 hardwire zones

• 4 programmable outputs

• Supports 4 wire smoke detectors with auto reset

• Internal and external tamper switches

• Barrel or terminal connections for power

• Supervised bell or speaker output

#1 most installed home control system

WORKS WITH ALL VARIO PANELS

Input Power: AC/DC Adaptor 100-240V 50/60Hz 14.4V – 1.5A, 4A

Current Consumption: 60 mA, typical / 70 mA, maximum

Rechargeable Standby
Battery:

Maximum Charging Time: 24 Hours

Auxiliary Power: 1.5A PS: Total current 800mA; Maximum Aux =

Programmable Outputs: U01: Dry contact relay (24V, 1 Amps)

Main Enclosure
Dimensions:

Bell/LS (External): Bell/LS (External) Sounder Output: 12 VDC @

Fuses: F1: Battery Power 3.0 A

Operating Temperature: 14°F to 131°F (-10°C to 55°C)

Storage Temperature: -4°F to 140°F (-20°C to 60°C)

Weight: 0.31lbs (0.14Kg)

1.5A PS: 12 Volts up to 7 Amp-Hours, typical

4A PS: 12 Volts up to 17 Amp-Hours, typical

500mA; Maximum BUS (AUX RED) = 800mA

4A PS: Total current 1,500mA; Maximum Aux =
500mA; Maximum BUS (AUX RED) = 800mA

Bell/LS (External): 12V DC @ 500 mA, maximum

U02-U04: 100 mA, up to relay

2GIG-VAR-BOX Polycarbonate Box

11.42” W x 10” H x 3.82” D

(290 mm x 254 mm x 97 mm)

900 mA, maximum

*: Total Current Bell+Aux = 1.5A

F2: Auxiliary Power 2.0 A
F3: Bell/Loudspeaker Power 1.0 A

VARIO 8 ZONE EXPANSION BOARD

Model #: 2GIG-VAR-ZE8

Power: 13.8 VDC +/- 10%

Max Current Consumption: 25 mA, typical / 30 mA, maximum

Main Panel Connection: RS485, 4 Wire Bus, up to 984 ft. (300m) from

Auxiliary Outputs: AUX: Dry contact relay (24V, 1 Amps)

Adds an additional 8 hardwire zones to the Vario panel. Installs on
the keypad BUS to accommodate remote mounting for easier wire
runs. Includes an on-board tamper for installation in the 2GIG­VAR-ACCBOX.

Dimensions: 4.13” W x 2.6” H x 0.71” D

Operating Temperature: 14°F to 131°F (-10°C to 55°C)

Storage Temperature: -4°F to 140°F (-20°C to 60°C)

WORKS WITH ALL VARIO PANELS

Main Panel

(105 mm x 66 mm x 18 mm)

VARIO 8 OUTPUT EXPANDER

Model #: 2GIG-VAR-8OUT

Adds eight programmable, low current outputs for triggering devices,
such as CCTV, Access Control and Building Automation systems. This
output expander installs as a keypad bus device, enabling remote
configuration changes of a particular output, saving potential truck
rolls and the flexibility of remote mounting. Includes an on-board

tamper for installation in the 2GIG-VAR-ACCBOX.

VARIO 4 OUTPUT EXPANDER

Model #: 2GIG-VAR-4ROUT

WORKS WITH ALL VARIO PANELS

Power: 13.8 VDC +/- 10%

Max Current Consumption: 25 mA, typical / 160 mA, maximum

Main Panel Connection: RS485, 4 Wire Bus, up to 984 ft. (300m) from

Main Panel

Contacts: 4 Form C (SPDT) Relays; 5A / 24 VDC

Dimensions: 4.13” W x 2.6” H x 0.71” D

(105 mm x 66 mm x 18 mm)

Operating Temperature: 14°F to 131°F (-10°C to 55°C)

Storage Temperature: -4°F to 140°F (-20°C to 60°C)

WORKS WITH ALL VARIO PANELS

Power: 13.8 VDC +/- 10%

Max Current Consumption: 25 mA, typical / 160 mA, maximum

Main Panel Connection: RS485, 4 Wire Bus, up to 984 ft. (300m) from

Adds four programmable NO/NC dry contact relays for triggering
high current loads, such as magnet locks and door strikes. This
output expander installs as a keypad bus device, enabling remote

Contacts: 4 Form C (SPDT) Relays; 5A / 24 VDC

Dimensions: 4.13” W x 2.6” H x 0.71” D

configuration changes of a particular output, saving potential truck
rolls and the flexibility of remote mounting. Includes an on-board

tamper for installation in the 2GIG-VAR-ACCBOX.

Operating Temperature: 14°F to 131°F (-10°C to 55°C)

Storage Temperature: -4°F to 140°F (-20°C to 60°C)

VARIO 3A SWITCHING POWER SUPPLY

Model #: 2GIG-VAR-PS3A

Power: 13.8 VDC +/- 10%

Max Current Consumption: 25 mA, typical / 160 mA, maximum

Main Panel Connection: RS485, 4 Wire Bus, up to 984 ft. (300m) from

Contacts: 4 Form C (SPDT) Relays; 5A / 24 VDC

The power supply expansion module, providing total current capacity
of up to 3 Amps with extensive remote diagnostics and supervision
features, including tamper protection, over-current protection, two
user programmable outputs and a dedicated siren driver.

Dimensions: 4.13” W x 2.6” H x 0.71” D

Operating Temperature: 14°F to 131°F (-10°C to 55°C)

Storage Temperature: -4°F to 140°F (-20°C to 60°C)

Main Panel

(105 mm x 66 mm x 18 mm)

WORKS WITH ALL VARIO PANELS

Main Panel

(105 mm x 66 mm x 18 mm)

n Please visit 2GIG.com, or contact your local Sales Manager.

© 2016 Nortek Security & Control LLC. All Rights Reserved

P/N 1 0013 9 50X 3

1950 Camino Vida Roble, Suite 150 • Carlsbad CA 92008 • 760.438.7000 • 760.800.421.1587

nortekcontrol.com