© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (February 2008)
Multi-Card Reader Pro
User Manual
English
LINDY No. 42982
www.lindy.com
For Home and Office Use
Tested to Comply with FCC
Standards
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (February 2008)
Introduction
Thank you for purchasing the LINDY Multi-Card Reader Pro! This
versatile card reader is compatible with the latest card types, including
SD High Capacity (SDHC), and with the smallest card types, such as
Micro SD and Memory Stick M2, without using any adapter. As well as
reading standard memory cards, the LINDY Multi-Card Reader Pro can
also be used to read, edit and back up contacts and messages from
your mobile phones SIM Card.
Features
Supports multiple card formats
6 different card slots
USB 2.0 transfer rate up to 480Mbps; backwards compatible with
USB 1.1
Integrated rotating USB connector
LED to indicate card access
Bus powered – no external power supply required
Includes SIM card editor software
Memory Card Reader compatible with Windows ME/2000/XP/Vista
and Mac OS 9.0 or higher
SIM Card Reader compatible with Windows 2000/XP/Vista
Dimensions: 68 x 41 x 14mm (WxDxH)
Package Contents
Multi-Card Reader Pro
USB 2.0 Extension Cable (approx 1m)
SIM Card Editor software
This User Guide
System Requirements
Pentium II 300MHz (or higher) with Windows ME/2000/XP/Vista or
Mac computer with OS 9.0 or higher
Available USB 2.0 or USB 1.1 port
CD ROM for driver installation (required for SIM Card Editor only)
Overview
Slot 1: CFI/CFII/CF 3.0/CF 4.0/Extreme III CF/Extreme CF/Ultra II
CF/HS CF/ XS-XS CF/CF Elite Pro/CF Pro/CF Pro II/IBM MD/HITACHI
MD/Magicstor MD
Slot 2: SD/Mini SD/HS Mini SD/Extreme SD/Extreme III SD/Ultra
SD/Ultra II SD/Ultra II SD Plus/SD-Ultra-X/Ultra Speed SD/SD
Pro/SDHC/SD Elite Pro/HS SD/MMC/MMC 4.0/MMC 4.2/HS MMC/HS
RS MMC/RS MMC/RS MMC 4.0/MMC Mobile/MMC Plus
Slot 3: xD
Slot 4: MS/MS Pro/MS Duo/MS Pro Duo/MS MG Pro/MS MG/MS MG
Duo/MS MG Pro Duo/Extreme MS Pro/MS Select/ Extreme III MS
Pro/Ultra II MS Pro/HS MS MG Pro/HS MS MG Pro Duo/HS MS Pro/HS
MS Pro Duo/MS ROM – M2
Slot 5: Micro SD, T-Flash
Slot 6: SIM Card
4
3
5
6
1
2
LED
Indicator
Rotating USB
Connector
Memory Card Reader Installation & Use
Installation is simply a matter of connecting the LINDY Multi-Card
Reader Pro to an available USB port, either using the rotating USB
connector directly, or in conjunction with the supplied USB extension
cable. Your computers OS will automatically detect the Card Reader
and provide its own driver.
Once installed, each slot will be shown as separate Removable Disk
drives:
SIM Card Editor Installation & Use
Before installing the SIM Card Editor software please complete the
Memory Card Installation.
1. Insert the SIM Card Editor CD in to your PCs CD-ROM Drive
2. The CD Will auto-run. Click SIM Card Editor to begin installation
3. Choose your installation language from the dropdown and click OK
4. Follow the on screen instructions
5. When you come to the “end user license agreement (EULA)” page,
read the agreement and press I Agree to accept the terms of the
agreement and continue
6. Choose the location for the installation and click Install
7. When the installation is completed, click Finish and the SIM Card
editor software will run.
8. For instructions on using the SIM Card Editor software, please refer
to the user manual on the supplied CD.
CE Statement
This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and it is
equipped with the CE mark. This unit has to be used with high quality shielded connection cables. Only if such high quality
shielded cables are used can you be sure that the EMC compatibility is not adversely influenced.
FCC Statement
Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and
ensure a suitably high level of immunity to electromagnetic disturbances.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must
enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please
follow your national law when you want to dispose of any electrical or electronic products.
More details can be obtained from your national WEEE recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und das Recycling von
Elektro- und Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung im Elektro- und Elektronikgerätegesetz –
ElektroG in deutsches Recht umgesetzt.
Dieses Gesetz verbietet vom 24.März 2006 an das Entsorgen von entsprechenden, auch alten, Elektro- und Elektronikgeräten
über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen Sammelstellen zugeführt werden!
Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernimmt die Gesamtheit der
Gerätehersteller.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (WEEE) pour le recyclage de tout équipement électrique et
électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation WEEE de manières légèrement
différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques ou électroniques de
votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici ed elettronici.
Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate.
Ogni stato membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del proprio
Stato quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
LINDY No. 42982
February 2008
www.lindy.com
Loading...