Lindy FireWire 800 User Manual

FireWire 800 3Ports PCI Host

1. Introduction

This FireWire800 3Ports PCI Host has IEEE P1394b / FireWire 800
2Ports and 1394a 1Port at PCI card to Transmit and Receive Data at 800/
400/ 200/ 100 Mbits/s. It provides a 32 bit 33 MHz and 64bit 33MHz PC I
interface on the host side.

Apple Mac OS X v10.2.4 or newer support Built-in 800Mbps driver for this
card. Mac OS 8.6 – Mac X v10.2.3 just support Built-in 400Mbps driver for
this card.

1.1. Features

1.1.1. PCI Interface

=

Compliant with PCI Specification, revision 2.2.

=

Integrated PCI DMA engines.

=

32 bit/33MHz and 64 bit/33MHz fully compliant PCI host interface.

1.1.2. IEEE 1394 ( FireWire 800 /400 /200 /1 00 )

o On Board Power connector to have Extra power input from system

power supply

o Supports data transfer rate up to 800 Mbps
o Fully supports Provisions of IEEE P1394b Revision 1.33+
o Fully Supports Provisions of IEEE 1394a-2000 and 1394-1995

Standard

o One External 1394a-2000 Fully Compliant Cable Port at S400, S200,

S100 speed

o Two Bilingual (9-pin) Cable Ports at S800 or S400b speed
o Supports Plug and Play

1.2. Package Contents

=

FireWire800 PCI card

=

Y-type Power Cable

=

- 1 -

This Users Manual

2. Installation

1. Power down the computer system.

2. Insert the PCI board into an available 32bit or 64bit PCI slot.

3. Connect Y-type Power cable to PCI board and System Power supply

4. Power up computer.

5. The applicable device driver will be installed automatically

2-64100-01A

- 2 -