Lindy Dual Rail Modular KVM Console Switch User Manual
Dual Rail Modular KVM Console
with 15 / 17 / 19”LCD Panel
User Manual English
For Installation into a 19” rack it is essential to precisely
follow the installation procedure as described in section
3.1. Install the Console into a Cabinet
of this manual.
Tested to comply with FCC Standards
For Commercial Use Only!
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH SECOND EDITION (JULY 2008)
Dual Rail Console For Modular KVM Switch User Guide
Packing List
The complete 15 / 17 / 19” dual rail console for modular KVM switch package consists of:
•
1U 19” rack mount console
•
Rail with front and rear bracket x 2
•
Blockers x 2
•
1.8 m KVM cable. (HDDB-15 / VGA + PS/2 x 2)
•
AC to DC power adapter
•
User Guide CD
•
Quick installation guide
•
Key x 2
•
Flat screws (length 6mm) x 6
•
Screws (to combine blockers and console) x 2
Please read this manual thoroughly, and follow the installation and operation procedures carefully
to prevent any damage to the product, and / or any of the devices that connect to it.
1
Dual Rail Console For Modular KVM Switch User Guide
Safety Instructions
Please read these safety instructions carefully.
Please keep this User’s Manual for later reference.
Please disconnect this equipment from the AC outlet before cleaning. Do not use liquid or
sprayed detergent for cleaning. Use a moist sheet or cloth for cleaning.
It is recommended that for your convenience the equipment is installed near an easily
accessible power socket.
Please keep this equipment in a non-humid environment.
Before starting the installation ensure that your equipment is situated on a stable, level
surface. A drop or fall could cause injury.
Do not leave this equipment in an unconditioned environment, storage temperatures above
60 0C or humidity may damage to the equipment.
The opening on the enclosure is for air convection, to prevent the equipment from
overheating. DO NOT COVER THE OPENING.
Ensure that the voltage of the power source you are connecting to the equipment matches
the supported input voltage.
Please keep the power cord in such a way that people can not step or trip on it. Do not place
anything over power cord. The power cord must be correctly rated for the voltage and current
marked on the product’s electrical ratings label. The voltage and current rating of the cord
should be greater than the voltage and the current rating marked on the product.
All cautions and warning on the equipment MUST be noted.
If the equipment is not in use for a long period, disconnect the equipment from the mains to
avoid being damaged by transient over-voltage.
Never pour any liquid into the ventilation openings; this could cause a fire or an electrical
shock.
Never open the equipment. For safety, ONLY qualified service personnel should open the
equipment.
If one of the following situations arises, get the equipment checked by service personnel.
•
The power cord or plug is damaged.
•
The equipment has been exposed to moisture.
•
The equipment has not worked well or you can not get it to work according to this
User Manual.
•
The equipment has been dropped or damaged.
•
If the equipment shows obvious signs or breakage.
2
Dual Rail Console For Modular KVM Switch User Guide
Index of Contents
Packing List ............................................................................................................... 1
Safety Instructions..................................................................................................... 2
Index of Contents ...................................................................................................... 3
1. General Information.............................................................................................. 4
1.1 Features....................................................................................................... 4
1.2 Benefits ........................................................................................................ 4
1.3 Product Specification ................................................................................... 5
1.3.1 15" Dual Rail Console with Modular KVM Switch Specification .........5
1.4.2 17" Dual Rail Console with Modular KVM Switch Specification .........6
1.4.3 19" Dual Rail Console with Modular KVM Switch Specification .........7
2. Panel Controls & OSD Function........................................................................... 8
2.1 Auto Tune..................................................................................................... 8
2.2 Input Source................................................................................................. 8
2.3 Brightness .................................................................................................... 9
2.4 Contrast........................................................................................................ 9
2.5 Colour........................................................................................................... 9
2.6 Position ...................................................................................................... 10
2.7 Language ................................................................................................... 10
2.8 Reset to Factory Settings........................................................................... 10
2.9 Power Indicator .......................................................................................... 10
3. Installation.......................................................................................................... 11
3.1 Install Console into Cabinet ....................................................................... 11
3.1.1 Notes......................................................................................………11
3.1.2 Hardware Kits Contents....................................................................11
3.1.3 Installing the Console .....................................................................112
3.2 Install Modular KVM Switch ....................................................................... 13
3.2.1 Hardware Kits Contents....................................................................13
3.2.2 Install Modular KVM Switch Step......................................................13
3.3 Installing the Video Card and Video Driver................................................ 15
3.3.1 Configuring the Display Settings.....................................................15
3.3.2 Connecting the Console..................................................................16
3.4 Turning the Console On........................................................................... 16
3.5 Testing the Console ................................................................................. 16
4. KVM Switch ........................................................................................................ 17
3
Dual Rail Console For Modular KVM Switch User Guide
1. General Information
The LINDY Dual Rail consoles offer an industrial level input solution to optimize your space
utilization by controlling your systems in just 1U. With the unique modular design, you can
easily integrate with more than 17 models of KVM switch, with different functions, and
expand up to 8 levels of KVM switch.
1.1. Features
•
Patented Dual Rail design for independent Panel and Keyboard drawer
•
Hidden handle for keyboard drawer
•
15, 17 & 19” LCD panel options
•
Support Sun native resolutions (17” & 19”)
•
Support 17 keyboard languages
•
Bright Active TFT display
•
OSD function for LCD display and KVM switch
•
Durable keyboard ( touchpad, cherry keyboard or optical trackball)
•
Panel protected by tempered glass
•
Integration with more than 17 models of KVM switch
•
DC power, DVI, USB, Touch panel (optional)
•
Sun keys (optional)
1.2. Benefits
Patented Dual Rail design:
The user can leave the LCD flip over, push back the keyboard drawer, and close the
cabinet door.
Hidden handle:
After pushing the keyboard drawer back, the handle of the keyboard drawer can also be
hidden and offer a flat surface for the cabinet.
Patented extension bracket:
With the patented extension bracket, the console body can extend 13cm. Even if there is
a large server handle or patch panel above the console it will still provide over 90
degrees of viewing angle.
Modular KVM switches:
You can use the console as a single port console, however due to it’s modular design is
is very easy to add 8 / 16 or even 32 port KVM consoles, with little time or effort.
4
Dual Rail Console For Modular KVM Switch User Guide
1.3. Product Specification
1.3.1. 15" Dual Rail Console with Modular KVM Switch Specification
Model name 15” dual rail console with modular KVM switch
Number of ports 1
Dimension 459.6 x 448.3 x 44 mm / 18.1 x 17.6 x 1.7 inches
Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches
Net Weight 12 Kg / 26.5 lbs
Gross Weight 19.5 Kg / 43.0 lbs
Display Size 15 inches
Panel Type Active Matrix TFT LCD
Resolution Capabilities Maximum Resolution up to 1024 x 768 (XGA)
Pixel Pitch Supports 0.297 mm x 0.297 mm
Viewing Angle (CR>10) Right-Left view 130°(Typ): Up-Down View 100°(Typ)
Contrast Ratio 400:1
Brightness White 250 cd/m2
Back Light Dual Lamps for Back Light
Supported Colors 16.7M Colors (8-bit with FRC)
Response Time Rising Time 5 ms, Decay Time 11 ms
Operating System
Multi Platform Support PS/2 and USB
System Cables VGA + PS/2 x 2 or VGA + USB x 1 cable
Keyboard Mouse 106 key PS/2 keyboard with touch pad
Sync 45 ~ 80 KHz
Power Source 100 ~ 240 VAC input
Power Consumption 16W, 10.41W for Panel
Temperature
Humidity 10% ~ 90% RH
Chassis Construction Heavy duty steel materials
Keyboard Language
Certification
15" Dual Rail Console with Modular KVM Switch Dimensions
Dos, Windows (3.1, 9x, 2000, NT4, ME, XP, 2003 Server) Linux, Novell
3.12-6, HP UX, SUN
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
USA, UK, German, French, Spanish, Italian, Portuguese, Dutch, Swiss,
Belgium, Swedish, Norwegian, Danish, Japan, Taiwan, Russian,
Hebrew
CE / FCC, UL / CUL / C-Tick, GOST
5
Loading...