Lindy CPU, CPU Multiscreen 32346, CPU Multiscreen 32347, CPU Multiscreen 32348, CPU Multiscreen 32349 Installation And Use Manual

Download

LINDY CPU Switch Multiscreen Range Installation and Use

CPU Switch Mul tiscreen - Installati on and Use First Edition (August 2001) Part Number s 32346, 32347, 32348 and 32349

Part Model

32346 LINDY CPU Switch Multiscreen 2 ports, 2 screens

Part Model

32347 LINDY CPU Switch Multiscreen 4 ports, 2 screens

Part Model

32348 LINDY CPU Switch Multiscreen 2 ports, 4 screens

Part Model

32349 LINDY CPU Switch Multiscreen 4 ports, 4 screens

LINDY CPU Switch Multiscreen ENGLISH

Quick Installation and Operation Guide

QUICK INSTALLATION

Power off all your computers and connect them to the computer ports (labelled 1

to 4) on the rear of the LINDY CPU Switch Multiscreen. LINDY 3-in-1 keyboard/video/mouse combination cables are recommended for the keyboard, mouse and first video connection. LINDY video cables are recommended for the additional vi deo connections.

Connect your keyboard, mouse and monitors to the WHITE ports on the rear of

the LINDY CPU Switch Multiscreen.

OPERATION GUIDE SUMMARY

The LINDY CPU Switch Multiscreen’s default configuration is suitable for most

systems.

A computer may be selected using the front panel key, a three button mouse or a

keyboard hotkey combination. To select a computer using the mouse press and release the left or right hand buttons whilst holding down the central mouse button. To select a computer using the keyboard hotkeys hold down the CTRL and ALT keys, press and release the required port key (e.g. 1) and then release the CTRL and ALT keys.

Safety information

For use in dry, oil free indoor environments only.

Do not attempt to service the LINDY CPU Switch Multiscreen yourself. Follow all warnings and instructions marked on the LINDY CPU Switch Multiscreen, its

optional power adapter and its accessories.

Warning - live parts contained within optional power adapter. No user serviceable parts within optional power adapter - do not dismantle. Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cord with the LINDY CPU Switch Multiscreen, make sure

the total ampere rating of the devices plugged into the extension cord does not exceed

the cord’s ampere rating. Also, make sure that the total ampere rating of all the devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

USA

A PDF version of this manual may be

downloaded from:

www.lindy.com

LINDY CPU Switch Multiscreen GERMAN

Kurzhandbuch, Einführung

FEATURES

Der LINDY CPU Switch Multiscreen unterstützt Monitorauflösungen bis

1900x1440 bis 75Hz sowie DDC Monitorerkennung. Der LINDY CPU Switch benöti gt bei Kabellängen unter 5m kein Netzteil. Werden gr öß ere Kabel längen benötigt, so sollte ein optional erhältliches Netzteil

verwendet werden; hiermit können in den meisten Fällen auch noch Kabell ängen

bis 20m realisiert werden. Der LINDY CPU Switch Multiscreen unterstützt Standard-Tastaturen und PS/2

Mäuse mit und ohne Rädchen wie z. B. die LINDY Dual Wheel Mause, LINDY

Dual Wheel Maus Wireless, Microsoft IntelliMouse u.a. . Über einen separat

erhältlichen RS-232 Mausadapter (LINDY Artikelnummer 70058) unterstützt er

auch serielle Mausanschlüsse am PC (Sub-D 25Pol Anschluss). Der LINDY CPU Switch kann mit einer optional erhältlichen Kabel-

Fernbedienung umgeschaltet werden. Der LINDY CPU Switch emuli ert für alle angeschlo ssenen Rechner permanent

Monitor, Maus und Tastatur. Dies sorgt dafür, dass zwischen den

angeschlossenen Rechnern beliebig oft hin und her geschaltet werden kann,

ohne dass die Rechner das Maus- bzw. Tastatursignal verlieren und neu

gebootet werden müssen. Der LINDY CPU Switch Multiscreen verfügt über einen Passwortschutz gegen

ungewollten Zugriff sowie über einen Bildschir mschoner – siehe ggf.

ausführliches Handbuch. Zwischen den angeschlossenen Computern kann entweder per Tastatur-Hotkey,

durch Drücken der Umschalttaste auf der Frontblende oder mit einer 3-Tasten-

Maus umgeschaltet werden.

Um einen Computer per Tastatur-Hotkey auszuwählen werden die <Strg> und

<ALT> Tasten zusammen gedrückt und dann zusätzlich die erforderliche Port-

Taste gedrückt (z.B. 1 oder 2 beim 2 Port Switch bzw. 1, 2, 3 oder 4 beim 4 Port

Switch). Diese Hotkeys können bei Bedarf auch auf andere Tastenkombinationen

umgestellt werden.

Zur Auswahl eines Computers mit der 3-Tasten-Maus werden gleichzeitig erst die

mittlere und dann zusätzlich die linke oder rechte Maustaste kurz gedrückt.

Komplette Handbuchversion ist herunterladbar von:

www.lindy.com

LINDY CPU Switch Multiscreen GERMAN

SPEZIELLE EIGENSCHAFTEN

Der LINDY CPU Switch Multiscreen ist Flash-uprgradable. Die Firmware ist damit

an zukünftige neue Hardware prinzipiell anpassbar.

Der LINDY CPU Switch kann kaskadiert werden. Der LINDY CPU Switch Multiscreen hat ein robustes Metallgehäuse für hohe

Stabilität und optimale EMV Abschirmung. Der LINDY CPU Switch Multiscreen unterstützt sowohl Desktop, Tower als auch

Notebook PCs, RS6000, DEC Alpha und Silicon Graphics Workstations.

INSTALLATION

Schalten Sie alle Ihre Computer aus und schließen Sie sie an die HELLGRÜN

markierten Ports auf der Rückseite des LINDY CPU Switch Multiscreen an. Wir

empfehlen der Übersichtlichkeit halber die Verwendung der LINDY 3-in-1-

Tastatur/Monitor/Mauskabel. Es können jedoch auch geeignete einzelne LINDY

Standardkabel verwendet werden.

Schließen Sie Ihre Tastatur, Ihren Monitor und Ihre PS/2-Maus an die

DUNKELGRÜN markierten Ports auf der Rückseite des LINDY CPU Switch

Multiscreen an.

Die Vorgabeeinstellungen (Li eferzustand) des LINDY CPU Switch Multiscreen

sind für die meisten Installationen geeignet (Änderungen siehe Ausführliches

englisches Manual).

SICHERHEITSHINWEISE

Nur für den Gebrauch innerhalb von trockenen, ölfreien Räumen vorgesehen. Die Wartung des LINDY CPU Switch Multiscreen darf nur ausschließlich von

dazu qualifiziertem Fachpersonal vorgenommen werden.

Sämtliche Warnhinweise und Anweisungen auf dem LINDY CPU Switch

Multiscreen, seinem optionalen Netzteil und Zubehörteilen sind zu beachten und zu befolgen.

Warnung – im Netzteil sind unter Spannung stehende Teile enthalten. Das

Netzteil darf nicht geöffnet werden und soll bei Defekt nur durch einen vom Hersteller zugelassenen Typ ersetzt werden.

LINDY CPU Switch Multiscreen SPANISH

Guía rápida de instalación y funcionamiento

INSTALACIÓN RÁPIDA

Desconecte todos los ordenadores y conéctelos a los puertos VERDE CLARO en la

parte posterior del LINDY CPU Switch Multiscreen. Para mayor comodidad se

recomiendan cables combinados 3-en-1 teclado/vídeo/ratón. También están

ampliamente disponibles cables individuales normales adecuados para el teclado, el

vídeo y el ratón.

Conecte el teclado, el monitor y el ratón al puerto VERDE OSCURO en la parte

posterior del LINDY CPU Switch Multiscreen.

RESUMEN DE LA GUÍA DE FUNCIONAMIENTO

La configuración por defecto del LINDY CPU Switch Multiscreen es adecuada para la

mayoría de los sistemas.

Puede seleccionarse un ordenador utilizando la tecla del panel frontal, un ratón de tres

botones o una combinación de teclas rápidas en el teclado. Para seleccionar un

ordenador utilizando el ratón, pulse y suelte los botones izquierdo o derecho mientras

mantiene pulsado el botón del medio. Para seleccionar un ordenador utilizando las

teclas rápidas del teclado, mantenga pulsadas las teclas CTRL y ALT, pulse y suelte la

tecla del puerto requerida (p.e. 1) y a continuación suelte las teclas CTRL y ALT.

Información sobre seguridad

Solamente debe usarse en interiores, en entornos secos y sin grasa.

No intente realizar ningún tipo de mantenimiento al LINDY CPU Switch Multiscreen

usted mismo.

Siga todos los avisos e instrucciones marcadas en el LINDY CPU Switch Multiscreen, el

adaptador de potencia opcional y todos sus accesorios.

Aviso – el adaptador de potencia opcional tiene piezas con tensión. El adaptador de potencia opcional no contiene piezas que pueda mantener el usuario –

no desmontarlo.

Cambie el adaptador de potencia opcional solamente con un tipo aprobado por el

fabricante.

Si utiliza una cable de extensión con el LINDY CPU Switch Multiscreen, compruebe que

el amperaje nominal total de los equipos enchufados en el cable de extensión no

superen el amperaje nominal del cable de extensión. Asimismo, compruebe que el

amperaje nominal total de todos los equipos conectados a la toma de red no superen el

amperaje nominal de la toma.

LINDY CPU Switch Multiscreen FRENCH

Guide d’installation rapide et mode d’emploi

INSTALLATION RAPIDE

Mettez tous vos ordinateurs hors tension et raccordez-les aux ports VERT CLAIR

à l'arrière du LINDY CPU Switch Multiscreen. Les câbles clavier/vidéo/souris

LINDY 3-in-1 sont recommandés pour des raisons pratiques. Des câbles clavier,

vidéo et souris standard se trouvent également facilement sur le marché.

Raccordez votre clavier, moniteur et souris au port VERT FONCE à l'arrière du

LINDY CPU Switch Multiscreen.

MODE D’EMPLOI SOMMAIRE

La configuration par défaut du LINDY CPU Switch Multiscreen convient à la

plupart des systèmes.

Pour sélectionner un ordinateur, utilisez la touche du panneau avant, une souris

à trois boutons ou une combinaison de touches de raccourci clavie r. Pour

sélectionner un ordinateur à l'aide de la souris, maintenez la pression sur le

bouton central et appuyez sur le bouton gauche ou droite avant de rel âcher. Pour

sélectionner un ordinateur avec les touches de raccourci clavier, maintenez les

touches CTRL et ALT enfoncées, appuyez sur la touche du port souhaité (ex. 1)

et relâchez, puis relâchez les touches CTRL et ALT.

Consignes de sécurité

A n'utiliser qu'à l'in térieur, dans un environnement sec et exempt d'huile.

Ne pas assurer soi-même l'entretien du LINDY CPU Switch Multiscreen. Observer tous les avertissements et instructions marqués sur le LINDY CPU Switch

Multiscreen, son adaptateur de courant optionnel et ses accessoires. Avertissement – l'adaptateur de courant optionnel renferme des pièces sous tension. L'adaptateur de courant optionnel ne contient aucune pièce devant être révisée par

l'utilisateur – ne pas le démonter. Ne remplacer l'adaptateur de courant optionnel que par un adaptateur approuvé par le

fabricant. Lorsqu'une rallonge est utilisée pour le LINDY CPU Switch Multiscreen, vérifier que

l'intensité nominale totale des périphériques branchés sur la rallonge ne dépasse pas l'intensité nominale du câble. Par ailleurs, vérifier que l'intensité nominale totale de tous les périphériques branchés sur la prise murale ne dépasse pas l'intensité nominale de la prise murale elle-même.

Téléchargez cette version de ce manuel :

www.lindy.com

LINDY CPU Switch Multiscreen ITALIAN

Guida di installazione rapida e funzionamento

INSTALLAZIONE RAPIDA

Spegnere tutti i computer e collegarli alle porte VERDE CHIARO sul retro del

LINDY CPU Switch Multiscreen. Per facilità consigliamo i cavi LINDY combinati 3in-1 tastiera/video/mouse. Sono pure disponibili cavi mouse, video e tastiera standard individual i adatti.

Collegare la tastiera, monitor e mouse alla porta VERDE SCURO sul retro del

LINDY CPU Switch Multiscreen.

SOMMARIO GUIDA OPERATIVA

La configurazione di default del LINDY CPU Switch Multiscreen è adatta al la

maggior parte dei sistemi.

Si può selezionare un computer usando il tasto sul pannell o frontale, un mouse a

tre bottoni o una tastiera con tasti atti vi. Per selezionare un computer con il mouse, premere e rilasciare i bottoni sinistro o destro trattenendo contemporaneamente quello centrale. Per selezionare un computer con tasti attivi tastiera, tener premuti i tasti CTRL e ALT, premere e rilasciare il tasto porta richiesta (es. 1) e quindi rilasciare i tasti CTRL e ALT.

Informazionoi riguardanti la sicurezza

Da usare esclusivamente in interni asciutti e privi di olio.

Non cercare di effettuare manutenzione sul LINDY CPU Switch Multiscreen. Seguire tutti gli avvertimenti ed istruzioni presenti sul LINDY CPU Switch Multiscreen,

sull’adattatore opzionale di potenza e sugli accessori.

Attenzione – l’adattatore opzionale di potenza contiene parti sotto tensione. L’adattatore opzionale di potenza non contiene parti soggette a manutenzione da parte

dell’utente – non smontarlo. Sostituire l’adattatore opzionale di potenza solo con uno di tipo approvato dal

produttore. Se si usa una prolunga con il LINDY CPU Switch Multiscreen, controllare che la potenza

nominale totale in ampère dei dispositivi collegati alla prolunga non superi la potenza nominale in ampère della prolunga stessa. Controllare inoltre che la potenza nominale totale in ampère dei dispositivi collegati non superi la potenza nominale in ampère della presa a muro.

LINDY CPU Switch Multiscreen Installation and Use Page 1

About this manual

Part No. LY0041/1 www.lindy.com

Part No. 32346 LINDY CPU Switch Multiscreen 2 Port 2 Screen Part No. 32347 LINDY CPU Switch Multiscreen 4 Port 2 Screen Part No. 32348 LINDY CPU Switch Multiscreen 2 Port 4 Screen Part No. 32349 LINDY CPU Switch Multiscreen 4 Port 4 Screen

All rights reserved. Whilst every precaution has been taken in the preparation of this manual, LINDY Electronics Ltd assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. We reserve the right to change the specifications, functions and circuitry of the product without notice. All trademarks acknowledged.

Safety information

For use in dry, oil free i ndoor environments only.

Do not attempt to service the LINDY CPU Switch Multiscreen yourself.

Follow all warnings and instructions marked on the LINDY CPU Switch

Multiscreen, its optional power adapter and its accessories.

Warning - live parts contained within optional power adapter.

No user serviceable parts within optional power adapter - do not dismantle.

Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cord with the LINDY CPU Switch Multiscreen, make

sure the total ampere rating of the devices plugged into the extension cord does

not exceed the cord’s ampere rating. Also, make sure that the total ampere rating

of all the devices plugged into the wall outlet does not exceed the wall outlet’s

ampere rating.

LINDY CPU Switch Multiscreen Installation and Use Page 2

Warranty

LINDY Electronics Ltd warrants that this product shall be free from defects in workmanship and materials for a period of one year from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, LINDY will replace or repair it free of charge. No liability can be accepted for damage due to misuse or circumstances outside LINDY’s control. Also LINDY will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. LINDY’s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product.

If any difficulty is experienced in the installation or use of this product that you are unable to resolve, please contact your supplier.

Trademarks

All trademarks mentioned in this manual are acknowledged to be the property of the respective trademark owners.

LINDY is a registered trademark of LINDY Electronics Limited.

Compaq is a registered trademark of Compaq Computer Corporation.

Hewlett-Packard is a registered trademark of Hewlett-Packard.

IBM, PC/AT, PS/2, RS/6000 and ThinkPad are registered trademarks of International Business Machines Corporation.

Logitech, MouseMan+ and Pilot Mouse+ are trademarks of Logitech Inc.

Microsoft and Windows are registered trademarks, and IntelliMouse is a trademark of Microsoft Corporation.

Velcro is a trademark of Velcro USA Inc.

LINDY CPU Switch Multiscreen Installation and Use Page 3

Radio Frequency Energy

Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

European E M C directive 89/336/EEC This equipment has been tested and found to comply with the li mits for a class B computing device in accordanc e with the specifications in the European standard EN55022. These lim its are designed to provide reasonable pr otection against harmful interf er enc e. This equipment generates, uses and can radiate radio frequenc y energy and if not instal led and used in accordance with the instructions may cause harmful int er ference to r adio or tel evi si on reception. However, ther e is no guarantee that harmful interference will not occur in a particular install ation. If thi s equi pment does cause interference to radio or televisi on reception, which can be determ ined by turni ng the equipment on and off , the user is encouraged to correct the interference with one or more of the following measures: (a) Reor ient or rel oc ate the receiving antenna. (b) Increase the separat ion between the equipment and the receiver. ( c ) Connect the equipment to an out let on a cir c uit different from that to which the r ec eiv er is connected. (d) Consul t the supplier or an experienc ed r adio / TV t ec hnician for help.

FCC Compliance Statement ( United Stat es) This equipment generates, uses and can radiate radio f r equenc y ener gy and if not install ed and used properly, that is, in strict accor danc e with the manufacturer’s instruc tions, m ay c ause interference to radio communication. It has been tested and found t o c omply wit h the limits for a class A computing dev ice in accordance with the specif ications i n S ubpar t J of part 15 of FCC rules, which are designed to provide reasonable protecti on against such interference when the equipment is operated in a commercial environment. Operati on of thi s equi pment in a residential area may cause i nterfer enc e, in which case the user at his own expense will be required to t ak e whatever measures may be necessary to correct t he interference. Changes or modifications not expr essly appr oved by t he manuf ac turer could void the user’s authority t o operate the equipment.

Canadian Department of Communications RFI statement

This equipment does not exceed the class A limits f or r adio noise emissions from digital apparatus set out in the r adio interference regulati ons of the Canadian Department of Communications.

Le présent appareil numérique n’ém et pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur l e brouillage radioélectriques publié par le ministère des Communicat ions du Canada.

LINDY CPU Switch Multiscreen Installation and Use Page 4

Contents

1. Introduction .................................................................................... 6

1.1 Key features........................................................................................... 6

1.2 Package contents.................................................................................. 8

1.3 Remote controller contents.................................................................... 8

1.4 Product information ............................................................................... 9

2. Installation ...................................................................................... 12

2.1 What you will need ............................................................................... 12

2.2 Mounting the LINDY CPU Switch Multiscreen ...................................... 13

2.3 Connecting your devices ......................................................................13

2.4 ‘Interface powered' operation without the optional power adapter ........ 14

2.5 Configuring your PCs ............................................................................ 14

2.6 Configuring the LINDY CPU Switch Multiscreen .................................. 14

2.7 Summary of LINDY CPU Switch Multiscreen confi guration options ...... 15

2.8 Resetting the LINDY CPU Switch Multiscreen without disconnecting

your devices .......................................................................................... 17

2.9 Other useful installation information ..................................................... 18

2.10 Re-enabling a disconnected PS/2 mouse ........................................... 19

2.11 Hot plugging the LINDY CPU Switch Multiscreen into running systems

and re-enabling disconnected PS/2 CPU mouse connections ........... 19

2.12 Upgrading the LINDY flash memory ................................................... 20

LINDY CPU Switch Multiscreen Installation and Use Page 5

3. Using the LINDY CPU Switch Multiscreen .................................. 24

3.1 Power on status..................................................................................... 24

3.2 Front panel keys and remote controller................................................. 24

3.3 Status display ........................................................................................ 25

3.4 Switching operation ............................................................................... 26

3.5 Keyboard hotkey control........................................................................ 26

3.6 Mouse control........................................................................................ 27

3.7 RS232 control........................................................................................ 28

3.8 Cascading LINDY CPU Switch Multiscreens ........................................ 28

3.9 Synchronising LINDY CPU Switch Multiscreens for multiple video

head applications .................................................................................. 31

4. LINDY CPU Switch Multiscreen configuration options.............. 33

4.1 Screen saver time delay ....................................................................... 33

4.2 Autoscan lock on mode and delay time ................................................ 33

4.3 Mouse mode and mouse switching of channels .................................... 34

4.4 Keyboard hotkey combination ............................................................... 35

4.5 Cycling between all channels or just the active channel s ..................... 36

4.6 Firmware functions (version query, mouse restore and reset) ..............36

4.7 Setting a security password .................................................................. 37

4.8 Cascade query code ............................................................................. 38

4.9 Resolving slow mouse problems .......................................................... 38

4.10 Exit configure mode ............................................................................ 39

Appendices

A - Cable and connector specifications................................................................ 40

B - Problem solving.............................................................................................. 45

LINDY CPU Switch Multiscreen Installation and Use Page 6

1. Introduction

Thank you for purchasing the LINDY CPU Switch Multiscreen. Your LINDY CPU Switch Multiscreen is a high performance Keyboard, Video monitor and Mouse (KVM) sharing device which supports a wide range of PC hardware and software platforms. The Multiscreen is a new concept in KVM switches and enables you to benefit from all the convenience of the proven LINDY CPU Switches whilst taking advantage of the multiple monitor facilities available on many modern computers.

Computers fitted with multiple vi deo cards are becoming more common as operating systems have developed to make use of the extended video "real estate" offered by multiple monitors. The increased display area enables more information to be presented to the user without reducing the resolution. The Multiscreen enabl es several computers equipped with these multiple video facilities to be controlled from a keyboard, mouse and an array of monitors. All the monitors and the keyboard and mouse are switched together from one computer to the next giving you full control of the wider picture.

1.1 Key features

Control several multi-video enabled PCs with from a single keyboard, mouse and

a bank of monitors. Dual and quad video head models available with two or four computer ports. Two or more Multiscreens may be synchronously switched by linking their options

ports. Switch 4,8,12 or 16 monitors together by synchronising Multi screens. Excellent for banking, security and engineering applications. Supports high bandwidth monitors at resolutions up to 1920 x 1440 with an

excellent video transfer characteristic - hi gh bandwidth and low distortion. Continuous keyboard and mouse emulation on all ports ensures problem free

computer bootup. Interface powered operation – LINDY CPU Switch Multiscreen draws its power

from the connected computers for maximum convenience.

LINDY CPU Switch Multiscreen Installation and Use Page 7

Intelligent switching feature enables users to switch between all ports or just the

active ports. Mixed AT/PS2 keyboards and PS2/RS232 mice supported as standard. Flash upgradeable - LINDY CPU Switch Multiscreen’s firmware may be upgraded

by connecting a computer’s serial port and running a download program. Can be cascaded to provide a video switching network. Video channels support Display Data Channel (DDC/DDC1/DDC2) signalling. Password security prevents unauthorised use. User options stored in EEPROM memory. Optional remote control module for convenient operation. Channel switching by front panel key, keyboard hotkey, or 3 button mouse. Automatically restores keyboard and mouse states when channel changed. Supports keyboard modes 1,2 and 3 and mouse prompt and stream modes for

maximum compatibility. Can be controlled remotely via an RS232 serial port. Includes screen saver, auto-scan and variable hotkey opti ons. Supports Microsoft IntelliMouse, IntelliMouse Explorer and other common wheel

mice. Mouse restoration functions to enable ‘hot plugging ’ of cer tain systems. Keyboard, mouse and LINDY CPU Switch Multiscreen resets may be performed

without disconnecting devices. Supports IBM ThinkPad ‘Y’ cables. Power and activity indication confir m correct operation. Standard cable connections make installation easy and inexpensive. All ports are active simultaneously – all PCs may all be booted at the same time. Robust metal case ensures good shielding and video quality.

Supports desktop and laptop PCs, RS6000s, DEC Alphas, and Silicon Graphics

computers .

LINDY CPU Switch Multiscreen Installation and Use Page 8

Supports very wide range of software including Windows 3.X, WFWG, 95, 98,

2000, NT,ME, XP, DOS, Unix, Linux, NetWare, OS/2, BSD etc. Supports the additional shortcut, web access and media control keys found on

extended keyboards. May be connected to LINDY CPU Switch Smart products for synchronised

switching applications. Optional power adapter can be used for ‘video only’ or cascade applications.

1.2 Package contents

LINDY CPU Switch Multiscreen. This installation guide.

(Please note that a power adapter is NOT required for most applications and so is not included. This may be purchased separately if required).

1.3 Remote controller contents (part code: 32255)

Remote control module.

Velcro strip for mounting remote controller.

LINDY CPU Switch Multiscreen Installation and Use Page 9

1.4 Product information

Figure 1 - LINDY CPU Switch Multiscreen front view

Figure 2a - CPU Switch Multiscreen 4 Port 4 Screen (part code: 32349)

LINDY CPU Switch Multiscreen Installation and Use Page 10

Figure 2b - CPU Switch Multiscreen 4 Port 2 Screen (part code: 32347)

Figure 2c - CPU Switch Multiscreen 2 Port 4 Screen (part code: 32348)

LINDY CPU Switch Multiscreen Installation and Use Page 11

Figure 2d - CPU Switch Multiscreen 2 Port 2 Screen (part code: 32346)

Figure 3 - Remote control pad / display (optional accessory - part 32255)

LINDY CPU Switch Multiscreen Installation and Use Page 12

2. Installation

2.1 What you will need

Cables to connect the LINDY CPU Switch Multiscreen to each of your PC

keyboard, video and mouse ports. Cable specifications are given in appendix A. For convenience we suggest that you connect your keyboard, mouse and first video port using a LINDY 3-in-1 combination cable. Additional video ports may then be connected using video-only cabl es.

Monitors with standard VGA/SVGA (15 pin) connector that will work when

connected directly to each of your PCs. LINDY CPU Switch Multiscreen supports low and high resolution monitors.

A standard AT or PS/2 style keyboard. If you are using an AT keyboard with a 5

pin connector you may connect this to the LINDY CPU Switch Multiscreen using a standard AT to PS/2 keyboard adapter.

A PS/2 style two or three button Microsoft or Logitech compatible mouse or a

Microsoft IntelliMouse / IntelliMouse Explorer compatible mouse. If you wish to use the mouse to switch the LINDY CPU Switch Multiscreen’s channel then you will need a three button mouse or an IntelliMouse.

(The LINDY CPU Switch Multiscreen supports ‘Internet Mice’ that are compatible

with the Microsoft IntelliMouse. These are fitted with a wheel or other scroll control and sometimes have additional buttons. Examples are: Microsoft IntelliMouse, Logitech Pilot Mouse+, Logitech MouseMan+, Genius NetMouse and Genius NetMouse Pro.)

A suitable mouse driver for your PCs. Supported types are:

- PS/2 or RS232 two button mouse driver (any manufacturer).

- Microsoft mouse driver (including IntelliMouse).

- Logitech mouse driver (including two button, three button and wheel mouse).

Use of PS/2 and RS232 style mice with the LINDY CPU Switch Multiscreen - All of the mouse connections from LINDY CPU Switch Multiscreen to PCs support either a PS/2 or an RS232 mouse. LINDY CPU Switch Multiscreen automatically converts from the PS/2 mouse commands to RS232 serial mouse commands. Serial mice types are selected by using an adapter as described in Appendix A. The

LINDY CPU Switch Multiscreen Installation and Use Page 13

LINDY CPU Switch Multiscreen will operate without a mouse connected if you do not wish to use one.

2.2 Mounting the LINDY CPU Switch Multiscreen

The LINDY CPU Switch Multiscreen has been designed for use on a desktop or shelf in close proximity to the user’s monitor and peripherals. The optional remote controller may be used if you wish to locate the LINDY CPU Switch Multiscreen on a desk or shelf that is some distance from the monitor and peripherals.

2.3 Connecting your devices

Ensure that the optional power adapter is disconnected from the LINDY CPU Switch Multiscreen and that all the devices which are to be attached are switched off. Connect the shared keyboard, PS/2 mouse and monitors to the connectors at the rear of the LINDY CPU Switch Multiscreen (see figs 1, 2 and 3). Next, connect each computer system unit in turn with the keyboard cable, mouse cable and video cables. For the keyboard, mouse and first video port, LINDY 3-in-1 keyboard/video/mouse cables are recommended for maximum convenience. Any unused computer connections can be left unconnected. To connect computers with serial mouse connections and AT style keyboard connections use the adapters specified in appendix A. If you have an existing 6-pin mini-DIN to 9-pin serial adapter that came with a mouse it may not be suitable for use with the LINDY as there are several different standard wiring configurati ons for these adapters.

The LINDY CPU Switch Multiscreen is now ready for use and will start to operate as soon as one of the attached PCs is powered on. If you are connecting to PCs using cables that are longer than 5 metres or are cascading the LINDY CPU Switch Multiscreen to another LINDY CPU Switch Multiscreen you will need to use the

LINDY CPU Switch Multiscreen Installation and Use Page 14

optional power adapter. When using the optional power adapter, ensure that it is connected to the mains and powering the LINDY CPU Switch Multiscreen before you switch on the connected computers. Failure to switch the LINDY CPU Switch Multiscreen and computers on in the correct order can lead to the mouse and/or keyboard not being recognised by the computers when they are switched on.

2.4 ‘Interface powered’ operation without the optional power adapter

The LINDY CPU Switch Multiscreen draws its power from the connected computers via the keyboard cables. A single keyboard connection is normally sufficient to power the LINDY CPU Switch Multiscreen provided that the cable is no longer than 5 metres. If more than one computer is connected then the power will be intelligently drawn from all computers. Cables longer than 5 metres may be used provided that the LINDY CPU Switch Multiscreen is already powered by another connected computer or the optional power adapter. If you are cascading the LINDY CPU Switch Multiscreen to another LINDY CPU Switch Multiscreen then a power adapter must be connected to all LINDY CPU Switch Multiscreens.

2.5 Configuring your PCs

Configure your PC in the same way that you would if your keyboard, mouse and monitor were all connected directly to your PC. LINDY CPU Switch Multiscreen emulates Microsoft compatible serial, IntelliMouse, IntelliMouse Explorer and PS/2 mice, so ensure that your PC software is configured for a Microsoft mouse of the correct type. Refer to the list of supported drivers in section 2.1.

2.6 Configuring the LINDY CPU Switch Multiscreen

The LINDY CPU Switch Multiscreen is supplied pre-configured with factory defaults which are suitable for most applications. There are a number of more advanced options which can be set by the user. These are stored in the LINDY CPU Switch Multiscreen’s EEPROM memory and are retained when the power is disconnected.

The options may be changed whilst the LINDY CPU Switch Multiscreen is in configure mode. You may enter configure mode at initial power on or whilst the LINDY CPU Switch Multiscreen is running:

LINDY CPU Switch Multiscreen Installation and Use Page 15

To enter configure mode at power on:

Switch off all the attached PCs and the LINDY CPU Switch Multiscreen. Hold down the front panel key whilst powering on the LINDY CPU Switch Multiscreen. Remember that the LINDY CPU Switch Multiscreen draws its power from any attached PC via the keyboard cable and so will power itself on when the attached PC is switched on or when the optional power adapter is connected. Do not release the key until the LINDY CPU Switch Multiscreen displays ’C’ to show that it has entered configure mode.

To enter configure mode whils t the LINDY CPU Switch Mult iscreen is running:

Hold down the front panel key for 5 seconds until the front panel display shows ‘C’.

In configure mode, options are entered by typing a letter followed by a number followed by (return). Use ESC to abort the entry of an option. The LINDY CPU Switch Multiscreen will remain in configure mode until you type 'E' (return).

For example: to set hotkey option 2 type the following at the 'C' prompt

(at LINDY CPU Switch Multiscreen 'C' prompt) +

To exit configure mode type: (

2.7 Summary of LINDY CPU Switch Multiscreen configuration options

Full details of each of the configuration options and their uses are given in section 4.

B1 - screen saver disabled (default) B2 - Blank screen after 1 minute of inactivity B3 - Blank screen after 2 minutes of inactivity B4 - Blank screen after 4 minutes of inactivity B5 - Blank screen after 8 minutes of inactivity B6 - Blank screen after 12 minutes of inactivity B7 - Blank screen after 16 minutes of inactivity B8 - Blank screen after 20 minutes of inactivity

LINDY CPU Switch Multiscreen Installation and Use Page 16

L1 - CPU Switch Multiscreen locks on to active ports only during autoscanni ng

(default)

L2 - CPU Switch Multiscreen locks on to every port during autoscanning L3 - CPU Switch powers on in autoscan mode and locks on to active ports only L4 - CPU Switch Multiscreen powers on in autoscan mode and locks on to all ports

L5 – Allow the mouse to run at any speed (default) L6 – Don't allow the mouse to run at very slow speeds

L7 - Cascade query code = AD (default) L8 - Cascade query code = EF

T1 - 2 seconds autoscan delay time before switching to next port (default) T2 - 5 seconds autoscan delay time before switching to next port T3 - 7 seconds autoscan delay time before switching to next port T4 - 10 seconds autoscan delay time before switching to next port T5 - 15 seconds autoscan delay time before switching to next port T6 - 20 seconds autoscan delay time before switching to next port T7 - 30 seconds autoscan delay time before switching to next port T8 - 60 seconds autoscan delay time before switching to next port

U1 - LINDY CPU Switch Multiscreen channels are switchable using a 3 button

mouse or IntelliMouse (default) (LINDY CPU Switch Multiscreen reports 2 button mouse mode to PCs) U2 - LINDY CPU Switch Multiscreen channels are not switchable usi ng 3 button mouse or IntelliMouse (LINDY CPU Switch Multiscreen reports 2 button mouse mode to PCs) U3 - LINDY CPU Switch Multiscreen channels are not switchable usi ng 3 button mouse or IntelliMouse (LINDY CPU Switch Multiscreen reports 3 button mouse mode to PCs) U4 - LINDY CPU Switch Multiscreen channels are switchable usi ng 3 button mouse or IntelliMouse (LINDY CPU Switch Multiscreen reports IntelliMouse mode to PCs) U5 - LINDY CPU Switch Multiscreen channels are not switchable usi ng 3 button mouse or IntelliMouse (LINDY CPU Switch Multiscreen reports IntelliMouse mode to PCs)

LINDY CPU Switch Multiscreen Installation and Use Page 17

U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button

mouse (default)

U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three

button mouse

H1 - Hotkey combination is CTRL + ALT + command key (default) H2 - Hotkey combination is CTRL + SHIFT + command key H3 - Hotkey combination is ALT + SHIFT + command key H4 - Hotkey combination is RIGHT ALT + command key H5 - Hotkey combination is LEFT ALT + RIGHT ALT + command key H6 - Hotkey combination is LEFT CTRL + LEFT ALT + command key H7 - Hotkey combination is RIGHT CTRL + RIGHT ALT + command key H8 - No hotkey combination enabled

F1 - Display firmware first digit (Note: F1 is ) followed by  NOT O) F2 - Display firmware second digit F3 - Display firmware third digit F5 - Restore PS/2 mouse function F6 - Restore IntelliMouse function F8 - RESET all configura tions to defau lt settings. (Display con firms with 'r').

P - Sets password - see section 4.6 for instructions.

E - Exits configure mode and returns the LINDY CPU Switch Multiscreen to normal

operation mode.

2.8 Resetting the LINDY CPU Switch Multiscreen without disconnecting your devices

The LINDY CPU Switch Multiscreen draws its power from the connected computers and therefore may only be fully powered down when all the connected computers have been switched off or disconnected. However, the LINDY CPU Switch Multiscreen may be reset without disconnecting or powering down your computers by using the reset switch on the underside of the unit. Performing a reset using this switch performs a complete hardware reset on the LINDY CPU Switch Multiscreen and is equivalent to switching off the power. To perform a hardware reset, move option switch 8 to the ON position (halt and reset) and then back to the OFF position (normal operation).

LINDY CPU Switch Multiscreen Installation and Use Page 18

2.9 Other useful installation information

PC boot up sequence - When your PCs are powered on they communicate with

any attached keyboards and mice and setup parameters required by the particular operating system. It is necessary for the LINDY CPU Switch Multiscreen to be attached and powered on during this sequence so that it can give the required responses and keep track of all the modes and settings requested by each of the connected PCs.

Mouse characteristics - do not unplug a PS/2 mouse connection from a PC whilst the PC is on. Due to the design of PS/2 mice communications the mouse function on the PC will be lost and you will have to re-boot the PC to regain normal operation. Unplugging the mouse from the LINDY CPU Switch Multiscreen will also cause it to stop operating when it is plugged back in. RS232 mice can usually be unplugged and plugged back in provided that a mouse was connected when the operating system initially booted. The LINDY CPU Switch Multiscreen is fitted with a PS/2 mouse recovery system which allows you to disconnect and re-connect the shared mouse without powering down the system (although this is generally not advisable) see section 2.10 for details.

Keyboard and mouse mode switching - The LINDY CPU Switch Multiscreen keeps a log of the keyboard and mouse mode and resolution settings requested by each of the connected PCs. These settings are automatically restored to the shared keyboard and mouse when the LINDY CPU Switch Multiscreen channel is switched thus ensuring maximum software compatibility. The keyboard num, caps and scroll lock states are an obvious example of this process.

2.10 Re-enabling a disconnected PS/2 mouse

If you disconnect the shared PS/2 mouse from the LINDY CPU Switch Multiscreen by accident during operation then the mouse operation will be lost when the mouse is plugged back in. To avoid having to reboot the entire system in this situati on the LINDY CPU Switch Multiscreen is fitted with an automatic mouse recovery system.

With the PS/2 mouse disconnected, change the channel using the keypad or keyboard hotkeys. The LINDY CPU Switch Multiscreen detects that the mouse has been disconnected and triggers the automatic recovery system. Plug in the PS/2 mouse and the LINDY CPU Switch Multiscreen will re-initialise it.

Alternatively you can reset the keyboards and mice by holding down the front panel

LINDY CPU Switch Multiscreen Installation and Use Page 19

key for 5 seconds. When the character ‘C’ is displayed on the front of the LINDY CPU Switch Multiscreen, press the front panel key again. A complete power off reset of the connected keyboards and mice will then be performed. This function only resets the shared keyboard and mice that are plugged into the control port. It does not affect the status of any of the other ports on the switch or the CPU connections.

2.11 Hot plugging the LINDY CPU Switch Multiscreen into running systems and re-enabling disconnected CPU PS/2 mouse connections

It is advisable to switch off the systems that are going to be connected to the LINDY CPU Switch Multiscreen before installation. However, if this is not possi ble then most systems can be hot plugged by using the LINDY CPU Switch Multiscreen’s mouse restoration functions. The keyboard connection will normally restore itself automatically.

On many PCs, mouse movement will be lost if the PS/2 mouse is unplugged and plugged back in whilst the PC is running. Mouse movement can then only be restored by rebooting the PC. This is because the mouse drivers only setup and enable the mouse when the PC is initially booted.

If you have switched off your LINDY CPU Switch Multiscreen or you are attempting to ‘hot plug’ it into a system that is already running, you may be able to restore lost mouse movement using the LINDY CPU Switch Multiscreen's mouse restoration functions.

Mouse restoration functions should be used with care as unpredictable results may occur if the wrong mouse type is selected. If in doubt restore the mouse by powering down the PC normally.

Standard PS/2 mouse data uses a different data format to IntelliMouse data and so two reset functions are provided on the LINDY CPU Switch Multiscreen. The type of data format expected by the PC depends upon the driver and the type of mouse that was connected when the driver was booted. The following table may be used as a guide.

Note that the mouse reset functions predict the likely mouse resolution settings but may not restore the speed or sensitivity of the mouse exactly as they were when the

LINDY CPU Switch Multiscreen Installation and Use Page 20

PC originally booted.

Type of mouse / system Driver type Likely expected Suggested Connected at bootup data format restoration

PS/2 PS/2 only PS/2 F5 PS/2 IntelliMouse PS/2 F5 IntelliMouse/CPU Switch PS/2 only PS/2 F5 IntelliMouse/CPU Switch IntelliMouse IntelliMouse F6

To restore lost mouse movement on a CPU connected to the LINDY CPU Switch Multiscreen:

1) Select the CPU that has lost its mouse movement

2) Press the select key on the front of the LINDY CPU Switch Multiscreen for 5

seconds until ‘C’ is displayed. You are now in configure mode.

3) To restore a PS/2 mouse connection press

)



Or, to restore an IntelliMouse connection press

)

I

4) Exit from configure mode by typing

(



5) Test the mouse movement by moving the mouse a short distance.

F5 - Restore PS/2 mouse function F6 - Restore IntelliMouse function

2.12 Upgrading the CPU Switch’s flash memory

The LINDY CPU Switch Multiscreen uses flash memory technology which enables the firmware code to be upgraded by the user. Upgrades are performed by connecting a PC's serial port to the LINDY's options port and running an upgrade program on the PC. This upgrade program downloads the new firmware to the LINDY CPU Switch Multiscreen and checks that the data has been programmed correctly.

LINDY CPU Switch Multiscreen Installation and Use Page 21

To perform a firmware upgrade on your LINDY CPU Switch Multiscreen you will need a suitable serial upgrade cable and an IBM PC compatible computer with an RS232 serial port and an operating system that supports DOS. Upgrade cables may be purchased for LINDY Technology or may be made using the wiring specification given in Appendix A4. You will also need to download the latest version of the LINDY CPU Switch Multiscreen firmware which is available free of charge at www.lindy.com.

To perform a flash upgrade on the LINDY CPU Switch Multiscreen:

Step 1 - Connect your computer to the LINDY CPU Switch Multiscreen

Connect your computer’s serial port to the LINDY CPU Switch Multiscreen’s options port (labelled OPTIONS/FLASH).

Step 2 - Select flash upgrade mode using option switch 7

Move option switch 7 on the underside of the LINDY CPU Switch Multiscreen to the ON position.

Step 3 - Reset the LINDY CPU Switch Multiscreen

Reset the LINDY CPU Switch Multiscreen by moving option switch 8 to the ON position (halt and reset) and then back to the OFF position (normal operation). Alternatively you may reset the LINDY CPU Switch Multiscreen by powering off all the attached computers and removing the optional power adapter.

Step 4 - Ensure that the LINDY CPU Switch Multiscreen is powered on

Ensure that the LINDY CPU Switch Multiscreen is powered on. It is normally possible to upgrade the LINDY CPU Switch Multiscreen when it is powered from a single computer, however it is good practice to ensure that there is the maximum possible power availability during flash upgrades and so if possible ensure that all the computers are powered on. The upgrade program monitors the LINDY CPU Switch Multiscreen’s voltage and will not allow an upgrade to be performed if the voltage is insufficient.

The display should now show:

LINDY CPU Switch Multiscreen Installation and Use Page 22

Step 5 - Run the upgrade program

The latest version of the LINDY CPU Switch Multiscreen firmware is available from the LINDY Technology website at www.lindy.com. The CPU Switch

Multiscreen uses the same firmware as the CPU Switch Smart product. The program and data files are supplied as a pair e.g.

CPUSS129.EXE CPUSS129.HEX

and should be downloaded to the same directory on your PC. Run the file CPUSSxxx.EXE (e .g. CPUSS129.EXE) and follow the on-screen instructions. During the upgrade the display will show an upper case U and the dot will flash to show that the upgrade is in progress.

The display will again show a lower case U when the download is complete. Move option switch 7 to the OFF position to exit upgrade mode and start normal operation. You may check the new firmware version by entering configure mode and using the firmware version query function.

Some useful issues to bear in mind when performing flash upgrades

The upgrade program rewrites the LINDY CPU Switch Multiscreen’s firmware code. If the upgrade process is interrupted then the LINDY CPU Switch Multiscreen will have invalid code and will not be able to operate. It is therefore good practice to ensure that the upgrade process is always fully completed. A partial or failed upgrade may be rectified by performing another upgrade. If the upgrade process is interrupted accidentall y then you should immediately repeat the upgrade process

LINDY CPU Switch Multiscreen Installation and Use Page 23

without moving switch 7 from the flash upgrade (ON) position. Switch 7 forces the LINDY CPU Switch Multiscreen into flash upgrade mode and prevents the upgraded code from being run. Running faulty or partially upgraded code may have unpredictable results and may damage your LINDY CPU Switch Multiscreen or computing equipment. For obvious reasons, the code that the LINDY CPU Switch Multiscreen uses to perform upgrades is not itself upgradeable - a common problem on some flash upgradeable products that could effectively be destroyed by a partial upgrade!

WARNING - R unning faulty or partially upgraded code may have unpredictable results and may damage your LINDY CPU Switch Multiscreen or computing equipment.

LINDY CPU Switch Multiscreen Installation and Use Page 24

3. Using the LINDY CPU Switch Multiscreen

This section explains the general operation of the LINDY CPU Switch Multiscreen. We recommend that you read this section before starting to use the product.

3.1 Power on status

At power on the LINDY CPU Switch Multiscreen selects computer 1 and displays ’1’. If a password has been set then ‘P’ will be displayed and the LINDY CPU Switch Multiscreen will remain locked until a valid password is entered.

3.2 Front panel key and remote controller

The front panel key is used to select which channel i s currently controlled by the shared keyboard, mouse and monitor ports. Pressing the key during normal operation will cause the next channel to be selected.

The key can also be used to access the LINDY CPU Switch Multiscreen’s configuration mode (see section 2.6). To do this press the key and hold it down for 5 seconds until ‘C’ appears on the LINDY CPU Switch Multiscreen’s front panel display.

An optional remote controller is also available which replicates the front panel key and display, but can be located remotely from the LINDY CPU Switch Multiscreen. This is particularly useful in applications where the LINDY CPU Switch Multiscreen is located away from the desktop. The remote controller can be convenientl y

LINDY CPU Switch Multiscreen Installation and Use Page 25

attached to your keyboard with a couple of Velcro strips to give instant channel information and key control.

3.3 Status display

The status display usually shows the currently selected port. If autoscan mode is selected, the segments will illuminate in sequence in a clockwise direction interspersed with a display of the currently selected channel. If LINDY CPU Switch Multiscreen has been locked, ‘P’ will be displayed until a valid password has been typed to unlock the unit. Data flow from the mouse or keyboard causes the dot to flash.

LINDY CPU Switch Multiscreen Installation and Use Page 26

3.4 Switching operation

When you select a port, your keyboard and mouse will control the computer that is connected to that port and the video feeds from that that computer will be displayed on the monitors. For example, if you select channel 2 then the video signal arrivi ng at port 2A will be sent to the monitor that is attached to port A. Video arriving at ports 2B, 2C and 2D will be displayed on the monitors attached to ports B, C and D respectively.

3.5 Keyboard hotkey control

LINDY CPU Switch Multiscreen can be conveniently controlled by selecting channel, autoscan mode or security locking from the keyboard. All of the hotkey control commands are invoked by holding down the two hotkeys and then pressing a command key. By default, the two hotkeys are ‘CTRL’ and ‘ALT’, although other combinations can be selected by reconfiguring the hotkeys (see section 4.4). Once the hotkey command has been activated you will need to release the hotkeys and the command key before a new hotkey command is accepted by the LINDY CPU Switch Multiscreen. HOTKEYs + TAB is an exception and this allows you to 'tab through' the ports by holding down the hotkeys and repeatedly pressing TAB.

The hotkey command are summarised below (note that the numbers on the numeric keypad do not form part of a valid hotkey) :

‘HOTKEYs’ and ‘1’ - selects channel 1 ‘HOTKEYs’ and ‘2’ - selects channel 2 ‘HOTKEYs’ and ‘3’ - selects channel 3 ‘HOTKEYs’ and ‘4’ - selects channel 4

‘HOTKEYs’ and ‘TAB’ - selects the next channel

‘HOTKEYs’ and ‘A’ - selects autoscan mode where each channel is displayed for

the selected time (see section 4.2). To cancel autoscan mode simply select any fixed channel either by hotkey or using the LINDY CPU Switch Multiscreen button.

‘HOTKEYs’ and ‘0’ – switches off the video signal and displays 0. This will cause some monitors to go into standby mode or switch off. The video signal can be reenabled by selecting a channel .

‘HOTKEYs’ and ‘L’ - disables the LINDY CPU Switch Multiscreen’s keyboard and

LINDY CPU Switch Multiscreen Installation and Use Page 27

mouse and displays 0. The video signal is switched off. If a password has not been set then the LINDY CPU Switch Multiscreen can be re-enabled by selecting a channel. If a password has been set then the LINDY CPU Switch Multiscreen displays ’P’ to indicate that a valid password must be entered to unlock the switch. Simply type the same key combination as was set during configuration (see section

4.7) followed by the (return) key. Note - if anyone has typed at the keyboard whilst in secure mode, it will be necessary to type (return) first to clear the invalid password, then type the valid password followed by (return) again.

Examples of common hotkey sequences (assuming CTRL + ALT hotkey option):

To select channel 2:

press

ED

release

ED

To ’tab through’ channels:

press

EDY

release

press

release

press

release

YED

3.6 Mouse control

Computers may conveniently be selected using a three button mouse. In order to switch to the next computer simply hold down the central mouse button (the wheel mouse button on an IntelliMouse) and click on the left hand mouse button to select the next computer or the right hand mouse button to select the previous computer. If the LINDY CPU Switch Multiscreen has been set to scan active ports then the next or previous active channel will be selected. If it has been set to scan all ports then the next or previous numerical channel in sequence will be selected (see section 4.5 for more details). Mouse switching may be enabled or disabled by setting options during configuration (see section 4.3). When mouse switching is disabled the third button or wheel button state is ‘passed through’ the LINDY CPU Switch Multiscreen and seen by the application software.

LINDY CPU Switch Multiscreen Installation and Use Page 28

Hold down centre button ( ) Press and release left hand button (

) to select next computer

Hold down centre button (

) Press and release right hand button (

) to select previous computer

3.7 RS232 control

LINDY CPU Switch Multiscreen can be controlled by a remote RS232 device. To select a channel the data rate of the sending devi ce must be set to 1200 baud, 8 bits, no parity and 1 stop bit. No handshaking is used by the LINDY CPU Switch Multiscreen. Simply send the character for the channel which needs to be selected, for example ASCII ‘1’ (hex code 31) will select channel 1, ASCII ‘2’ (hex code 32) will select channel 2 and so on. The LINDY CPU Switch Multiscreen will echo the ASCII character back to the sending device when the channel has been changed. The serial interface pins are found on the options connector on the rear of the LINDY CPU Switch Multiscreen. Pin assignments for this connector are given in appendix A

3.8 Cascading LINDY CPU Switch Multiscreens

LINDY CPU Switch Multiscreen switches can be connected together to expand the number of connected computers. When cascading LINDY CPU Switch Multiscreens a power adapter must be connected to each LINDY CPU Switch Multiscreen. LINDY CPU Switch Multiscreens can be connected in a cascaded tree structure. This can be particularly useful where clusters of computers are located some distance from each other because each unit acts as data booster and can each be up to 30 metres away from the next LINDY CPU Switch Multiscreen. The channel can be selected on remote LINDY CPU Switch Multiscreen units using an extension of the HOTKEY control .

LINDY CPU Switch Multiscreen Installation and Use Page 29

For example, consider a situation where two LINDY CPU Switch Multiscreen units are connected together as shown below. To connect to the computer attached to port 3 on LINDY CPU Switch Multiscreen B the user would hold down the hotkey keys then press ‘2’ followed by ‘3’, whilst keeping the hotkey keys pressed. This will have the effect of connecting to port ‘3’ of the LINDY CPU Switch Multiscreen which is connected into port ‘2’ of the first LINDY CPU Switch Multiscreen unit A.

For example to connect to port 3 on the LINDY CPU Switch Multiscreen cascaded off port 2 of your first LINDY CPU Switch Multiscreen use:

press



release 

press

release 

LINDY CPU Switch Multiscreen Installation and Use Page 30

A typical cascade of two LINDY CPU Switch Multiscreens

LINDY CPU Switch Multiscreen Installation and Use Page 31

3.9 Synchronising LINDY CPU Switch Multiscreens for multiple video head applications

Multiple LINDY CPU Switch Multiscreens may be connected together so that they operate in a synchronised manner. Synchronised operation is useful for applications that require multiple video signals to be switched together. This type of operation is usually required where each computer is fitted with multiple video cards or video cards with multiple video heads. Such configurations are typically required in banking and engineering applications where greater video ’real estate’ is required. Whenever the LINDY CPU Switch Multiscreen’s channel is switched it sends an RS232 command out on its serial interface. The LINDY CPU Switch Multiscreen switches its channel if it receives the same command on its serial interface. Consequently, by linking the serial interfaces a master unit may be made to automatically switch a daisy chain of slaved units as shown in the di agram below. The slave units will require the optional power adapters because they cannot draw their power from the video link alone.

LINDY CPU Switch Multiscreen Installation and Use Page 32

Synchronised LINDY CPU Switch Multiscreens used to

switch eight video channels together

LINDY CPU Switch Multiscreen Installation and Use Page 33

4. LINDY CPU Switch Multiscreen configuration options

All the options described in this section are entered in LINDY CPU Switch Multiscreen configure mode - see section 2.6 for instructions on entering configure mode.

4.1 Screen saver time delay

LINDY CPU Switch Multiscreen contains a programmable screen saver which will blank the display after the set time delay with no keyboard or mouse activity. Simply typing at the keyboard or moving the mouse will re-enable the display. The display will flash whilst the LINDY CPU Switch Multiscreen is in screen save mode.

4.2 Autoscan ‘lock on’ mode and delay time

LINDY CPU Switch Multiscreen can be set to select each channel in turn for a period of time set by the autoscan delay time. Autoscan mode is entered by typing the hotkey keys together with ‘A’. By default, only those channels which have a powered up computer connected to them will be scanned. Sometimes it may be desirable to scan all channels, even if the attached computer is switched off (this will simply show a blank screen when it is selected). All the LINDY CPU Switch Multiscreen’s ports will be scanned if option L2 is selected. Some applications may also require the LINDY CPU Switch Multiscreen to power on in autoscan mode. This feature can be selected using the L3 or L4 options.

LINDY CPU Switch Multiscreen Installation and Use Page 34

L1 - CPU Switch Multiscreen only locks on to active ports during autoscanni ng

(default) L2 - CPU Switch Multiscreen locks on to every port in turn during autoscanning L3 - CPU Switch powers on in autoscan mode and locks on to active ports only L4 - CPU Switch Multiscreen powers on in autoscan mode and locks on to all ports

Note: Autoscan mode is ended simply by selecting a fixed channel using the keypad, the keyboard hotkeys or the mouse.

WARNING - Many modern monitors are fitted with automatic power save relays and will switch off after a few seconds if connected to an inactive PC. If you are using such a monitor you must not use the L2 feature. Constant switching on and off of your monitor’s relay will eventually damage your monitor.

4.3 Mouse mode and mouse switching of channels

A three button PS/2 mouse or an IntelliMouse can be used to switch channels on the LINDY CPU Switch Multiscreen. To switch to the next channel, the user simply holds down the central button or wheel button and presses the left or right hand button to change the channel (see section 3.6). If the user does not wish to take advantage of this feature, it can be disabled by selecting U2, U3 or U5. If the third button is being used to switch the LINDY CPU Switch Multiscreen then it is not available for use with PC software although the function of an IntelliMouse wheel is not affected. Consequently in modes U1, U2 and U4 the LINDY CPU Switch Multiscreen reports to the PCs that a 2 button mouse is connected. If you wish to use the full function of a 3 button mouse or IntelliMouse for your PC software then you should select options U3 or U5.

LINDY CPU Switch Multiscreen Installation and Use Page 35

The LINDY CPU Switch Multiscreen supports ‘Internet Mice’ that are compatible with the Microsoft IntelliMouse. These are fitted with a wheel or other scroll control and sometimes have additional buttons. Examples are:

LINDY mice Microsoft IntelliMouse Logitech Pilot Mouse +

Logitech MouseMan+ Genius NetMouse Genius NetMouse Pro

Standard PS/2 and IntelliMouse compatible mice can be connected to the control port. You may configure your CPUs using Microsoft PS/2 or IntelliMouse drivers in any combination as required. The IntelliMouse features are supported on both PS/2 and RS232 CPU connections. When using PS/2 CPU connections, the LINDY CPU Switch Multiscreen will automatically configure itself to the type of mouse requested by the driver. If you are using RS232 CPU connections then you will need to select mouse options U4 or U5 to enable the IntelliMouse features.

U1 - LINDY CPU Switch Multiscreen channels are switchable using a 3 button

(LINDY CPU Switch Multiscreen reports 3 button mouse mode to PCs) U4 - LINDY CPU Switch Multiscreen channels are switchable using 3 button mouse or IntelliMouse

(LINDY CPU Switch Multiscreen reports IntelliMouse mode to PCs) U5 - LINDY CPU Switch Multiscreen channels are not switchable using 3 button mouse or IntelliMouse

(LINDY CPU Switch Multiscreen reports IntelliMouse mode to PCs)

4.4 Keyboard hotkey combination

The keyboard hotkey combination is used to change a channel, set autoscan mode or secure the product (so that the password needs to be typed before it can be used

LINDY CPU Switch Multiscreen Installation and Use Page 36

again). The following keyboard hotkey combinations can be selected. These hotkey combinations are used together with the command keys to trigger the required CPU Switch function. The left and right ALT key combination is particularl y suitable for extended keyboards where additional keys can be programmed to act as a combination of other keys. Such keyboards are supplied with some Gateway 2000 computers. Programming spare keys to trigger the hotkey combination allows channels to be selected via a single key stroke.

H1 - ’CTRL’ and ’ALT’ keys together (left or right hand keys operate) (default) H2 - ’CTRL’ and ’SHIFT’ keys together (left or right hand keys operate) H3 - ’ALT’ and ’SHIFT’ keys together (left and right hand keys operate) H4 - ’RIGHT ALT’ key H5 - ’LEFT ALT’ and ’RIGHT ALT’ keys together H6 - ‘LEFT CTRL’ and ‘LEFT ALT’ keys together H7 - ‘RIGHT CTRL’ and ‘RIGHT ALT’ keys together H8 - No hotkey enabled

4.5 Cycling between all channels or just the active channels

The LINDY CPU Switch Multiscreen can be set to cycle between all channels or just the active channels when using ‘Hotkeys + Tab’ or a three button mouse to switch the channel. This avoids wasting time viewing channels that are not active. Option are:

U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button mouse (default) U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three

button mouse

4.6 Firmware functions (version query, mouse restore and reset)

For technical support purposes, it may be necessary to find the firmware release version for the control software in your LINDY CPU Switch Multiscreen. For

example, if the release version is v1.29 the response shown to

)I will be a

brief display of the digit ‘1’, then

)I will be a brief display of the digit ‘2’,

then )I will be a brief display of the digit ‘9’. You can reset all of the configured options back to the factory default states by typing )I. Use

LINDY CPU Switch Multiscreen Installation and Use Page 37

options )I and )I to restore mouse function on disconnected PS/2 CPU mouse connections.

F1 - Display firmware first digit (Note: F1 is ) followed by  NOT O) F2 - Display firmware second digit F3 - Display firmware third digit F5 - Restore PS/2 mouse function to the currently selected CPU’s mouse port F6 - Restore IntelliMouse function to the currently selected CPU’s mouse port F8 - Reset all configurations to factory default settings. An ‘r’ will show briefly on the display to confirm that the reset has been completed.

4.7 Setting a security password

There are many situations where unrestricted access to corporate file servers or sensitive information needs to be controlled. In such circumstances, the LINDY CPU Switch Multiscreen can be locked away in a room or secure cabinet and controlled remotely. In this mode typing the keyboard hotkeys together with 'L' will blank the screen, disconnect the keyboard and mouse from all of the computers and display ‘P’ on the LINDY CPU Switch Multiscreen display. Control can only be regained by typing the correct password on the keyboard.

To set the password in configure mode, first type ‘P’ then (return). The display on LINDY CPU Switch Multiscreen will change to show ‘=' and you can then type your password. The password is not case sensitive and can be any combination of key strokes, including the functi on keys, but excluding the (ctrl), (alt), (shift) and (return) keys. When you have typed in your password type (return) to register it in the stored memory. Do not worry if you type the password incorrectly, you can always re-enter configure mode and set the password again. If you have lost the password and the LINDY CPU Switch Multiscreen is locked, the unit may be unlocked by powering down the LINDY CPU Switch Multiscreen, entering configure mode at power on (see section 2.6), and performing a complete reset using the F8 function.

NOTE - The password consists of a combination of key strokes rather like the code to a safe. The key strokes are not case sensitive and can include all the keys on the keyboard (except ctrl, alt, shift and enter). Consequently the following 'password' would be valid:

R)5('





LINDY CPU Switch Multiscreen Installation and Use Page 38

4.8 Cascade query code

The LINDY CPU Switch Multiscreens use a special ‘query code’ to detect whether or not they are connected to another LINDY CPU Switch Multiscreen. By default your LINDY CPU Switch Multiscreen uses query code AD. LINDY CPU Switch Junior OSD (another range of keyboard / mouse / video switches from LINDY) units with firmware versions less than 1.09 used query code EF. This was found to conflict with a small number of other (rare) devices that used the same query code so an alternative query code was provided to ensure compatibility. Either query code may be used but you should make sure that all cascaded LINDY CPU Switch Multiscreen and LINDY CPU Switch Junior OSD units are set to use the same query code. If any of the cascaded LINDY CPU Switch Junior OSDs have firmware versions less than

1.09 then the cascade query code for all the LINDY CPU Switch Multiscreens and LINDY CPU Switch Junior OSDs should be set to EF.

L7 – Cascade query code = AD (default) L8 – Cascade query code = EF

4.9 Resolving slow mouse problems

Due to certain technical reasons some systems running particular combinations of operating system and mouse drivers are sensitive to small timing changes relating to mouse communications. The introduction of a switch like the LINDY CPU Switch Multiscreen inevitabl y causes some timing changes and in rare cases interactions have been observed that causes the mouse to run very slowly. Certain HP Vectra computers running later versions of Windows NT with Logitech mouse drivers and Logitech mice have been observed to exhibit such interactions with older switches. One solution to this problem is to change the mouse driver.

The LINDY CPU Switch Multiscreen is a high performance device that is carefully engineered to minimise such interactions and should not exhibit this characteristic. Nevertheless such interactions are unpredictable and so the LINDY CPU Switch Multiscreen is fitted with a feature that ensures that the mouse can never operate at a very slow rate regardless of such interactions. This feature is activated using the following options:

L5 – Allow the mouse to run at any speed (default) L6 – Don't allow the mouse to run at very slow speeds

LINDY CPU Switch Multiscreen Installation and Use Page 39

4.10 Exit configure mode

When you have finished configuring any special options, simply type ‘E’ followed by (return) to exit configure mode and return to normal operation mode. The attached computers can now be switched on.

LINDY CPU Switch Multiscreen Installation and Use Page 40

Appendix A. Cable and connector specifications

IMPORTANT NOTE

The maximum cable lengths supported vary widely between devices and cables. It may be possible to use cables that are longer than those specified below with certain PCs and peripherals but this cannot be guaranteed. If you experience problems try using shorter cables.

A1. Keyboard, monitor and mouse to LINDY CPU Switch Multiscreen

All of the shared devices plug di rectly into the relevant ports at the rear of the LINDY CPU Switch Multiscreen. If you use an AT style keyboard you will need an AT (5 pin DIN female) to PS/2 (6 pin mini-DIN male) converter.

Cable specification (self-powered operation): Keyboard, monitor and mouse cables should be no longer than 2 metres.

Cable specification (with optional power adapter): Keyboard, monitor and mouse extension cables can be used to increase the distance from LINDY CPU Switch Multiscreen up to 10m. Most keyboards and mice will also operate at distances of 20 metres.

A2. LINDY CPU Switch Multiscreen to PCs 1 to 4

Cable specifications: Video - 15 pin high density male D connector to 15 pin high density male D

connector wired as a standard VGA PC to monitor cable. There are two types commonly available. The best type cables which will give excellent quality are constructed with coaxial cable cores. Cheaper ‘data’ cables are often used, but can degrade video quality if used over longer distances. Avoid using 'data' cables longer than 2 metres unless the video quality is not important. Good quality coaxial video cables may be run at distances up to 30 metres with little loss of video quality. If you wish to make use of the DDC (Display Data Channel) capabilities of the LINDY CPU Switch Multiscreen then you will need to use cables that have the DDC signalling lines connected (pins 12 and 15 on the 15-way video connector). Not all video

LINDY CPU Switch Multiscreen Installation and Use Page 41

cables have these DDC lines connected.

Keyboard and PS/2 mice - 6 pin mini-DIN male connector to 6 pin mini-DIN male connector with all lines connected straight through (1-1,2-2 etc.). If the PC has a 5pin DIN AT style keyboard connector you will need a PS/2 to AT keyboard adapter 6-pin mini-DIN female to 5-pin DIN male (readily available). For ‘interface powered’ operation without the optional power adapter the cables should be no longer than 5 metres (see section 2.4 for more details). For operation with the power adapter, cables should be no longer than 30 metres.

RS232 serial mice - these require a special converter to connect the RS232 lines present on the LINDY CPU Switch Multiscreen mouse ports to the RS232 port on a PC.

Cables should be no longer than 30 metres.

NOTE - There are several common wiring specifications for 6-pin mini-DIN to 9-pin serial adapters. If you have an adapter that has been supplied with a mouse it may have a completely different internal wiring to that shown above and may not be compatible with the LINDY CPU Switch Multiscreen

LINDY CPU Switch Multiscreen Installation and Use Page 42

Recommended cables:

3-in-1 keyboard, video and mouse combination cable - For convenience,

neatness and high video quality we recommend the LINDY brand 3-in-1 combination cables for the keyboard, mouse and first video head connection. For the additional video connections we recommend high quality LINDY tri-coax video cables. LINDY cables are availabl e in various different lengths to suit your requirements. Please quote the following part codes when ordering from your supplier.

Part Code Description

33711 3-in-1 LINDY cable, 1 metres long 33712 3-in-1 LINDY cable, 2 metres long 33713 3-in-1 LINDY cable, 3 metres long 33714 3-in-1 LINDY cable, 5 metres long 33716 3-in-1 LINDY cable, 10 metres long *

* The optional power adapter may be required (see section 2.4).

Additional Video Connectors - For the additional video connections we recommend high quality LINDY Premium or Premium Gold S-VGA video cables. LINDY cables are available in various different lengths to suit your requirements. Please quote the following part codes when ordering from your supplier.

Premium S-VGA Cable – Heavily shiel ded tri-coaxial RGB cable giving you a crisper display at higher resolutions.

Part Code Description 37332 Premium S-VGA Monitor Cable, 2 metres long 37333 Premium S-VGA Monitor Cable, 3 metres long 37334 Premium S-VGA Monitor Cable, 5 metres long 37335 Premium S-VGA Monitor Cable, 7.5 metres long 37336 Premium S-VGA Monitor Cable, 10 metres long 37337 Premium S-VGA Monitor Cable, 15 metres long 37338 Premium S-VGA Monitor Cable, 20 metres long

LINDY CPU Switch Multiscreen Installation and Use Page 43

Premium Gold S-VGA Cable – Premium Gold S-VGA cable is designed for the

highest quality monitor applications, including CAD, DTP and Multimedia installations when preservation of display quality is a major consideration.

Part Code Description 37245 Premium Gold S-VGA Monitor Cable, 2 metres long 37246 Premium Gold S-VGA Monitor Cable, 3 metres long 37247 Premium Gold S-VGA Monitor Cable, 5 metres long 37248 Premium Gold S-VGA Monitor Cable, 10 metres long 37254 Premium Gold S-VGA Monitor Cable, 15 metres long 37250 Premium Gold S-VGA Monitor Cable, 20 metres long 37251 Premium Gold S-VGA Monitor Cable, 30 metres long 37252 Premium Gold S-VGA Monitor Cable, 40 metres long 37253 Premium Gold S-VGA Monitor Cable, 50 metres long

A3. Options port pin assignments

The 15 way D connector located on the back of the LINDY CPU Switch Multiscreen (labelled OPTIONS / FLASH) provides connections for the remote control module and allows an external RS232 device to control the LINDY CPU Switch Multiscreen. See section 3.7 for more details.

Pin 9 = GND Pin 10 = TXD Pin 11 = RXD

Other pins to be left unconnected

LINDY CPU Switch Multiscreen Installation and Use Page 44

A.4 Flash upgrade cable connection

The cable connections shown below are to connect either COM1 or COM2 of a PC to the LINDY CPU Switch Multiscreen to allow flash upgrades.

A.5 RS232 synchronisation cable pin assignments

The cable connections shown below are to connect two LINDY CPU Switch Multiscreens together for synchronised operation (see section 3.9)

LINDY CPU Switch Multiscreen Installation and Use Page 45

Appendix B. Problem Solving

Problem: Poor video quality with smearing fuzziness or ripple. Action: Use screened coaxial video cables to connect your devices.

Problem: Mouse does not move cursor on screen. Action: Ensure that the mouse and computer are both connected to LINDY CPU Switch

Multiscreen before power is connected and ensure that the LINDY CPU Switch Multiscreen is powered on before the attached computer. Ensure that your software is configured to accept a Microsoft compatible mouse of the type that you have connected (PS/2 or RS232). If you move the mouse and the activity indicator (dot on 7 segment display) does not flash then the LINDY CPU Switch Multiscreen is not receiving data from the mouse. Check the mouse connection to the LINDY CPU Switch Multiscreen, try resetting the mouse using the reset function (section 2.10) or re-powering the CPU Switch Multiscreen. If you are attempting to connect the CPU Switch Multiscreen to a CPU with a PS/2 mouse connection that has not been powered down then you will need to use the mouse restoration functions F5 or F6 (see section 2.11).

Problem: Keyboard does not function or functions intermittently. Num lock light does not always come on when the num lock key is pressed. Action: Some older keyboards were designed for use with specific computers and are not truly AT or PS/2 compatible. Try another keyboard.

Problem: Mouse causes channel to change. Action: Some cheaper mice are not fully compatible with the LINDY CPU Switch

Multiscreen and can lose data causing the channel to be changed (if mouse switching of channels is enabled). If you experience this problem then change the mouse and use a Microsoft, Logitech, IBM, Compaq or Hewlett-Packard type. Ensure that you are using a Microsoft compatible mouse driver on your PC. Some other manufacturers’ drivers may switch the mouse to use a proprietary mouse data format not supported by the LINDY CPU Switch Multiscreen. If you have unplugged and re-connected a mouse to the LINDY CPU Switch Multiscreen then ensure that you reset it using the mouse reset function (see 2.10).

Problem: Mouse jumps around the screen after disconnecting the mouse cable or powering down the LINDY CPU Switch Multiscreen. Action: If you have disconnected and re-connected a CPU mouse cable or you have powered down the LINDY CPU Switch Multiscreen then the mouse data format may be out of synchronisation with that required by the PC (PS/2 or Intellimouse). Try the ‘restore Intellimouse’ function (F6) to resolve the problem or re-power the CPU.

Problem: Mouse moves very slowly but otherwise functions correctly. Action: Change the mouse driver to a Microsoft mouse driver or take the action

recommended in section 4.9 of this manual.

Lindy CPU, CPU Multiscreen 32346, CPU Multiscreen 32347, CPU Multiscreen 32348, CPU Multiscreen 32349 Installation And Use Manual

Specifications and Main Features

Frequently Asked Questions

User Manual