Page 1
70582
PCI 32 bit P&P
1P (ECP/EPP 32FIFO)
www.lindy.com
Page 2
u
Description
The 70582 32Bit PCI bus Plug & Play 1P I/O card is equipped with one
ECP/EPP/SPP/BPP IEEE 1284 CENTRONICS Parallel Interface. It includes
one 25 pin female connector for peripherals’ units with IEEE 1284 C ENT RON IC S
Para lle l I nt e r f ac e .
u
Hardware Specification
Parallel Port:
Parallel Chipset: SUN1888, Hardware FIFO are 32Byte FIFO
Compatible chips: with ACC3203, ST-78C36, and HT6535.
IEEE standard: ECP/EPP/SPP/BPP (PS-II) Inter face
Max. Speed: Up to 2MB/Sec
u
Hardware Installation
½
Turn off the power of your computer
½
Plug the 70582 Parallel Adapter into the PCI bus of your computer
½
Connect the peripheral Printer, Modem, Scanner… etc. to this adapter
½
Turn on the power of your computer
PCI device listing display (for example…)
!
!
Bus No Device No Func No Vendor ID Device ID Device Class IRQ
0 7 1 8086 7010 IDE Controller 14
0 13 0 1409 7268 Simple COMM.
Controller
When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error
10
occurs, please change the PCI slot.
After correct hardware installation you can start installing the software from the
driver CD.
!!!!!!!
!!!!!!
!
PAGE 2
Page 3
This device complies with Part 15 of the FCC
Rules. Operati on is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
u
Pin Assignments
Parallel 25 Pin female connector pin assignments:
Parallel 25 Pin female connector:
Pin Signal Pin Signal Pin Signal
1 STROBE 10 ACKNOWLEDGE 19 GROUND
2 DATA 0 11 BUSY 20 GROUND
3 DATA 1 12 PAPER EMPTY 21 GROUND
4 DATA 2 13 SELECT 22 GROUND
5 DATA 3 14 AUTO FEED 23 GROUND
6 DATA 4 15 ERROR 24 GROUND
7 DATA 5 16 INIT 25 GROUND
8 DATA 6 17 SELECT INPUT 26 GROUND
9 DATA 7 18 GROUND
u
Technical Specification
Compatibility: PCI 32Bit card for 486/586/Pentium/Pentium-II/
P-III/C5/K6
Operating system: WIN9.x/ME/NT/2000/XP, LINUX, DOS
Chips: 1 x SUN1888
Connections: Connector parallel 1 x DB 25 f
PCB: 2 Layer / 120 x 63 mm
PAGE 3
Loading...