Lindy 51535 User Manual

ExpressCard / 34

1 Port Parallel

User Manual English

System Requirements
Hardware:

Description

 Fully compliant with Express Base Specification
 Compatible for PCI Express Card application requirements.
 PCI-E Multi Function Peripheral Controller with x1Lane Interface.
 Support four PCI-E functions.

Parallel:

 Port IEEE1284-compliant.
Package Contents
This Express I/O Card package includes the following:

-Hardware installation guide -Software installation guide

-Express Card -Driver CD
Please make sure that all of these items are present. If anything is missing,
contact your vendor for assistance.

The Super PCI Express I/O Card

Installing the Software Drivers

This section provides information on how to install the Super PCI-E I/O drivers for
the following operating systems:

Windows 2000 Driver installation

1. At the Add New Hardware Wizard windows, click on “Next”

2. Select the option “Install from a list or specific location (Advanced)” and
click on “Next”

LINDY No. 51535

www.lindy.com

3. Select the option “Search for the best driver in these locations.” and click on
“Next”

4. Click “Next” and then “Finish” respectively.

5. Remove the diskette, then select “Yes” to restart the computer for the setup to
take effect.

To verify successful installation in Windows 2000:

1. From the main desktop, click on My Computer, then double-click on Control
Panel, System, and Device Manager.

1. Double-click on either Ports (COM & LPT) or Serial port device

options. PCI I/O Board should be displayed when successfully installed.
The port is ready to connect new device.

Windows XP Driver installation :

1. At the Add New Hardware Wizard windows, click on “Next”

2. Select the option “Install from a list or specific location (Advanced)” and

click on “Next”

3. Select the option “Search for the best driver in these locations.” and click on
“Next”

4. Click “Next” and then “Finish” respectively..

5. Remove the diskette, then select “Yes” to restart the computer for the setup to
take effect.

To verify successful installation in Windows XP:

1. From the main desktop, click on My Computer, then double-click on Control
Panel, System, and Device Manager.

2. Double-click on either Ports (COM & LPT) or Serial port device options. PCI

I/O Board should be displayed when successfully installed. The port is ready

to connect new device.

Windows VISTA Driver installation:

1. Start power to RUN VISTA

2.

CD drive to CD-ROM

3.

Click on “Locate and install driver software (recommended)”.