Lindy 51245 User Manual

PCIe Low Profile

2S (16C950 128 FIFO)

User Manual English

LINDY No. 51245

www.lindy.com

Introduction

Thank you for purchasing the LINDY PCIe Low Profile two Port Serial.
This card is equipped with one high speed RS-232 serial interfaces.

The serial ports include 128Byte FIFO with speeds up to 921Kb/Sec.

Port Specification

Serial Port:

• Chipset: Oxford 952, 128Byte DMA FIFO

• Compatible chips: with 16C950, 16C750, 16C650, 16C550,

and 16C450.

• IEEE standard: RS-232 Interface

• Max. Speed: Bi-directional speeds from 50 bps to

15Mbps/port.

• 2 x DB9 Male

Package Contents

 1 x LINDY PCIe Low Profile 2S Card
 LINDY User manual
 LINDY Driver CD

Installation

1. Turn off the power of your computer and remove the power

2. Install the PCIe Low Profile card into an available PCIe Low

3. Connect the peripheral ie Printer, Modem, etc. to the adapters

4. Re-connect the power cable & turn on the power of your
PCI device listing display (for example…)

Bus

No

0 7 1 8086 7010 IDE Controller 14
0 13 0 1409 7168 Simple COMM.

If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an
error occurs, please try another PCI slot.
Once the hardware has installed correctly you can start installing the
software from the driver CD.

Pin Assignments

cable
profile slot in your computer
port
computer

Device

No

Func

Vendor ID Device

No

Device Class IRQ

ID

10

Controller

Serial 9 Pin male connector pin assignments:

Pin Signal Pin Signal Pin Signal Pin Signal

1 CD 4 DTR 6 DSR 8 CTS
2 RD 5 GROUND 7 RTS 9 RI
3 TD

Serial 9 Pin male connector :

Technical Specifications

• Support x1,x2,x4,x8,x16（lane）PCI-Express Bus
connector keys

• Operating system: DOS, WIN 9.x, ME, NT, 2000, XP, 2003
Server, VISTA, Win7, LINUX,

• 5V / 12V / RI (no power) power selectable on each
individual port (Pin 9th )

• Ready of the Intel and AMD 32/64-bit CPU System

• Built-in 128 byte hardware FIFO

• IRQ and IO address assigned by System

• Certified by Microsoft WHQL, CE, FCC approval

• PCB: 80 x 65 mm

Certifications

FCC Certifications

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received;
including interference that may cause undesired operation.

CE Certification

This equipment complies with the requirements relating to
electromagnetic compatibility, EN 55024 and EN55022 class A for ITE,
EN61000-3-2/-3 the essential protection requirement of Council Directive
89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products

United Kingdom

In 2006 the European Union introduced regulations (WEEE) for the
collection and recycling of all waste electrical and electronic equipment.

It is no longer allowable to simply throw away electrical and electronic
equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE
regulations into national law in slightly different ways. Please follow your
national law when you want to dispose of any electrical or electronic
products. More details can be obtained from your national WEEE
recycling agency.

Germany / Deutschland

Die Europäische Union hat mit der WEEE Direktive umfassende
Regelungen für die Verschrottung und das Recycling von Elektro- und
Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung
im Elektro- und Elektronikgerätegesetz – ElektroG in deutsches Recht
umgesetzt. Dieses Gesetz verbietet vom 24.März 2006 an das
Entsorgen von entsprechenden, auch alten, Elektro- und
Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den
lokalen Sammelsystemen bzw. örtlichen Sammelstellen zugeführt
werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für
den weiteren Recyclingprozess übernimmt die Gesamtheit der
Gerätehersteller.

France

En 2006, l'union Européenne a introduit la nouvelle réglementation
(WEEE) pour le recyclage de tout équipement électrique et électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la
nouvelle réglementation WEEE de manières légèrement différentes.
Veuillez suivre le décret d’application correspondant à l’élimination des
déchets électriques ou électroniques de votre pays.

Italy

Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la
raccolta e il riciclo di apparecchi elettrici ed elettronici. Non è più
consentito semplicemente gettare queste apparecchiature, devono
essere riciclate. Ogni stato membro dell’ EU ha tramutato le direttive
WEEE in leggi statali in varie misure. Fare riferimento alle leggi del
proprio Stato quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio
del proprio Stato.

LINDY No. 51245

www.lindy.com