Lindy 51082 User Manual

USB3.0 PCI Port

User Manual English

LINDY No. 51082

www.lindy.com

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (OCT.2010)

USB 3.0 (NEC chipset) 5Gbps 2Ports PCI Card

1. Introduction

USB 3.0 SuperSpeed 5Gbps Host Adapter to support all kind of

1.5Mbps, 12Mbps, 480Mbps and 3Gbps USB Devices!

1.1. Features

o

Compliant with Universal Serial Bus 3.0 Specification Revision 1.0

o

Compliant with Intel eXtensible Host Controller Interface (xHCI) Specification

0.95

o

Two USB 3.0 Type A downstream connectors on board

o

All USB ports can handle SuperSpeed (5 Gbps), HighSpeed (480 Mbps),
FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction

o

Supports any USB3.0, USB2.0 and USB1.1 devices

o

Compliant with PCI Express Specification 2.0 or PCI Specification 3.0

o

64bit and 32bit Windows 7, Vista, XP drivers support

o

Chipset : NEC

1.2. Power Jack Spec

o

Power Input : 5.25” Internal Power Adapter

1.3. Package Contents

Host Adapter
Users Manual
Driver CD

2. Windows 7/Vista/XP Driver Installation

1. Insert various USB 3.0 host adapter into an available PCIe or PCI or
ExpressCard slot.

2. If PCIe card, connect power cable from PC Power supply to PCIe card
power connector.

******Note: Make sure the power is well connected, otherwise your will see “Power

Surge on Hub Port” message and no 5V bus power in USB ports.

3. Windows will display the 'Found New Hardware Wizard'.

4. Skip the driver installation

5. Run installer setup.exe on Driver CD E:\ USB3.0 Host\NEC to have the latest
driver for 32bit /64bit Windows.

- 2 -