Lindy 43278 User Manual

© LINDY Group - FIRST EDITION (August 2019)

USB 3.1 Type C Multi-Port Converter

User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano

No. 43278

lindy.com

Tested to comply with
FCC Standards
For Home and Office Use!

User Manual English

Introduction

Thank you for purchasing the USB 3.1 Type C Multi-Port Converter This product has been designed to
provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.

This USB 3.1 Type C Multi-Port Converter allows you to maximise the functionality of a single USB 3.1
Type C port by connecting an HDMI display, a VGA monitor, up to three USB 3.1/3.0 SuperSpeed
peripherals as well as a USB Type C power supply to your Macbook or notebook. Through the RJ45 port
you can access a Gigabit Ethernet Network and it is also possible to access SD or microSD cards. Please
note that a USB 3.1 Type-C port with support for DisplayPort Alternate Mode is required for video
functionality.

Package Contents

▪ USB 3.1 Type C Multi-Port Converter
▪ This manual

Features

▪ Compatible with all USB Type C equipped computers with DisplayPort Alternate Mode
▪ Input: USB 3.1 Type C connector – male, 1x USB Type C female (only for charging, no data transfer)
▪ Output: HDMI A female, VGA female, 3x USB Type 3.1 Gen 1 / 3.0 Type A female, RJ45 female, SD

and microSD card slot

▪ USB 3.1 Gen 1 / 3.0 standard (5 Gbps)
▪ Max. resolution: 3840 x 2160 30Hz (HDMI), 1920x1080@60Hz (VGA)
▪ Works as a splitter if both VGA and HDMI are connected at the same time, max. resolution

1920x1080@60Hz with the same video content

▪ 10/100/1000Mbps Gigabit Ethernet
▪ USB Type C Power Delivery input port for charging (no data transfer) with max. 100W (20V / 5A)

Installation & Operation

The USB 3.1 standard allows USB ports to optionally feature DisplayPort Alternate Mode; this uses the
USB C connector as a video output without the need for additional drivers or software. Please check that
your computer supports this feature.

To begin using this Multi-Port Converter simply connect the USB 3.1 Type C male connector to the USB

3.1 Type C port of your computer. Any required drivers will be automatically downloaded from the internet.
Connect the HDMI socket and/or VGA socket of the converter to the HDMI/VGA port of your monitor or

projector using appropriate male to male cables (not included). Use a standard RJ45 Ethernet cable (not
included) to connect to your network. Additional USB devices can be connected to the USB Type A ports
of the Mini Docking Station, USB 3.1 Gen1 5Gbps data transfer rates are supported whilst legacy USB

2.0/1.1 devices may also be connected. The SD and microSD card slots allow access to SD and micro SD
cards.

By connecting a compatible USB Type C power supply (not included) it is also possible to charge your
Macbook or Notebook using the Type C Power Delivery port, just connect the power supply to the Power
Delivery port when required.