Lindy 43179 User Manual

USB 3.1 Type C Dual Display Adapter HDMI &
VGA

Part No.: 43179

Description

Converts a USB 3.1 Type-C port to a HDMI and VGA port
Requires DisplayPort Alternate Support by the USB 3.1 Port/Bus
Compatible with Thunderbolt 3
Supports resolutions up to UHD 4K 30Hz (HDMI) and 1920x1200p 60Hz (VGA)
Plug and Play installation, no drivers required, Bus-powered
Length (incl. housing): approx. 15 cm
Colour: White
2 Year Warranty

The LINDY USB 3.1 Type C to 4K HDMI & VGA Adapter Converter allows you to connect two high definition screens to your
Macbook, Ultrabook or Notebook with USB 3.1 DisplayPort Alternate Mode.

With support for both SST (Single Stream Transport) and MST (Multi-Stream Transport) the Converter can send the same display
information to two screens (SST) or use both screens as individual displays with separate display information (MST), this is easily
configured using the display settings of your computer.

Installation is simple as no drivers are required and the Type C's reversible design means that you do not have to pay attention to
which way the cable is inserted into the port.

Technical details

Input: USB 3.1 Type-C connector - Male
Output: HDMI Female, VGA Female
USB 3.1 Gen 1 Standard
Requires DisplayPort Alternate mode
Max. resolution: UHD 4K 4096x2160p 30Hz (HDMI) / 1920x1200p 60Hz (VGA)
Supports SST and MST display modes
Chipset: Synaptics VMM3332
HDMI 1.4 compatible
RGB format supported at 8/10/12 bits-per-component
YCbCr format supported at 8/10/12 bits-per-component in 4:4:4/4:2:2/4:2:0 pixel format
Audio output formats: 8-ch LPCM, compressed audio and HBR
24-bit audio sample size, up to 192 kHz sample rate
Supports HDCP 1.4 content protection
Powered via USB port, no external PSU port

© LINDY 2017