LINDY 42700 User Manual [ml]

For Home and Office Use!

USB 2.0 Cat.5 Extender 100m

4 Port

User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano

Tested to Comply with
FCC Standards

No. 42700

www.lindy.com

© LINDY Group - THIRD EDITION

(DECEMBER 2016)

User Manual English

Introduction

Thank you for purchasing the LINDY USB 2.0 Cat.5 Extender. This product has been designed to provide
trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain it for future reference.

This USB 2.0 Cat.5 Extender is composed of a Transmitter and Receiver. It enables a USB 2.0 host device
to send data up to 100 metres. The receiver unit has an integrated 4 port hub for connection of multiple
USB peripherals.

Package Contents

• Transmitter Unit

• Receiver Unit

• Multi-Country Power Supply 5V DC 1.2A for Transmitter unit

• Multi-Country Power Supply 5V DC 2.6A for Receiver unit

• USB 2.0 A/B cable

• Assembly Screws

• This Manual

Features

• True plug and play, no driver installation required

• Extends USB 2.0 high-speed and USB 1.1 devices up to 100m over Cat 5e (or better) cable

• Integrated four port hub

• Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps

• Supports all major operating systems with USB support

Specification

• Transmitter: Input Port 1x USB 2.0 B, Output Port 1x RJ45

• Receiver: Input Port 1x RJ45, Output Port 4x USB 2.0 A

• Dimensions: 9 x 7.3 x 3.1cm each

• Weight: 163g / Transmitter, 169g / Receiver

• Operating Temperature: 0 – 50°C

• Storage Temperature: -20 – 70°C

• Humidity: 0-80% RH, non-condensing

Installation

1. Place the local extender near the host computer. Install the supplied USB cable between the

Transmitter and USB port on the host computer.

2. Connect the supplied 5VDC 1.2A power adapter to the Transmitter.

3. Place the Recevier near the USB device in the desired remote location.

4. Connect the supplied 5VDC 2.6A power adapter to the Receiver.

5. Connect the Transmitter and Receiver by using a Cat.5 (or better) cable (not included!).

LED indications

• Red Power LED: The 5V power adapter is plugged in

• Orange Link LED: Transmitter and receiver are powered & connected by Cat.5 cable

• Green Active LED: Receiver´s USB port(s) are occupied