LINDY 42693 User Manual [ml]

For Home and Office Use!

USB 2.0 Cat.5 Extender 50m

User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano

No. 42693

www.lindy.com

Tested to Comply with
FCC Standards

© LINDY Group - THIRD EDITION

(February 2017)

User Manual English

Introduction

Thank you for purchasing the LINDY USB 2.0 Cat.5 Extender. This product has been designed to
provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.

The USB Cat.5 Extender is composed of a transmitting and receiving unit, and enables any USB host
device to send data up to 50 metres. In addition, by adding an additional USB Hub several USB
devices can be connected.

Package Contents

• Transmitter/Local Unit

• Receiver/Remote Unit

• Multi-Country Power Supply

• LINDY Manual

Features

• Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices

• Operates with USB 2.0 high speed host controllers and USB 1.1 classic hosts

• Further devices can be connected by connecting an additional USB hub

• True plug and play without any driver installation

• Compatible with all USB equipped computers

• Supports distances up to 50 meters using Cat.5/6 cables

• LED indicator

• Power supply for remote unit included

Specification

• Local Unit: 1 x USB 2.0 A male, 1 x RJ45 female

• Remote Unit: 1 x RJ45 female, 1 x USB 2.0 A female

• Power Supply 5V / 2.1A DC with 4 exchangeable power supply plugs for Europe, Great Britain,

North America and Asia

• Dimensions (mm): 60 (W) x 30 (D) x 20 (H)

• Operating Temperature: 0°~85° C Installation

Installation

Transmitter:

• Plug the USB A plug of the Transmitter into a USB A female port of your PC or laptop

• Connect a Cat.5/6 cable up to 50 metres long with the other end connected to the RJ45 port on the

Receiver (see below)

Receiver:

• Connect your USB device such as keyboard, mouse, printer, webcam, hard disk drive, etc. with a
standard USB cable to the USB A female port

• Power DC 5V Jack: Plug the supplied 5V 2.1A DC power supply into the unit and connect the
adaptor to an AC wall outlet.

• Connect a Cat.5/6 cable up to 50 metres long with the other end connected to the RJ45 port on the
Transmitter (see above)