LINDY 42688 User Manual [ml]

Tested to Comply with
FCC Standards
For Home and Office Use!

50m USB 2.0 Cat.5 Extender STP

4 Port

User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano

No. 42688

lindy.com

© LINDY Group - THIRD EDITION (December 2017)

User Manual English

Introduction

Thank you for purchasing the LINDY USB 2.0 Cat.5 Extender STP 50m. This product has been designed
to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference. This extender is composed of a transmitting unit and a receiving unit with 4 USB ports and
enables a USB host device to send data up to 50 metres.

Package Contents

 Local/Transmitter Unit
 Receiver Unit
 Multi-Country Power Supply 5VDC 2.6A
 Assembly screws
 LINDY Manual

Features

 Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
 Integrated four port USB hub
 Supports distances up to 50 meters using Cat.5e (or better) STP cables
 True plug and play without any driver installation
 Supports all major operating systems with USB support
 Multi Country Power Supply 5VDC 2.6A included

Specification

 Transmitter: Input Port 1 x USB 2.0 A, Output Port 1 x RJ45
 Receiver: Input Port 1 x RJ45, Output Port 4 x USB 2.0 A, Socket for PSU
 Multi Country Power Supply: 5VDC 2.6A
 Dimensions:

Transmitter: 48x25x25cm (1.89x0.98x0.98in), Receiver: 60x70x25cm (2.36x2.76.0.98in)
 Weight:
Transmitter: 0.055kg (0.12lb), Receiver: 0.115kg (0.25lb)

 Operating Temperature: 0°C - 55°C (0°F – 131°F)
 Storage Temperature: -20°C - 85°C (-4°F – 185°F)
 Humidity: up to 95% RH (non-condensing)

Installation

1. Connect the USB A plug of the local unit to a USB port on the host computer.

2. Place the remote extender near the USB device(s) in the desired remote location.

3. Connect the supplied 5VDC 2.6A power adapter to the remote unit.

4. Connect the local to the remote extender by using a Cat.5e (or better) STP cable (not included!).