Lindy 42681 User Manual

© LINDY Group - SECOND EDITION (July 2018)

USB 2.0 Cat.5 Extender 50m

Power over RJ45, 4 Port

User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano

No. 42681

lindy.com

Tested to Comply with
FCC Standards
For Home and Office Use!

User Manual English

Introduction

Thank you for purchasing the LINDY USB 2.0 Cat.5 Extender 50m. This product has been designed to
provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.

This LINDY USB 2.0 Cat.5 Extender 50m is composed of a transmitting and a receiving unit with 4 USB
ports and enables a USB host device to send data up to 50 metres. It is powered over RJ45 which means
that when the included power supply is connected to the transmitter, so no power supply is required for
the receiver, allowing for discreet installation.

Package Contents

 Local/Transmitter Unit
 Receiver Unit
 USB 2.0 A/B male cable (approximately 50cm)
 Multi-Country Power Supply, 24V 0.5A
 LINDY Manual

Features

 Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
 Integrated four port USB hub
 Supports distances up to 50 meters using Cat.5e (or better) UTP/STP cables
 True plug and play without any driver installation
 Supports all major Operating Systems with USB support
 Transmitter and Receiver units both feature integrated mounting brackets

Specification

 Transmitter: Input Port 1x USB 2.0 Type B, Output Port 1x RJ45, Socket for PSU
 Receiver: Input Port 1x RJ45, Output Port 4x USB 2.0 Type A
 Dimensions: 5.8 x 6.7 x 2.3cm (Transmitter), 11 x 6.4 x 2.3cm (Receiver)
 Weight: 91g / Transmitter, 160g / Receiver
 Temperature Range: 0° - 40° C (operating), -10° - 70°C (storage)
 Humidity: max. 80% (operating), max. 95% (storage)

Installation

1. Connect the transmitter to a USB port on the host computer by using the included USB cable.

2. Connect the power adapter to the transmitter unit.

3. Place the receiver unit near the USB device(s) in the desired remote location.

4. Connect the transmitter to the receiver unit by using a Cat.5e (or better) cable (not included!).