Lindy 42615, 42616 User Manual
USB 2.0 Data Transfer Cable
User Manual English
LINDY No. 42615 – PC Version
LINDY No. 42616 – PC & Mac Version
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (JULY 2010)
User Manual English
Introduction
Thank you for purchasing the USB 2.0 Data Transfer cable, this cable enables you to quickly move data
between your computers, without the need to install drivers or software, everything you need is included in
the cable! Data can be transferred to and from computers running any combination of the supported
operating systems.
Package Contents
USB 2.0 Data Transfer Cable
This Manual
System Requirements
PC Version
Windows® 2000/XP/Vista/7
PC & Mac Version
PC Version
Windows 2000
Windows XP
Windows Vista
Windows 7
PC & Mac Version
Windows 2000
Windows XP
Windows Vista
Windows 7
Mac OS X 10.4 or above
Windows® 2000/XP/Vista/7, Mac OS X 10.4 or above
An available USB Port (on each computer)
Features
Allows easy bi-directional data transfer between two computers
Fast data transfer rate of up to 16MByte/s
Simple plug and play installation, no additional drivers required
Integrated software provides an easy to use interface for data transfer
Cable Length: 1.8m
Additional Features of the PC & Mac Version
File/Folder Synchronisation
Outlook Synchronisation
Internet connection sharing
Optical Disk Drive sharing
- 1 -
User Manual English
Installation
PC Version
1. Simply attach the Data Transfer Cable to an available USB port on each of the computers you want
to connect
2. When using Windows 2000/XP, the cable will automatically be detected and the EasySuite file
transfer interface will open, you may now start to use the application
3. When using Windows Vista/7, the cable will automatically be detected and you will be presented
with the following
4. Double click Run EasySuite.exe
5. You will the encounter a User Account Control, click Allow/Yes to start the installation
PC & Mac Version
1. Simply attach the Data Transfer Cable to an available USB port on each of the computers you want
to connect
2. When using Windows 2000/XP, the cable will automatically be detected and the “GoSuite” interface
will open, you may now start to use the application
3. When using Windows Vista/7, the cable will automatically be detected and you will be presented
with the following
4. Select Open folder to view files
5. You will the encounter a User Account Control, click Allow/Yes to start the installation
6. When using Mac OS X, a GoSuite CD Icon will appear on your desktop, double click it
7. The GoSuite folder will open, double click on the GoBridge icon to start the application
- 2 -
Loading...