LINDY 38245 User Manual [ml]

Tested to Comply with
FCC Standards
For Home and Office Use!

4x4 4K60 18G Matrix

User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano

No. 38245

lindy.com

© LINDY Group

User Manual English

Introduction

Thank you for purchasing the LINDY 4x4 4K60 UHD HDR HDMI 18G 2.0 Matrix, this product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and
free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for
future reference.

Package Contents

 4x4 4K 18G Matrix
 24V 2.7A DC PSU with ~1.2m power cable, with 4 pin din plug
 1.8m Country specific IEC mains cable
 2m IR Extension cable
 IR Remote control including CR2025 3V battery
 Quick Install Guide

Features

 HDMI 2.0, HDCP 2.2, DVI
 Resolutions up to 4K2K@60Hz Including 3D 1080p
 Full 18G bandwidth and 600Mhz TMDS
 Up to YUV 4:4:4 & 48 bit deep colour
 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
 RS232, IR remote control & IP control for switching

Specification

 Input Ports: 4 x HDMI Female, IR ,RS232, RJ45, mini USB, Power
 Output Ports: 4 x HDMI Female
 Power Supply: DC 24V 2.7A
 ESD Protection Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge)
 Dimensions: 43.6 x 16 x 4.4cm (WxDxH)
 Weight: ~2kg
 Operating Temperature: 0°C ~ 40°C
 Storage Temperature: -20°C ~ 60°C
 Relative Humidity: 20 ~ 90% RH (Non-condensing)
 Power Consumption: 21W Max

Installation

Make sure all devices are switched off before making any connections! Once all the connections have
been made, switch on the devices in this order: displays, HDMI Matrix, source devices.

Connect the source devices such as a DVD player or games console to the HDMI matrix input ports.
Then connect the high definition displays to the HDMI matrix output ports. When all the connections are
made, connect the power supply and switch on.

Operation

User Manual English

Front panel

1. IR WINDOW: The remote control will need to be pointed at this window to control switching

2. POWER BUTTON: Press the button to power the Matrix on/off

3. LOCK: Press the button to lock all the buttons on the panel; press again to unlock

4. A-D BUTTONS: Press a button to set the input source

5. 1-4 LED: The LED will indicate which source is set to display on which output

Rear Panel

1. INPUT 1-4: Connect your HDMI sources to these input ports

2. OUTPUT A-D: Connect your HDMI displays to these output ports

3. IR IN: Connect the included IR extender cable to this port, ensuring the remote is in direct line of
sight of the receiver.

4. RS232: Connect a PC or control system with a 9 pin cable to transmit RS232 commands

5. CONTROL: Connect to an active network for telnet and Web GUI control

6. SERVICE: Manufacture use only

7. POWER: Connect the supplier 24V DC power supply to this port

Remote Control

1. POWER: Press to power the Matrix or put it in stand-by

2. OUTPUT A: Press buttons 1-4 to select the input port to display on output A

3. OUTPUT B: Press buttons 1-4 to select the input port to display on output B

4. OUTPUT C: Press buttons 1-4 to select the input port to display on output C

User Manual English

Matrix

Remote Controller

PIN

Definition

PIN

Definition

1

NC 1 NC

2

Tx 2 Rx

3

Rx 3 Tx

4

NC 4 NC

5

GND

5

GND

6

NC 6 NC

7

NC 7 NC

8

NC 8 NC

9

NC 9 NC

Command Name

Description

Description of Parameter

AN

Switch Output A to Input N

N=1~4

BN

Switch Output B to Input N

N=1~4

CN

Switch Output C to Input N

N=1~4

DN

Switch Output D to Input N

N=1~4

IN

Switch All Output to Input N

N=1~4

AB…..N

Switch output AB….to input N

N=1~4

SETIP

<x.x.x.x><x.x.x.x><x.x.x.x>

Setting IP, SubNet,

GateWay(Static IP)

X=0~255

IPCONFIG

Display The Current IP

Configuration

NONE
RSTIP

Set IP Configuration to DHCP

NONE

P0

Power Off

NONE

5. OUTPUT D: Press buttons 1-4 to select the input port to display on output D

RS232 Protocols

Baud Rate: 115200bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1

Telnet and RS232 Commands

User Manual English

P1

Power On

NONE

STOREN

Store Current I/O to Position N

N=1~4

SHOWN

Show Current Port N I/O

Position

N=1~4
PRESETN

Preset the store I/O Position N

N=1~4

NameN N1

Name port N as N1

N=1~4

N1=ABCDEFGH(Max

Length=8)

ST

Show Unit Firmware Version

NONE

EMN

Setting EDID Mode N

N=1(Standard), 2(TV)

RS

Routing Reset to Default

NONE

USBISP

Update FW by USB

NONE

HELP(?)

Display all available
commands

NONE

?

Display all available
commands

NONE
QUIT

Quit Telnet

NONE

Note: All RS-232 commands will be not executed unless followed with a carriage return. All commands
are case sensitive.

Telnet Control

To access the telnet control in Windows 7, click on the ‘Start’ menu and type “cmd” in the Search field
then press enter.
Under Windows XP go to the ‘Start’ menu and click on “Run”, type “cmd” and press enter.
Under Mac OS X, go to GoApplicationUtilitiesTerminal

Once in the command line interface (CLI) type “telnet”, then the IP address of the unit and hit enter.

Type HELP or ? to list all the commands.

User Manual English

WebGUI Control

On a PC/Laptop which is connected to an active network system, open a web browser and type the
device’s IP address (192.168.1.50) on the web address entry bar. The browser will display the device’s
Switch, EDID settings and system Settings.

Type in the username: admin and password: admin to enter the interface.
The Switch tab allows the user to edit input and output settings and allows setup or recalling presets.

Press one or multiple output buttons then press the input button to set the input to select output.

User Manual English

By clicking the edit button (marked in red) on each output and input you can edit the output/input name.

Clicking preset set button (marked in red), and click any one set could save current setting as preset set,
press the edit button on preset (marked in blue) to edit preset name.

Clicking preset recall button (marked in red), and click any one set could recall pre-setting set.

User Manual English

On the EDID setting page, users can setup the EDID mode to upload/download custom EDID or to
download EDID from sink.

EDID setting can be selected from the EDID mode list, it also allows four custom EDID bin files to be
uploaded.

User Manual English

To upload a custom EDID, first click the highlighted button in red, then select the file from your
PC/Laptop and click update.

Click the edit button (marked in red) to edit the name of USER mode.

You can also select from four outputs to download EDID from sink.

User Manual English

System setting page allows you to power on/off, edit basic info, such as user name or password and set
up WebGUI timeout and network settings.

Press Routing Reset to reset routing to default setting; press Fadefault to set to factory default.

Note: You will need to click on the save button once you are finished to save the network parameters

CE/FCC Statement

CE Certification

This equipment complies with the requirements relating to Electromagnetic Compatibility Standards.
It has been manufactured under the scope of RoHS compliance.

CE Konformitätserklärung

Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU für IT-Equipment und darf nur
zusammen mit abgeschirmten Kabeln verwendet werden.
Diese Geräte wurden unter Berücksichtigung der RoHS Vorgaben hergestellt.
Die formelle Konformitätserklärung können wir Ihnen auf Anforderung zur Verfügung stellen

FCC Certification

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired
operation.

LINDY Herstellergarantie – Hinweis für Kunden in Deutschland

LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus eine zweijährige
Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website
aufgelistet bei den AGBs.

Hersteller / Manufacturer (EU):.

LINDY-Elektronik GmbH LINDY Electronics Ltd
Markircher Str. 20 Sadler Forster Way
68229 Mannheim Stockton-on-Tees, TS17 9JY
GERMANY United Kingdom
Email: [e-mail] , T: [phone] [e-mail] , T: [phone]

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products

Europe, United Kingdom

In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical
and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different
ways. Please follow your national law when you want to dispose of any electrical or electronic products. More
details can be obtained from your national WEEE recycling agency.

Battery Remark:

Do not put empty batteries in your domestic waste bin as they will not be recycled. Empty batteries can be returned
for recycling at our trade counter or at your local household recycling centre.
The raw materials enclosed in batteries such as Zinc, Iron and Nickel can be reused to a very large proportion. The
recycling of batteries and disused/obsolete electronic equipment is one of the most efficient environment protection
actions you can easily take.

Germany / Deutschland Rücknahme Elektroschrott und Batterie-Entsorgung

Die Europäische Union hat mit der WEEE Direktive Regelungen für die Verschrottung und das Recycling von
Elektro- und Elektronikprodukten geschaffen. Diese wurden im Elektro- und Elektronikgerätegesetz – ElektroG in
deutsches Recht umgesetzt. Das Entsorgen von Elektro- und Elektronikgeräten über die Hausmülltonne ist
verboten! Diese Geräte müssen den Sammel- und Rückgabesystemen zugeführt werden! Dort werden sie
kostenlos entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernehmen die Gerätehersteller.
LINDY bietet deutschen Endverbrauchern ein kostenloses Rücknahmesystem an, beachten Sie bitte, dass
Batterien und Akkus den Produkten vor der Rückgabe an das Rücknahmesystem entnommen werden müssen und
über die Sammel- und Rückgabesysteme für Batterien separat entsorgt werden müssen. Ausführliche
Informationen zu diesen Themen finden Sie stets aktuell auf der LINDY Webseite im Fußbereich.

France

En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement
électrique et électronique.

Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières
légèrement différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques

ou électroniques de votre pays.

Remarque sur les piles et batteries

En tant que consommateur final, vous êtes tenus de restituer toutes les piles et batteries usagées. Il est clairement
interdit de les jeter avec les ordures ménagères ! Les piles et batteries contenant des substances nocives sont
marquées par le symbole ci-dessus. Vous pouvez déposer gratuitement vos piles ou batteries usagées dans les
centres de collecte de votre commune, dans nos succursales ou dans tous les points de vente de piles ou
batteries. Vous respecterez ainsi la loi et contribuerez à la protection de l'environnement !

Italy

Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici

ed elettronici. Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate. Ogni

stato membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del

proprio Stato quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.

No. 38245

lindy.com