LINDY 38216 User Manual

Tested to Comply with
FCC Standards
For Home and Office Use!

C6 HDMI 4x4 Matrix Premium, 100m

with HDBaseT Technology

User Manual English

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (September 2014)

No. 38216

www.lindy.com

!!! IMPORTANT !!!

Only use a direct Cat.5e/6/7 cable connection between the

HDBaseT ports. Do not connect these ports to Network or

Ethernet equipment or any active components

User Manual English

Introduction

The C6 HDMI 4x4 Matrix Premium with HDBaseT Technology supports the transmission of high
definition video (resolutions up to 1080p Full HD and 1920×1200@60Hz, including 1080p 3D*), multi­channel digital audio and control via IR, RS-232 or Web GUI/Telnet IP from four high definition sources
to four HDBaseT outputs over a single CAT5e (up to 80m) or CAT6/7 cable (up to 100m) for each
output. Output A and C have additional mirrored HDMI outputs.

It supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D
source. Power over Ethernet (PoE**) support means that compatible receivers do not need their own
separate power supplies, allowing for greater flexibility in installations and the LAN serving function
allows devices such as Smart TVs to be connected to the network/internet.

This flexible feature rich product has been designed to be used in a number of different applications,
such as:

 Domestic HDMI Matrix system
 Video/TV wall display and control
 Security surveillance and control

Package Contents

 C6 HDMI 4x4 Matrix Premium
 IR Extender Cable
 IR Blaster Cable

Specification

 Commercial advertising, display and control
 University Lecture hall display and control
 Retail Sales and demonstration

 24V/3.75A DC Adapter
 Remote Control
 LINDY Manual

 Input ports: 4 x HDMI Female
 Input resolution: 480i – 1080p
 Output ports: 4 x HDBaseT RJ-45 Female (A – D) & 2 x HDMI Female (A & C)
 Output resolution: 480i – 1080p
 Supports 1080p 3D* and resolutions up to 1200p via TV EDID setting
 Supports HDMI input up to 15 metres at 8-bit colour depth or 10 metres at 12-bit colour depth
 Supports bi-directional IR from Input and Output locations***
 IR Ports: 4 x In, 4 x Out, 1 x All In & 1 x All Out
 Audio support: LPCM 2CH, 6CH, 8CH, AC3, DTS, Dolby Digital Plus, Dolby TrueHD & DTS-HD
 Control Ports: RJ45 (Telnet & Web GUI) Serial 9 Way Male (RS-232)
 Supports PoE** (Power over Ethernet) on compatible receivers only
 Internal (STD) and External (TV) EDID Support
 Weight: 3.37 kg
 Dimensions: 436x255x48mm (WxDxH)

* 1080p 3D can only be supported using the TV EDID setting, with a 3D equipped display connected to Output A

** Power over Ethernet (PoE) functionality is only supported when using PoE enabled Receivers with HDBaseT
Technology, such as No. 38218 C6 HDMI Receiver Premium. Non-PoE Receivers such as No. 38119 C6 HDMI
Receiver and No. 38114 C6 HDMI Faceplate Receiver can be used, but require an external power supply.

*** IR Functionality is only available using No. 38218 C6 HDMI Receiver Premium and No. 38114 C6 HDMI
Faceplate Receiver

User Manual English

Overview & Operation

Front Panel

1 LCD

Displays the setting information of each input and output setting.

2 IR Window

IR Receiver window (accepts the remote control signal of this device only).

3 POWER

Press this button to power the device on/off. The LED will illuminate green when the power is on, red
when it is in 'Standby' mode.

4 LOCK

Press this button to lock all the buttons on the panel; press again to unlock. The LED will illuminate when
locked.

5 MENU

Press to access the menu system for EDID and IP settings, e.g. press once to select EDID setting from
STD (internal) 1 or TV (external) 2 then press it again to confirm the selection. Press the MENU button to
confirm the input or output selection.

6 IN/OUT and 1 – 4 / A – D

Press the OUT button and then the number buttons to select the required output ports, and press IN
button and then a single number button to select the required input source, finally press the MENU
button to confirm the selection. For example, if Outputs A & B need to be set to Input 1 and Outputs C &
D need to be set to Input 2, then the following sequence of button presses need to be performed:
Press: OUT > A > B > IN > 1 > MENU, and then press: OUT > C > D > IN > 2 > MENU.
Note: If the menu button is not pressed to confirm the selection will not be changed.

Side Panel

These are fan ventilation areas, DO NOT block these areas or
cover them with any object. Ensure there is adequate space
around the unit for air to circulate.

Remote Control
1 POWER

Press this button to switch on the device or set it to standby mode.

2 1 - 4 IN

Input port selection 1 - 4.

3 A - D OUT

Output ports selection A - D. Note: IR Matrix control from Zones only
require the user to select the desired input.